Jump to content

Anyone try out performance mods on 2007 Denali?

GeEkStEr

Recommended Posts

GeEkStEr Enthusiast

GeEkStEr

Posted
Posted

Just got an 07 Denali and since I am a motorhead, I wanna know if anyone has tried ANY of the performance mods on ANY 07 model (Tahoe, Escalade, Denali..etc).

 

I took a look at the tByrne website and all they have is that Volant intake...is it any good??

 

Looking to do mainly bolt-ons, like intake, headers, exhaust, and chip mods. If there is any forced induction setups out there I would even consider that. a Denali with a turbo or supercharger would be sweet.

 

Thanks in advance.

  • 2 weeks later...
ultrasound New Member

ultrasound

Posted
Posted

I just ordered the Airaid intake system for my 07 Denali XL, I also orderd the Gibson Exhaust catback setup for an 07 Escalade ESV for it as well since Gibson doesnt have a part nuber for a 07 Denali XL, i figured that one should work. I'll keep you posted

hcvone Enthusiast

hcvone

Posted
Posted
Just got an 07 Denali and since I am a motorhead, I wanna know if anyone has tried ANY of the performance mods on ANY 07 model (Tahoe, Escalade, Denali..etc).

 

I took a look at the tByrne website and all they have is that Volant intake...is it any good??

 

Looking to do mainly bolt-ons, like intake, headers, exhaust, and chip mods.  If there is any forced induction setups out there I would even consider that.  a Denali with a turbo or supercharger would be sweet.

 

Thanks in advance.

 

 

 

 

I have had 3 Volant air intake systems, after having many K&N FIPK's and a few others the Volant is the best I have had, looks stock and does not make the drone sound like most do, and give good performance. I have the exhaust from GM performance (looks like it's made by Corsa) , Preditor has a hand held system for programming the computer, will install that until I get it tuned by LS1 Edit like I did on my 03' Escalade. :chevy: Waiting for long tube headers to come out, and there are a few companies working on superchargers for the 07's too. :crazy:

  • 2 months later...
ryandugas New Member

ryandugas

Posted
Posted

Definately go with K&N air intake, the chrome one. It shows up in HP. Also get you a Cat back Corsa exhaust. Price is high, but my truck sounds better then a corvette. I'm bout to go with the twin turbos.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • GAMark
      Road Master Active Suspension

      By GAMark · Posted

      Has anyone run these on their 2500?
    • Erfar
      Oil Change

      By Erfar · Posted

      have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • cherryred21duramax
      Can anyone decode a VIN to determine if this truck has had emissions issues or a recall?

      By cherryred21duramax · Posted

      Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...