Jump to content

Bad cluster


Recommended Posts

Posted

I realize there are some posts regarding this subject, but I wanted to get a compiled list of the possible replacements (other than OEM). So for those of you who know where to get them or have got them, please give some feedback. I'm looking for a new cluster (not used) and prefereably an Escalade or SS style. Please advise. Thanks

 

Sam

Posted
I realize there are some posts regarding this subject, but I wanted to get a compiled list of the possible replacements (other than OEM). So for those of you who know where to get them or have got them, please give some feedback. I'm looking for a new cluster (not used) and prefereably an Escalade or SS style. Please advise. Thanks

 

Sam

 

I purchased a new Escalade Cluster from GMPartsdirect.com. THis was about 4 years ago. I asked my local dealer where they sent their clusters for repair. I contacted them directly and for $60 I pulled my old cluster in the parking lot, brought both of them in (so they could verify mileage) and they programmed the new cluster with the current mileage. 5 more minutes in the parking lot and the new cluster was in and working with correct mileage.

Posted
I purchased a new Escalade Cluster from GMPartsdirect.com. THis was about 4 years ago. I asked my local dealer where they sent their clusters for repair. I contacted them directly and for $60 I pulled my old cluster in the parking lot, brought both of them in (so they could verify mileage) and they programmed the new cluster with the current mileage. 5 more minutes in the parking lot and the new cluster was in and working with correct mileage.

 

Part number? Cost?

Posted

I just bought a new cluster from us speedo for $249 shipped. i got the north face cluster.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,837
    Total Members
    8,960
    Most Online
    bellssn690
    Newest Member
    bellssn690
    Joined
  • Who's Online   5 Members, 0 Anonymous, 718 Guests (See full list)

  • Latest Articles

  • Posts

    • Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • you might read through the info on gmupfitter.com for your truck, to find a good power source.
    • Melling I believe is/was the OEM on the lifters who explored this problem some years ago. The white paper they generated on the topic indicated two items of note when I read it. 1.) They only fail on the switch. Prevent the switch, prevent the failure. 2.) The majority fail due to deposits messing up the timing of that switch. Anyway that's what I got from it.    Mine have always been active, 195K+ now, and my oil maintenance is surgically clean.    Of course this assumes good parts. That is no heat treat issue or machining flaws. I get comfortable that these issues are in the rearview mirror by about 30K. IMHO naturally. 
    • Yes, the key seems to be with the half tons that if it has the Z71, then it definitely has the two speed. What got me was that the two speed AND the lower geared towing package option could not be chosen together the last few years unless it was mated up to the 6.2. Want the 3.0 duramax and 3.73 tow gears ... nope, can't get the two speed transfer case ( neighbor son realized that after he had bought his used 3.0 half ton .. where the frick is the low range ? ! ).    I am still unsure which truck series, the half ton or the HD truck that the original poster is referring to for sure other than yes his question is in the HD section of this forum but that doesn't guarantee the question got asked in the right section.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...