Jump to content

Gmt-900 Torque Specs?


Recommended Posts

Posted

Does anyone have a resource that lists propper torque specs for things like:

 

-lug nuts

-front suspension components

-rear suspension components

-u-bolts

 

Havent had much luck finding anything, so thanks in advance.

  • Replies 47
  • Created
  • Last Reply
Posted

I can tell you right off the top of my head that lug nuts are 140 ft.lb.

I'd have to look the other stuff up...Is it 2 or 4wd?

Posted

OK,I went with 4wd,See if this helps you.....

 

2008 Chevrolet Silverado - 4WD | Sierra, Silverado (VIN C/K) Service Manual | Suspension | Front Suspension | Specifications

 

Fastener Tightening Specifications

Application

Specification

 

Metric

English

 

Brake Hose Bracket Bolt

9 N·m

80 lb in

 

Brake Hose Clip Bolts

12 N·m

106 lb in

 

Hub and Bearing Assembly to Steering Knuckle Bolts

180 N·m

133 lb ft

 

Lower Ball Joint Stud Nut

125 N·m

92 lb ft

 

Lower Control Arm to Frame Nuts

175 N·m

129 lb ft

 

Shock Absorber Module to Frame Nuts

50 N·m

37 lb ft

 

Shock Absorber Module to Lower Control Arm Bolt - 1500 Series

50 N·m

37 lb ft

 

Shock Absorber Electrical Connector

20 N·m

15 lb ft

 

Shock Absorber Nut - 1500 Series

890 N·m

59 lb ft

 

Shock Absorber Nut - 2500 Series

24 N·m

17 lb ft

 

Shock Absorber to Lower Control Arm Bolts - 2500 Series

80 N·m

59 lb ft

 

Spring Jounce Bumper Nut - 2500 Series

30 N·m

22 lb ft

 

Stabilizer Shaft Insulator Clamp Bolts

50 N·m

37 lb ft

 

Stabilizer Shaft Link Nuts - 1500 Series

23 N·m

17 lb ft

 

Stabilizer Shaft Link Nuts - 2500 Series

23 N·m

17 lb ft

 

Torsion Bar Crossmember to Frame Bushing Bolt

95 N·m

70 lb ft

 

Torsion Bar Support Link Bolt

95 N·m

70 lb ft

 

Upper Ball Joint Stud Nut

50 N·m

37 lb ft

 

Upper Control Arm to Frame Nuts

190 N·m

140 lb ft

 

Wheel Drive Shaft to Front Hub Nut

240 N·m

177 lb ft

 

Wheel Speed Sensor Mounting Bolt

18 N·m

13 lb ft

 

 

2008 Chevrolet Silverado - 4WD | Sierra, Silverado (VIN C/K) Service Manual | Suspension | Rear Suspension | Specifications

 

Fastener Tightening Specifications

Application

Specification

 

Metric

English

 

Leaf Spring Mounting Nut

200 N·m

148 lb ft

 

Rear Leaf Spring Shackle Nut - 1500, 2500, 3500

95 N·m

70 lb ft

 

Rear Shock Absorber Upper Bolt - 1500, 2500, 3500

115 N·m

85 lb ft

 

Rear Shock Absorber Lower Bolt - 1500, 2500, 3500

115 N·m

85 lb ft

 

Rear Spring/Hanger Bolt

50 N·m

37 lb ft

 

Rear Spring Stop-3500

50 N·m

37 lb ft

 

Rear Stabilizer Shaft Insulator Nut - 3500

32 N·m

24 lb ft

 

Rear Stabilizer Shaft Link Bolt (Frame Side of Link) - 3500

95 N·m

70 lb ft

 

Rear Stabilizer Shaft Link Nut (Bar Side of Link) - 3500

53 N·m

39 lb ft

 

Rear Suspension Jounce Bumper

32 N·m

24 lb ft

 

U-bolts - 1500

100 N·m

74 lb ft

 

U-bolts - 2500/3500

160 N·m

118 lb ft

Posted

Thanks a million. Where did you find all that stuff?

Yup, its a 4x4. Do they make any 900s with the Z-71 package in 2wd?

Posted
Thanks a million. Where did you find all that stuff?

Yup, its a 4x4. Do they make any 900s with the Z-71 package in 2wd?

I work for a GM dealer.

And yes,You can get a GMT900 2wd Z71.

  • 3 weeks later...
  • 2 weeks later...
Posted

MS3DALE- Rich- since you have that spec book handy, could you possibly give me the torque spec for my 1500 LT1s-

1) rear spring shackle bolts,

2) bed mounting bolts

3) and OEM hitch mounting bolts?

I figured I could just guess,but....

 

Thanks

Posted

The rear spring shackle bolts are listed above,Heres the rest...

 

 

Fastener Tightening Specifications

Application

Specification

 

Metric

English

 

Assist Step Body Mounting Bolts

90 N·m

66 lb ft

 

Assist Step Center Bracket Bolt

45 N·m

33 lb ft

 

Body Cable Body Side Bolt

100 N·m

73 lb ft

 

Body Cable Frame Side Bolt

85 N·m

62 lb ft

 

Body Mounting Bolt

60 N·m Plus 170 Degrees

44 lb ft Plus 170 Degrees

 

Crossmember - Front Engine Bolts LD

105 N·m

77 lb ft

 

Crossmember - Front Engine Bolts HD

70 N·m Plus 110 Degrees

52 lb ft Plus 110 Degrees

 

Engine Protection Shield to Frame Rail Bolts

20 N·m

15 lb ft

 

Engine Splash Shield Bolts

12 N·m

106 lb in

 

Frame Brace to Frame Bolts

50 N·m

37 lb ft

 

Oil Pan Skid Plate Bolts

28 N·m

21 lb ft

 

Steering Gear Shield (9D/0320A SHIELD-STRG LNKG)

20 N·m

15 lb ft

 

Tow Hook to Frame Rail Bolts

85 N·m

63 lb ft

 

Trailer Hitch to Frame Bolts

100 N·m

75 lb ft

 

Trailer Hitch to Frame Nuts

113 N·m

83 lb ft

 

Transfer Case Shield Bolts

20 N·m

15 lb ft

 

Transmission Mount to Support Bolts

40 N·m

30 lb ft

 

Transmission Support to Frame Bolts

95 N·m

70 lb ft

 

Pickup Box Bolt

85 N·m

63 lb ft

  • 3 weeks later...
Posted

Wow, the body mounting bolts are only 44 ft-lb? I guess i'm good with the 85 I've been going to :sigh: (it probably changes due to the longer bolts of a body lift... BDS claims 90 and PA claims 70 in their instructions)

  • 1 month later...
  • 2 weeks later...
Posted
can some one tell me the torque specs for steering linkage on a 2008 gmc sierra 4x4 z71 1500? Thanks. I looking for the part that attaches to the knuckle.

 

 

Fastener Tightening Specifications

Application

Specification

 

Metric

English

 

Idler Arm Nut (at the Relay Rod)

62 N·m

46 lb ft

 

Idler Arm Nut (at the Vehicle Frame)

105 N·m

78 lb ft

 

Pitman Arm Nut (at the Relay Rod)

62 N·m

46 lb ft

 

Pitman Arm Nut (at the Steering Gear)

250 N·m

184 lb ft

 

Steering Linkage Shock Absorber Nut

40 N·m

30 lb ft

 

Steering Linkage Inner Tie Rod

100 N·m

74 lb ft

 

Steering Linkage Outer Tie Rod Nut

60 N·m

44 lb ft

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • The “engine hours” display is there because the truck detects the key presence as you were thinking.   My first step would be to call a dealer service person and ask if this a known issue and how they deal with it. If you don’t get meaningful advice there, i would try a couple of DIY things before bringing it in for troubleshooting/repair.   It sounds like a mechanical key detection switch is stuck, but I have not actually seen what the internals look like. Maybe spray some Caig Deoxit (electrical contact cleaner) in the key hole and work the key in and out in case it’s an electrical contact cleanliness issue.  If that doesn’t work, next apply whatever lubricant GM recommends and work the key in and out a few times.    Good luck with it. 
    • Carbon on valves would be the least of my worries on a light duty, 1500-series pickup with 357k provided the engine still ran halfway decently. Everything else is likely toast, on its way out, or has already been mauled to death by cheap mechanics and backyard fixes. Those kinds of trucks nickel and dime a guy to death.   I wouldn't think having the top end cleaned once or twice would be a big deal on a 5.3 but maybe it is?
    • I wonder how much carbon is on all those high mileage valves?
    • When I had a Bumper subscription for a few days when I needed to run title histories on cars I was looking at, I decided to look up a few of my old/past vehicles.   My 2015 Silverado was still actively registered and it last sold in 2024 with 160k on the clock. No idea if that's on the original engine but someone's keeping it on the road or the original AFM stuff is still going.   It used 0w20. I remember feeding it Mobil 0w20 AFE for the first 30k of its life on <5k OCI's.     Edit: Just did a nationwide search on Autotrader for 2015-2025 Silverados with 5.3's and sorted by highest mileage first.   357k 352k 292k 291k 290k 277k 271k 268k 266k 259k 256k   High mileage on a modern 5.3 doesn't seem all that uncommon, but that's just searching mostly dealer ads on Autotrader. FB Marketplace has all kinds of high mileage 5.3's going back to 2007    
    • I can't say I have ever heard of someone getting that type of mileage out of a set of tires even though they rotated on a regular basis but without a doubt if the front end gets wear and those tires are no longer able to track straight it scrubs them off, and driving style and road surface make a huge difference as well.    However that is not what prompted me to comment as it was the new tire theme of sitting in storage waiting to be used scenario. I am sure some tires can last for quite a while in storage if its not too warm and out of the sunlight but unfortunately some tires the way they their rubber compound is formulated they can age and dry out even in a reasonably decent storage location. My brother ran into this maybe three years ago when he was looking at the tires that were on his dually truck and a combination of wear on the rear ones and noticing that the front tires had some cracks around the sidewall of the tire not far from the bead but he had replaced only the front ones not long ago with 2 of the remaining 6 he had left from the initial two sets of takeoffs he had all bought at the same time .... 10 years ago ! ( the years fly by, a truck that only gets used a bit to haul a camper during the summer and sits in a shed for a large part of the year ). That second set of 6 tires, two he had put on the front prior like I said and they had very little wear but those cracks were now present. So we go into the shed where the other 4 tires had been stored all this time and every one of them had the same cracks in the sidewalls and so in the end it amounted to throwing away 6 brand new but 10 year old takeoff tires into the dump that he got a deal on at a tire shop because they aged out. They were a Ford factory equipment BFG tire and those tires did not age well compared to some tires I've seen far older then that and did not show that type of aging. True, they always say up here anyway that 7 years is sort of a limit for age by rights, we don't have the intense prolonged heat that many of you have down in the states that just cook tires and depends on where the vehicle sits when not in use. GB, another words maybe had you bought a set of tires to store it would have been fine as long as you used them up fast enough but there are no guarantees when it comes to rubber, tires or of that other type stored in some guys wallets 😆
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...