Jump to content

What Is The Recomended Rating For A Tow Strap For A Full Size Crew Cab


Recommended Posts

Posted

I am looking at recovery straps and a Warn 3" strap rated at 21,600lbs is over $100. Is this enough? Why are these straps so expensive?

 

Edit: I mean recovery strap NOT tow strap

Posted

Depending on what you need it for. The general rule of thumb is 3 - 4 times your trucks weight and what your gettin out of, so some thick mud will put you at the 4 times, but something that doesn't add extra weight and friction would only be 3 times.

Posted

I use straps from Walmart. They cost $20 to $30. I have two that I have had for almost 5 years. They have been used to recover trucks and tractors from the mud as well as dragging logs, pulling down trees, golf ball skinning deer, securing loads on trailers and dragging a scrap boat and trailer up a muddy hill in the rain not realizing the boat was full of water. I broke one of them dragging a tree that was not quite cut away from its roots. I tied it back together with square knot and have continued to use it. They were sufficient to drag a 5200 pound truck out of the mud when it was buried up to the frame twice. The second time a D4H was used to drag it out.

Posted

That should be enough though it does seem kind of high price wise. Probably because it says Warn on it. Though if you look at tow ropes, you will find that it is quite cheap.

Posted

I went with a 3x30 rated at 25,000. I got mine at a local parts store. Think I paid 70. Probably could of found it cheaper, but I didn't have one and I was on my way to rescue my brothers stuck friends...

 

IMG_1670.jpg

 

IMG_2019.jpg

 

755744020_R2Cet-O.jpg

Posted

I have two on hand at all times. One for BS jobs (dragging trees, etc) and one for recovery. The cheap one is a 15000lb thing from the parts store and the big one is a 3"x30' 27000lb rated strap made by Erickson.

Posted

Another thing to consider if you're planning on recovering vehicles often is making some chain leads. A lot of times there won't be a nice recovery hook or nice spot on the frame to hook around, and you'll have to go farther under the car/truck. This is what destroys straps. When that strap tightens, it's going to rub on the frame and whatever else is under the vehicle and usually come out with frayed ends which is dangerous. I got my hands on some logging chain that's rated to some astronomical strength and put a "J" hook on the end and when there's not a nice tow hook, that's what gets hooked under the vehicle and my strap hooks to that. This way there's no chance of damaging my $80 strap (again).

Posted

I have always used Procomp recovery straps. They strectch a lot and then snap back to give extra pull. We have used 2x30 and broke it a couple of times. We have never broken a 3x30. I even have a 2x20 for the 4wheeler.

Posted
I have always used Procomp recovery straps. They strectch a lot and then snap back to give extra pull. We have used 2x30 and broke it a couple of times. We have never broken a 3x30. I even have a 2x20 for the 4wheeler.

 

a 3 inch sling is PLENTY, in fact thats like overkill. most slings and straps are a 3:1 safety ratio keep in mind. ive pulled 1 ton deisels out with a 1 inch 15 foot long sling just dont choke the sling always you d-rings or clevace. i use a 30 foot chain FTW!! i have straps, slings probly about 6 different kinds all between 10 and 30 feet long and a 3 ton come-a-long and a 3 ton jack haul and an assortment of d-rings and clevace's. straps are okay for just a straight pull, but if you need the jackhaul they stretch way too much. by the time you get to the end of the jackhaul the sling is still stretching. although i have 1 sling that does not stretch very much at all, its some expensive brand uses some other type of fibre good for extreme cold, i had sticky fingers down in the mine one day at work :lol: ahahaha.(it was laying in the snow for a week, i dont feel guilty at all) but if its a long pull and you need a jackhaul or come-a-long chains are the way to go. that is until you snap one and put a link thru a window.(seen that a couple times) :lol:

Posted
Another thing to consider if you're planning on recovering vehicles often is making some chain leads. A lot of times there won't be a nice recovery hook or nice spot on the frame to hook around, and you'll have to go farther under the car/truck. This is what destroys straps. When that strap tightens, it's going to rub on the frame and whatever else is under the vehicle and usually come out with frayed ends which is dangerous. I got my hands on some logging chain that's rated to some astronomical strength and put a "J" hook on the end and when there's not a nice tow hook, that's what gets hooked under the vehicle and my strap hooks to that. This way there's no chance of damaging my $80 strap (again).

 

exactly, and choking the slings wreck them too...slings are crazy when they break too. especially if they are soakin wet

Posted
Another thing to consider if you're planning on recovering vehicles often is making some chain leads. A lot of times there won't be a nice recovery hook or nice spot on the frame to hook around, and you'll have to go farther under the car/truck. This is what destroys straps. When that strap tightens, it's going to rub on the frame and whatever else is under the vehicle and usually come out with frayed ends which is dangerous. I got my hands on some logging chain that's rated to some astronomical strength and put a "J" hook on the end and when there's not a nice tow hook, that's what gets hooked under the vehicle and my strap hooks to that. This way there's no chance of damaging my $80 strap (again).

 

exactly, and choking the slings wreck them too...slings are crazy when they break too. especially if they are soakin wet

 

 

I would much rather snap a strap then a chain. That said, I did manage to break a hitch right behind the ball on my dads truck earlier this week. Thankfully, i was towing the trucker backwards so it hit his back trailer rather then going through his windshield.

Posted

If the strength of the strap (or especially chain) is ever in question and there's nothing else to use, throw a tarp over it. If she snaps, the tarp acts as a parachute and keeps anything from coming through a window or your face. If you don't have a tarp, at the very least put a hoodie or shirt over each hook to slow it down some.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • Just don't turn the steering wheel as much?
    • Rockauto bud. I pass local stores for parts.   Findya something online. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...