Jump to content

bobbobtar

Member
 View Profile  See their activity

  • Posts

    96

  • Joined

  • Last visited

 Content Type 

Everything posted by bobbobtar

  1. bobbobtar
    I installed the Bilstein 5100's a couple weeks ago on my 2020 LT 3.0L and used the 2nd hole and I'm exactly 2" higher, looked like I could of done 2 1/2" but 2" made it level.
  2. bobbobtar
    You can order just about anything you want, I ordered all kinds of LTZ parts for my LT, all I did was get a VIN from an LTZ and take that number to the dealer parts counter, in your case it might be a little harder finding a Harley GMC to get the VIN.
  3. bobbobtar
    One of the first mods I did just can't see having it on a diesel. https://www.autostopeliminator.com/
  4. bobbobtar
    That's the one I installed in my truck, the remote just clips into the back of the mirror, supposed to have a ten year battery life.
  5. bobbobtar
    Yes, 2020 if it came with the 3.0L diesel
  6. bobbobtar
    You're going to love the diesel. Went on a short ride on Sunday (300 miles) 60% secondary roads and 40% freeway 27.9 mpg
  7. bobbobtar
    New wheels from a 2020 GMC, Sierra, side window trim from a 2019 Silverado LTZ
  8. bobbobtar
    Didn't notice any loss in mpg, but with the mod you can turn it back on, the default setting is off.
  9. bobbobtar
    I have this one on my 2020 3.0L diesel, Autostop Eliminator I've had it on since Feb 2020 never had any problems and the truck has been back to the dealer for warranty work, the tech. never knew it was there.
  10. bobbobtar
    https://www.marathonseatcovers.com/
  11. bobbobtar
    Just got my truck back from the shop after they installed the 501's and aligned the front. Looks like I could have done the install, but it would still need to be aligned, the toe was out on both sides and the camber on one side. I set the 501's at 2" and right now I'm at LF 38 1/2 RF 38 1/2 LR 38 3/4 RR 38 1/2 don't know how I came up 1 /4" more in the LR as the garage floor is level. The ride is firm not harsh, I also have Fox shocks in the rear. I'm just hoping the front settles about a 1/4" lower as I only have 20 miles on the install.
  12. bobbobtar
    WHAT I only got $11 off.
  13. bobbobtar
    https://shockwarehouse.com/index.cfm?selected_make=Chevrolet&selected_model=3820&selected_year=2020&mode=results
  14. bobbobtar
    Just ordered the Bilstien 5100 #24-293297 front adjustable shocks for my LT I'm 2 1/4" lower in the front than the rear and I will set the shock at 2" with Fox in the rear I should be good.
  15. bobbobtar
    Mine started a re-gen today couple miles before I pulled up to the drive up window at the CU, when idling the exhaust is louder and the RPM's increase a couple hundred
  16. bobbobtar
    Just bought a set of 18" tires and OEM take off wheels from this company a little high on freight, but still cheaper than buying wheels and tires separately. https://www.rpmtakeoffs.com/home.html
  17. bobbobtar
    I'd be happy with the $5000 and not push too hard. The dealer probably has a list of people waiting for any truck.
  18. bobbobtar
    This is what I use I don't have to worry about jack stands https://www.walmart.com/ip/RhinoGear-11909ABMI-RhinoRamps-Vehicle-Ramp-Pair-12-000lb-GVW-Capacity/19526658
  19. bobbobtar
    I also have the AVS Aeroskin II realy like the installation, no clips 3M tape.
  20. bobbobtar
    I paid $225 for mine installed myself dealer programed $35
  21. bobbobtar
    Here is another option fleceperformance.com/all-lights-on.html small circuit board with a diode. I used pin 10 and 22 referred to boost for which pins to use for different functions.
  22. bobbobtar
    I bought the GM fog lights from the dealer and installed everything except the jumper wire into the underhood fuse box, took it in today to have it programed and finish the wiring, I lost the sheet with the code, but still had the box they came in (serial number is on the side of the box) the tech was able to call GM help line with the serial number and the help line gave him the code. $131.00
  23. bobbobtar
    This is one of my first mods: https://www.autostopeliminator.com/collections/most-popular/products/2019-silverado-sierra-autostop-eliminator took about half an hour to do plug and play, now my default is off and by pushing the Auto Stop button it turns on, which I have only done once. Also works on 2020's
  24. bobbobtar
    I originally had a 2009 2500 6.6 Duramax and liked the power of the diesel drove it for 80,000 miles, but wasn't towing much traded it on a 2014 GMC SLT 1500 then on a 2016 Silverado LTZ 1500. When GM started talking about a six cylinder diesel I thought that would be right up my alley good fuel mileage and the power I was missing with the 5.3L. Picked up a 2020 Silverado 4x4 LT 3.0L with just some basic options end of January. The sticker was $52800 and I paid $41300 before tax and license, couldn't pass on the price. I also did the fog lights going in on Thursday to have them programed.
  25. bobbobtar

    I'm also a big fan of the 2020 3.0L diesel, but not the start/stop, I did this the first week of ownership, works just like OEM except default is off.

    https://www.autostopeliminator.com/collections/most-popular/products/2019-silverado-sierra-autostop-eliminator

×
×
  • Create New...