txab

That's the guy that was giving his married girlfriend the high-hard-one while he was telling everyone else to stay home. Was ok for him or his girlfriend to travel for their 10 toes up, 10 toes down dickin' sessions. Plus at one point he was infected with C-19 himself

Did you replace the receiver drier desiccant?

You need to pull the cover. Your leak, if it is a cracked head, won't be affected by doing so. Castech leaking head issue Thread with pics

No. Totally different animal.

Drop the political name calling..... You can make your point without it. If you can't then you have little to say

https://restartnow.io/

Ok, just a reminder...... let's cool this off a bit. Things are starting to flare. For the thread to stay open, everyone needs to play nice and not get frustrated/angry. Agree to disagree and move on

As noted. Back off on the political talk. There is a line and some are crossing. Vacations will be passed out. The Admins are letting this thread run for now. Any other time this thread and any thread like it would be shut down. Y'all have been pretty good at staying on track with only a slip here and there. So if you want to continue, play nice

People riot when they can't the Popeyes chicken sandwich! https://www.cnn.com/videos/us/2019/09/03/armed-group-demands-popeyes-chicken-sandwiches-texas-ns-orig.cnn

It's Dr. Birx, not Burke. Sounds similiar

Play nice people. Certain people's attitudes are starting to get out of hand. Stay on topic with NO PERSONAL ATTACKS

I just throw all my stuff into my ACME irridiation machine

Remember to keep attitudes in check in the thread.

Text from link above

^^ Correct

Did you replace the wiring harness as suggested to you in your other thread on this issue? Did you torque the sensors to the correct value?

Read the quoted text Of course make sure it's not the filter or gasket itself. Make sure the old gasket was removed with the old filter. Also check for oil pressure sending unit leaking and running down.

Same type of connection as radiator. Slide the black plastic ring back, pull the clip, line pops out. Reverse to install

Plenty of Youtube videos out there, just search for them. takes about 15 seconds

To me this is the definition of an exchange, not a flush and I would think this method would be preferred method. It will cause no harm. 100% fresh fluid! Agreed not going to work on a thermostat controlled trans, but neither would a flush unless bypassing the thermostat

What about systems being called a "polar vortex" Ooooooo scarey.

Ok. Everyone take a breath, and let it go. Manuals change from one year to the next. OP doesn't state what year he has. 2020 manual does address this. Prior years may not

^^^^^^ +1

From factory, iridiums

"Let her rip, tater chip" For us dumbasses...... Centistokes (cSt) - A unit of kinematic viscosity, one hundreth of a stokes. Symbol, cSt. In practice, measurements are usually stated in centistokes, not stokes. The kinematic viscosity of water is about 1.0038 centistokes Stokes - the cgs unit of kinematic viscosity, corresponding to a dynamic viscosity of 1 poise and a density of 1 gram per cubic centimeter, equivalent to 10-4 square meters per second Poise - is the unit of dynamic viscosity (absolute viscosity) in the centimetre–gram–second system of units. HTHS measures the viscosity (resistance to flow) of an engine lubricant at elevated temperatures (150°C) under constant shear, simulating the narrow tolerances and high speeds between moving parts in a hot engine