Jump to content

Crucial Development... More Gmt900 Failures.

tobias

By tobias
in The Off-Topic Bar

Recommended Posts

tobias Senior Enthusiast

tobias

Posted
Posted

Guys, go for the buy back if you can. My badges just fell right off my truck. What a POS. Must have been defective. I bet the truck doesn't last another week.

Get out now while you still can. I'm selling mine because of it. It'll be gone on Friday. :cheers:

VMax2007 Senior Enthusiast

VMax2007

Posted
Posted
only a few of mine fell off, wonder if there will be a re call ..

 

Same here, and my 4x4 stickers just peeled right off mysteriously too. Must have been the AFM that caused it due to vibration. :cheers:

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
only a few of mine fell off, wonder if there will be a re call ..

 

Why wait? You need to get out now!!! BTW, it's all Obama's fault.

tobias Senior Enthusiast

tobias

Posted
  • Author
Posted
my longhorn is falling off :lol:....DAMN AFM

 

It's probably not as long as you say it is but you should see a doctor either way. :cheers:

VMax2007 Senior Enthusiast

VMax2007

Posted
Posted
my longhorn is falling off :lol: ....DAMN AFM

 

It's probably not as long as you say it is but you should see a doctor either way. :cheers:

 

 

daddy, please refrain from attempting humor before your morning coffee (or your caffeinated drink of choice).

 

Thanks! :D

Darkanion Senior Enthusiast

Darkanion

Posted
Posted
my longhorn is falling off :lol: ....DAMN AFM

 

It's probably not as long as you say it is but you should see a doctor either way. :cheers:

 

 

daddy, please refrain from attempting humor before your morning coffee (or your caffeinated drink of choice).

 

Thanks! :D

 

 

Choice!? CHOICE!?!? There are CHOICES!?!? ohnoes.gifohnoes.gifohnoes.gif

jvmorgan Enthusiast

jvmorgan

Posted
Posted

For some reason the siverado badges on the door are unable to be removed but the tailgate badges just fell right off in a light sprinkle...your right daddy it all comes back to Obama...lol

Draenor Senior Enthusiast

Draenor

Posted
Posted
only a few of mine fell off, wonder if there will be a re call ..

 

Same here, and my 4x4 stickers just peeled right off mysteriously too. Must have been the AFM that caused it due to vibration. :cheers:

 

Mine was caused from the TM. :lol:
VMax2007 Senior Enthusiast

VMax2007

Posted
Posted
only a few of mine fell off, wonder if there will be a re call ..

 

Same here, and my 4x4 stickers just peeled right off mysteriously too. Must have been the AFM that caused it due to vibration. :cheers:

 

Mine was caused from the TM. :lol:

 

 

 

yeah, right!

 

TM can't even make a tennis ball roll in my bed, let alone making anything fall off the truck. :D

66nova Senior Enthusiast

66nova

Posted
Posted

Holy POOP!

 

I have to buy a For Sale sign today. I'm going to get rid of the piece before the AFM causes all my badges to fall off. How would I tell what kind of truck it is without them. Plus if they fall off, it would be less custom.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      Does your dealer charge you for the tire rotation on top of the oil change price ?. I haven't had any service work done at my dealer yet other than when I brought it back soon after owning it to have the front end aligned to correct the steering wheel being off center a bit. Oh they called me at least twice hounding me to bring it in for an oil change and pushing a 300.00 package of oil change and tire rotation and whatever other quick simplistic checks they would do. Only going off of what a friend gets charged for his half ton for the basic oil change and its the same amount of oil as the L8T holds, it was about 150.00. Once one buys a set of tires from most shops these days or so I believe, they will do free tire rotations and some do free tire balancing as well as free tire repairs.    Certainly doing a tire rotation is no five minute job, and definitely not at home but because I run a set of winter tires on their own wheels, I swap them at home and its a one tire at a time deal because of the tire season swap although I jack up the rear and do it and drop it back down and then raise the front and do them and coordinate the tire rotation into that process for both sets of tires. I am using a floor jack though and if I need to raise both ends at once I use a couple sets of jack stands to have all four tires off the ground. I use either an air impact or battery impact and have electric impact as well so no shortage there of easy methods to spin the lug nuts, and then retorquing the lug nuts. None of it goes quick though but my wages are cheap though ... zero. I live an hour out of town, its easier just to do things like that myself than waste a bunch of time in town and having to make an appointment and probably a special trip and sit there at the tire shop waiting for them to get my vehicle in and get it done and not screw something up in the process. 
    • mrbflat
      Clunk when coming to a stop... driveshaft/slip yoke? Mechanic couldn't recreate it

      By mrbflat · Posted

      I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Pryme
      first oil change - 2026 2500HD gas

      By Pryme · Posted

      Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Best part of this video is how it resets expectations. Wonderfully done piece. It also made clear a few points I've made from day one. Detergent oils DO NOT KEEP A MOTOR CLEAN at the recommended or longer change intervals. They just get dirty slower than a non-detergent oil and there isn't spits difference between them on this point if they carry the DEXOS license. Great thing about the license that gets missed is it assures CONFORMITY even it that means a low bar.    One thing he did not talk about that I paused on an magnified was the condition of the oil ring separator. Besides a stuck ring a plugged separator and land drain back is huge when it comes control. We see in short order improvement in control IF that is the problem.    Another item I took exception to and he did not make plain was the condition of the timing chest and under valve cover having something to do with indicating piston cleanliness. Schaeffer's Oil makes that same omission in their million mile Ford video. I'm guessing he has never torn down a Red Line HP, AMSOIL SS motor that has been on that diet from the get. What he showed in the video was a good deal of varnish. Something totally absent in Peppers 165K cover off look. I smiled because he did his at the same milage.    He also makes the mistake of assuming oil temperatures in the pan are the temperature all over the motor even though he makes note of the piston being the hottest part of the engine. that baffled me a bit.    I can tell you from personal experience and witnessing teardowns of family motors that even oils of the 1960's would keep them squeaky clean when OCI's were 1500 to 2000 miles without exception. At 3K and above you get what he experienced and the longer you leave it the quicker to gets to the junkyard.    I think his is missing a opportunity not tearing it down again when he's done killing it. Time would be his only cost. 
    • Z45
      GM discontinuing interior parts on a 5YO vehicle??

      By Z45 · Posted

      Very often the part number on the trim part is just for the vendor order/assembly plant and will not show up in the parts system.  They won't make a bunch of extra parts that were not ordered. Keep in mind, lots of these parts were made to be "just in time" parts meaning they were dedicated to a vehicles ordered and sequenced for assembly.       Also, trim parts will often say, paint to match.     

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...