Jump to content

Cooled Seat Conversion

louie730
 Share

Recommended Posts

  • 4 months later...
arad_na64 New Member

arad_na64

Posted
Posted

I`m Arad and need help for install two electrical front seat of 2007-2013 chevy tahoe or suburban or avalanche. I have some question about that and wiil be happy if some one can help me on this way.

1- Can I have wiring diagram of front seats? (picture attached) link of pictures: http://www.auctiva.com/hostedimages...,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0

2- I checked socket of seats and find two bigger wire(Red/white and black). I think main power wires are them. But when I connect 12v adapter to wires nothing happened and no movement.

3- I know the seats have many function. But I need anly movement and heat/cool function.

Thanks for reading my post.

Arad

P.s: sorry for my bad english

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

  • 4 months later...
Tnutt19 New Member

Tnutt19

Posted
Posted

Ok guys bumping this back up to the top. Anyone that can help I also need the diagrams for converting from heated to AC/ Heated.

I just received today the seats and both the memory and ac/heat modules. Any help to know what is needed next would be very much appreciated.

  • 4 months later...
ep224 Enthusiast

ep224

Posted
Posted

looks like this thing has died - but I would really like to get a hold of "rich22" to see what he offers in the way of instructions to do this... I am adding a cooled seat (driver only - at $1200 screw the passenger haha) to my 2013 suburban 2500... black leather is smoking hot.

dsr611 Senior Enthusiast

dsr611

Posted
Posted (edited)

looks like this thing has died - but I would really like to get a hold of "rich22" to see what he offers in the way of instructions to do this... I am adding a cooled seat (driver only - at $1200 screw the passenger haha) to my 2013 suburban 2500... black leather is smoking hot.

Here's his profile page...there's a link to send him a message on the page

Though, he hasn't been on here in almost a year

 

http://www.gm-trucks.com/forums/user/29983-rich22/

Edited by hammerhead611
ep224 Enthusiast

ep224

Posted
Posted

Still shoot him a message, he may happen to have the email alert on if he gets a message on here!

 

ok I PM'd "rich22" and I am holding my breath for a response. everything I have found online says you can do this - and I have talked to two (1 GM and 1 chev) parts counters (I know, I know) and they think I can do it too... I even have the seats lined up. a little hesitant to pull the trigger just yet until I get a green light from my GM mechanic... hopefully rich22 has his ears on!

  • 2 weeks later...
ep224 Enthusiast

ep224

Posted
Posted

well, still nothing from nobody that seems to have anything to add, but i'll keep going. i have a 2013 2500 suburban - KB6 wasn't an option. i have heated and airbag seats from factory. i have procured the identical seats with the addition of the cooling option as well as the door switches. i have identified that there are two wires from the truck (B10 and B11) in the truck-side harness (X303) that don't exist in my build from the factory that the new seats will need run. i am working on locating the schematics that will tell me where these wires come from...

 

any help would be GREATLY appreciated!

  • 1 year later...
paddonNZ New Member

paddonNZ

Posted
Posted

well, still nothing from nobody that seems to have anything to add, but i'll keep going. i have a 2013 2500 suburban - KB6 wasn't an option. i have heated and airbag seats from factory. i have procured the identical seats with the addition of the cooling option as well as the door switches. i have identified that there are two wires from the truck (B10 and B11) in the truck-side harness (X303) that don't exist in my build from the factory that the new seats will need run. i am working on locating the schematics that will tell me where these wires come from...

 

any help would be GREATLY appreciated!

 

Did you ever figure your seats out, i just got done installing mine in my 2007 silverado but i had to add about 10 or more extra wires to the passenger seat and about half that to the driver, i found all the diagrams i needed, which im going to add on here for other people in the future as i wasted a day sourcing through the wiring diagrams for the whole truck, just went to the dealer and reflashed the BCM with the vin from a 2009 tahoe but came up with faults and theft errors etc, must be cause the BCM has the incorrect vin number just wondering what the dealer has to do to program these in, they are unsure since its not something they have done before. hopefully someone out there can help. thanks

ep224 Enthusiast

ep224

Posted
Posted

 

Did you ever figure your seats out, i just got done installing mine in my 2007 silverado but i had to add about 10 or more extra wires to the passenger seat and about half that to the driver, i found all the diagrams i needed, which im going to add on here for other people in the future as i wasted a day sourcing through the wiring diagrams for the whole truck, just went to the dealer and reflashed the BCM with the vin from a 2009 tahoe but came up with faults and theft errors etc, must be cause the BCM has the incorrect vin number just wondering what the dealer has to do to program these in, they are unsure since its not something they have done before. hopefully someone out there can help. thanks

i have them installed but we haven't wired them. we were actually getting ready to do that this week. i am going to see if i can PM you...

  • 3 years later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...