Jump to content

Recommended Posts

Posted

I guess I'll throw mine in here. As you can see it is mostly stock here. Got a few mods you can't really see. I've seen some good tips posted in this thread. I'd like any advise or tips on some mods I can do to mine to improve it's looks. The only things I don't want to do is gas mileage killers, like lifts, level kits, and big tires. I drive A LOT of highways miles. Other than that I'm open. I been thinking about getting some chrome full length bed rails, and chrome door handles? The pin stripes are red and grey and match the Z71. I'm undecided if I want to keep them and I'm having a hard time visualizing it without them.

post-75159-1300803947_thumb.jpg

post-75159-1300803947_thumb.jpg

post-75159-1300803947_thumb.jpg

post-75159-1300803947_thumb.jpg

  • Like 1
Posted (edited)

2001 Crewcab LS S10 4.3L with 3.73 gears

IAT relocator kit

Throttle body plate

Modified throttle blade

K&N Intake

E-Fans

B&M Electronic shift improver

Jet stage 2 chip

Flowmaster 50-series exhaust

2" body lift

16x8 wheels

31x10.50 BFG K/o

IM000267.jpg

 

IM000269.jpg

 

IM000274.jpg

 

 

2003 LS Extended Cab Silverado Z71 5.3L with 4.10 gears

Wait4me Performance tune

K&N Air intake

Magnaflow SS dual exhaust

6" skyjacker lift

16x8 with 4.5" backspacing wheels

315/75r16 BFG K/O

Goodmark cowl hood

Carriage works Billet grill

Bull Bar

100_1126.jpg

 

2007 SLT Crewcab GMC Vmax 6.0L with 4.10 gears

Blackbear Performance tune

GM Performance intake

Corsa Sport dual exhaust

2" RC Leveling kit

GMC Denali grill

20x8.5 with 5.5" backspacing

Cooper Zeon LTZ 275/55r20

 

100_2618.jpg

 

2011 SLT Crewcab GMC 6.2L with 3.73 gears

Soon to be Blackbear tune

GM Denali grill

2" RC Leveling kit

20x8.5 with 5.5" backspacing

Cooper Zeon LTZ 275/55r20 soon to be 305/50r20

 

1030101129.jpg

Edited by Stevens11
Posted (edited)
I guess I'll throw mine in here. As you can see it is mostly stock here. Got a few mods you can't really see. I've seen some good tips posted in this thread. I'd like any advise or tips on some mods I can do to mine to improve it's looks. The only things I don't want to do is gas mileage killers, like lifts, level kits, and big tires. I drive A LOT of highways miles. Other than that I'm open. I been thinking about getting some chrome full length bed rails, and chrome door handles? The pin stripes are red and grey and match the Z71. I'm undecided if I want to keep them and I'm having a hard time visualizing it without them.

 

I say remove the pin stripe, and window visors, either get escalade door handles or color matched, paint your frame, remove your steps, tint your windows, paint your upper bumper plastics... And since you're not wanting to lift the front, just lower the rear, and get a stock size tire that has some nice tread.

Edited by JRLZ71
Posted
That 2003 didn't come with 4.10 gears, did it?

 

Yes it did come with 4.10 gears. In 2003, most of the Z71's on the dealers lot were 4.10's :)

Posted
That 2003 didn't come with 4.10 gears, did it?

 

Yes it did come with 4.10 gears. In 2003, most of the Z71's on the dealers lot were 4.10's :)

 

 

Wow, I did not know that half tons came with 4.10s as an option. :)

Posted

2011 GMC Sierra

Carriage Works Grille

K&N Filter

Aires Bull Bar

Chrome Mirrors

Chrome Door and Tailgate handles

 

Not done yet though.

post-63991-1300821143_thumb.jpg

post-63991-1300821143_thumb.jpg

post-63991-1300821143_thumb.jpg

post-63991-1300821143_thumb.jpg

Posted (edited)

mine 2010 4x4 z71

RC 2" level kit

Go rhino II step bars

K&N

billet chrome grill bowtie

Z71 appearance package

Corsa dual out exhaust tip

powder coated rear bumper

rear bowtie removed

lower air dam remove

 

4-7.jpg

3-7.jpg

2-7.jpg

1-7.jpg

2-6.jpg

142.jpg

1-6.jpg

4-6.jpg

5-5.jpg

15-2.jpg

6-5.jpg

7-5.jpg

8-5.jpg

10-4.jpg

 

 

 

 

you want pics you go them lmao!!!!! :P:):):lol::lol::lol::lol::lol:

Edited by sic lsx
  • Like 1
Posted (edited)

2010 Silverado Crewcab Z71 6.2L :)

 

Accessories

Tractor Supply Black Low Profile Toolbox

Line-X Spray in Bed Liner

Bestop Tailgate Step

Weathertech Floor Mats

AVS In channel Vent Visors

Cabelas Low Profile Bug Deflector

K&N Air Filter

Airraid Intake Tube

6" GM Nerf Bars

GM Accessory Exhaust Tip

GM Seat Covers

GM Bed Rail Caps

GM Mud Flaps

Auto Dim Rearview Mirror

Interior lights changed to LEDs

 

Going to Add

2" RC Level Kit - Have waiting to install

3" Rear Blocks - Have waiting to install

Turn Signal Mirrors

275 BFG ATs?

DSC02838.JPG

DSC02836.JPG

DSC01724.JPG

DSC01867.JPG

DSC03714.JPG

DSC01233.JPG

DSC03498.JPG

DSC02838.JPG

DSC02836.JPG

DSC01724.JPG

DSC01867.JPG

DSC03714.JPG

DSC01233.JPG

DSC03498.JPG

DSC02838.JPG

DSC02836.JPG

DSC01724.JPG

DSC01867.JPG

DSC03714.JPG

DSC01233.JPG

DSC03498.JPG

DSC02838.JPG

DSC02836.JPG

DSC01724.JPG

DSC01867.JPG

DSC03714.JPG

DSC01233.JPG

DSC03498.JPG

Edited by RyanbabZ71
Posted

Always nice to have a thread full of pictures... I get so tired of trying to search for a certain setup, and having to go through a million threads to try and find it!

Posted

2010 Crew Cab LT2 5.3 6L80E

-6 Inch Pro Comp Lift

-20x9 Incubus Wheels

-35x12.50 Mickey Thompson baja ATZ's

-Bushwacker Pocket Flares

-Aries Bull Bar w/6 Inch Hella Lights

-Aries Tube Steps

-Pro Comp Two Piece Stainless Skid Plates

-All Lights Changed To Led's (Inside and Out)

-GM Chrome Tail Light Guards

-GM Stainless Door Sill Guards

-Recon LED Tail Lights

-Heated Leather Seats (added)

-GM White Miroor Caps

-GM Bed Liner

-Changed Interior Rear View Mirror to Auto Dim Style

-Removed Lower Airdam

-6000K HID's

-K&N Air Intake (sanded smooth and painted)

-Flowmaster Duals

-AVS Bug Guard and Vent Visors

-Trxedo Black Max Tonneau Cover (Color Matched)

-Black Bear Tuned ( May 2011)

 

GEDC0004.jpg">

 

GEDC0005.jpg">

 

GEDC0008.jpg">

 

GEDC0010.jpg">

 

GEDC0011.jpg"

GEDC0007.jpg">

 

GEDC0002.jpg">

  • Like 1
Posted
99 silverado

- 6" RCD lift

- debadged

- black front bow tie

- black billet grille

- 18x9 Ultra Mammoth wheels

- 35x12.5 BfGoodrich Mud-Terrain tires

- 4.56 gears

- just installed eaton g80 locker in the rear

- Long Tube Thorley Headers, flowmaster exhaust,

- k&n CAI

- '06 silverado tail lights w/reverse leds

- 15% window tint in passenger and driver windows and here its called "intelligent film" in the windshield it some sort of ceramic paper that does not have color but it gives the same protection from sun and heat than a 10% tint.

- other mods that dont have to do with looks like sound system, led dome light, 900amp optima battery, viper 5901 alarm system, etc.

 

 

future plans:

- new style z71 black decals

- new style black bow tie in the tailgate

- color match the chrome part of my mirrors

- color matched door handles, tailgate handle, and OEM fender flares

- color matched '06 side moldings

- color matched bumpers

- clear smoke headlights

- not sure i'll ever do this but will love to get a '02 HD hood

 

 

awesome looking truck man, im jealous

 

 

thanks man! i bought it in December! i'm enjoying it so much! cant wait to get a custom tune to have even more fun :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,866
    Total Members
    8,960
    Most Online
    Greg3160
    Newest Member
    Greg3160
    Joined
  • Who's Online   1 Member, 0 Anonymous, 481 Guests (See full list)


  • Latest Articles

  • Posts

    • Late reply, but yes—it works on the SLT trim. Compatibility comes down to the plastic shroud shape behind your mirror, not the trim badge itself. On the SLT with auto-dimming, it uses a plug-and-play Y-harness off the mirror/rain sensor power, so no need to run wires down to the OBD port. If anyone's ever unsure about fitment, just drop a photo of your mirror housing and we can double-check it.   Appreciate the detailed feedback on the install! On the windshield glare—we actually took feedback like yours and developed a dedicated CPL (polarizer) filter to cut down dash reflections on sunny days. If you're still running the cam, shoot me a DM. I'd be happy to send a CPL filter over for you to test out—no charge. 
    • There are no stickers in your glovebox?
    • Look at the numbers on the stickers in the door jam...
    • Yes, every time the developer updates his code, you must recompile. I will private message you with the latest because it changes pretty much with every version.
    • After I wrote that reply I went for a ride. 85 F out. So trans started at 85 F and it shifted the same as it did an hour latter at 168 F. I've never actually recorded the to cold to shift point but it is under 32 F before they start hanging on to a lower gear or leaving the converter unlocked. Both intended to heat fluid.    Yes, brake or bake. Absolutely.      Your welcome. True research ended decades ago. Field trials are still in play.    There is a thing called oxidation onset temperature. This is the heat related oxidation not the O2 exposure kind. For mineral oil that starts at 140 F. So what happens after 140 F? Each 20 F cuts fluid life in half! Does using a Full Synthetic improve that? Yes! By how much? Depends on the base oil type and a few other factors. But enough to notice. Some esters are even higher. There are even synergies between types the will raise it higher than any one component is alone.    Then there is "Hindered" oils. Antioxidant additives. Hindered Polyol Esters can sit at 500 F for years in a turbine.   When a blender brags his oil will 'take 500 F" in service he doesn't specify for how long. Water will dance on a 500 F hot plate for several seconds. @newdude put up a chart showing the relationship between fluid temperature and it's life in an automatic transmission. Here's a version of that chart for Group III based oils. These temperatures are those in the pan as observed as 'normal'. that is you drive as you do for as long as you do under what load you ask of it and whatever that temperature is this graph applies to. Flash temperatures of a few minutes isn't what his means.    Note that fluids held at a constant 240 F have a service life of only 20K miles. 220 F explains the factory exchange limit, eh? My equipment I keep under 180 F and I'm good if the cooler will hold it as low as 140 F. But that's me.   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...