Wheel Spacers

anthony2558 · February 25, 2014

Anybody put wheel spacers on their truck. I just feel that my stock wheels with 275/70R18's are tucked to much inside the wheel wells. I was thinking of a 2" kit. Anyone have pics or suggestions on what would be my best options. Thanks.

Sent from my Nexus 5

LTZ2014 · February 25, 2014

I ran spacers on my old truck

anthony2558 · February 25, 2014

Remember what size?

Sent from my Nexus 5

Ljrussell94 · February 25, 2014

2" and 1.75 will work. But 1.5" and below you will have to cut the nipples off the studs. I did it in my old truck and had no problems. I think you would be happy with 1.25" spacers if you have stock wheels and tires. I think only up to 1/2" you can throw on witjout havin to bolt it on

anthony2558 · February 25, 2014

Good info. Thanks. 1.25 to 1.50 is what I was thinking to. I'm just not a big fan of cutting the stock bolts.

Sent from my Nexus 5

LTZ2014 · February 25, 2014

The 1.5" you only have the cut the nipple off the stud. You don't even cut any thread

anthony2558 · February 25, 2014

The 1.5" you only have the cut the nipple off the stud. You don't even cut any thread

Sweet. I def gonna try that size. Thanks.

Sent from my Nexus 5

anthony2558 · February 25, 2014

Found these on amazon. They are not hub centric. Thoughts on hub centric versus non hub centric.

4 Chevy Silverado 1500 Wheel Spacers Adapters 1.5 inch thick fits ALL Chevrolet Silverado 1500 Model Trucks by easywheel http://www.amazon.com/dp/B00CA8VFQS/ref=cm_sw_r_udp_awd_21sdtb1MD2D86

Sent from my Nexus 5