Jump to content

Tie Down Plugs are covered by bed liner


Recommended Posts

Posted

 

The tailgate has a panel maybe 6-8" high and almost full width that allows your to access the latch and handle from the inside. It is secured by 8 torx head flat head screws.

 

The only reason I needed in there was to install the actuator that unlocks the tailgate when you unlock the truck doors.

 

Some people have had the bedliner installers spray right over it. This covers the panel seam and all the screw heads. The only way to get it open is to cut along the panel seam and try to dig out the screw heads from the liner material. Very difficult with a harder liner material like Line-X.

 

 

Which is what I'll need to do because I want to add the power tailgate lock.... Wish I would have caught it when I first bought the truck.

Posted

 

Which is what I'll need to do because I want to add the power tailgate lock.... Wish I would have caught it when I first bought the truck.

Take it to the dealer or installer and have them fixed it.

  • 2 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...