Jump to content

thoughts on a jayco toy hauler on a 1500 silverado

rcmike

By rcmike
in Towing, Hauling & Hitches

Recommended Posts

crankman Enthusiast

crankman

Posted
Posted

Update- New toy to haul the toy hauler, thread can die now,,lol thanks for all the advice

Please tell us the details of new ride? :driving:

  • 1 month later...
Josh121 Enthusiast

Josh121

Posted
Posted

your 1500 truck would tow it no problem. your gonna be 1000 pounds under your max towing capacity, and wont have a problem with tongue weight when using a Weight distributing hitch.

BlackZ71Silverado Senior Enthusiast

BlackZ71Silverado

Posted
Posted

Update- New toy to haul the toy hauler, thread can die now,,lol thanks for all the advice

 

Congrats, you did it right!

 

That truck will tow what you need much easier and you will be safer on the roads because it's designed to handle the weight......Enjoy!

rcmike Enthusiast

rcmike

Posted
  • Author
Posted

Congrats, you did it right!

 

That truck will tow what you need much easier and you will be safer on the roads because it's designed to handle the weight......Enjoy!

. Thanks ,,, yes it's night and day difference . I feel a lot better with towing now.
  • 8 months later...
JamesNobles New Member

JamesNobles

Posted
Posted

Toy haulers are good for shipping or traveling. The main thing I like is about the cargo area or storage area. This gives us an option to haul toys. My friend used it and had a good experience. He gathered more info about the toy hauler by reading out the blogs and articles of the vehicle shipping companies(http://www.wewilltransportit.com/).

  • 1 month later...
rcmike Enthusiast

rcmike

Posted
  • Author
Posted

He has a 2500 now.

 

I had the 2500 with a duramax for about 4 months but loved it so much it got traded for a 3500 dually with duramax. I love this truck so much I went out and got a bigger Winnebago TH. I'm planning on keeping the dually for a while. thanks

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,913
    Total Members
    8,960
    Most Online
    Smitty462
    Newest Member
    Smitty462
    Joined

  • Who's Online   5 Members, 1 Anonymous, 698 Guests (See full list)

  • Latest Articles

  • Posts

    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...