Jump to content

Recommended Posts

Posted

Not sure what's going on, I have a 2014 ltz, when I going slow, like turning or in drive through for example. My steering starts jerking and console says service stabilitrack or parking assist off. Seems really dangerous because if it does it while I'm driving I'm hitting the ditch lol. It's completely random and can't get it to malfunction. Only things done to truck are RTS hids and 2" leveling kit that were put on about 4 month ago. Problem just started. Any ideas or advice is appreciated thanks guys!

Posted

Good morning CaseysLTZ,

I am sorry to hear that you are experiencing these steering concerns, and understand how frustrating these intermittent situations can be. I recognize that at this time you are reaching out to other forum members for advice. However, I would be more than happy to offer additional assistance if you decide to work with a dealership. Please private message me with more details if this is something that interests you.

All the best,

Julianne M.

GM Customer Care

 

Not sure what's going on, I have a 2014 ltz, when I going slow, like turning or in drive through for example. My steering starts jerking and console says service stabilitrack or parking assist off. Seems really dangerous because if it does it while I'm driving I'm hitting the ditch lol. It's completely random and can't get it to malfunction. Only things done to truck are RTS hids and 2" leveling kit that were put on about 4 month ago. Problem just started. Any ideas or advice is appreciated thanks guys!

Posted

Yes I will be bringing it into th dealership... But honestly wanted the opinion of others because I'm sure this has happened to someone already before. Plus it seems to always be the same with dealership, "they couldn't find the problem" lol

Posted (edited)

Mine gave me the service stabilitrack warning and disabled it on me when i was using it and needed it. This was a few weeks ago. The truck is 5 months old and had at the time about 8500 miles. I was descending down a very steep and loose gravel narrow road with a 400ft sheer cliff on the side with no shoulder. I used the downhill descent for the first time to attempt to hold the truck at about 3 mph. This was working well for about 30 seconds so i comfortably left my foot off from hovering the brake. While turning a hairpin curve at this steep grade the truck gave way and the downhill descent gave out and the warning came on the dash. Thankfully i reacted in time to avoid death. When the ground leveled off, I turned off the truck and turned it back on again and the message/dash light disappeared. I haven't used the downhill descent control since (for fear). I haven't mentioned it to the dealer but i'm sure they would brush it off since there is no active dash warning.

 

I know this isn't the exact same scenario you mentioned, but thought it was worth mentioning since the error is the same.

Edited by piratepenguin
  • Like 1
Posted

This is normal at very slow speeds. You will most likely notice this happening at the same places. What is happening is the truck senses that the front wheels are pushing or "scrubbing" a little when turning at a sharp angle and then the "electric nannies" do their thing.

Posted

This is normal at very slow speeds. You will most likely notice this happening at the same places. What is happening is the truck senses that the front wheels are pushing or "scrubbing" a little when turning at a sharp angle and then the "electric nannies" do their thing.

Seriously? What would be an appropriate use of the descent control? Going down a paved mountain road? If so, i drop it in 2nd or 3rd gear depending the speed I'm looking to maintain.

Posted

Well nothing that extravagant has happend to me, but it's a problem and just wanted to know if anyone has had something similar and what the outcome was

Well nothing that extravagant has happend to me, but it's a problem and just wanted to know if anyone has had something similar and what the outcome was

Posted

There is no possible way tha this is normal... The wheel jerks so hard left to right it would break my wrists... Any idea what would cause this?

Posted

Not sure what's going on, I have a 2014 ltz, when I going slow, like turning or in drive through for example. My steering starts jerking and console says service stabilitrack or parking assist off. Seems really dangerous because if it does it while I'm driving I'm hitting the ditch lol. It's completely random and can't get it to malfunction. Only things done to truck are RTS hids and 2" leveling kit that were put on about 4 month ago. Problem just started. Any ideas or advice is appreciated thanks guys!

My truck is currently and has been at the Dealership for the same thing for over 2 weeks now. They have tried the TSB PIT5405A with no success. Luckily in my case the tech was able to duplicate it (for the first time in the history of the world) and it scared the poo out of him according to the Service manager. They have tried new battery cables and a new fuse box and had some longer test drives scheduled for yesterday as that is when this typically occurs. I STRONGLY SUGGEST FILING A COMPLAINT ON SAFECAR.GOV as you have mentioned this is a very serious electrical issue. The service manager explained that the truck loses voltage which when it does that the truck forces the steering wheel back to "zero" to reset its self and thats what causes the wheel to violently jerk out of your hand. There are many complaints on this and GM is having trouble because it is "intermittent". But like yourself have noticed and explained that it does it after longer highway drives (approx 20 miles all highway) with the AC going. I am waiting until about lunch time today for an update on how the "longer" test drives went since they replaced cables and fuse box.

 

Please keep me updated and I have been in contact with NHTSA & GM's Executive office..which is useless since they are basically a middle man between myself and the district manager here in PA, who took almost 2 weeks to get back to him. I feel GM is dragging their feet on this issue and may cause someone to die because of it.

  • 2 weeks later...
Posted

Okay guys update on my problem. Was on the INTERSTATE today to see a movie out of town, had the ac blowing, radio on, wife rolls down window, then rolls it back up. As she rolls the up, I head a ding ding ding, looked at panel, says parking assist off, and radio volume stops working. Get off interstate, on the exit ramp, stabilitrac starts flashing on dash. So I pull off into the parking lot of the theatre, and as I'm pulling in, the steering wheel starts, once again violently jerking left to right ac turns off stabilitrac flashing, AND THE TRUCK DIES IN MIDDLE OF ROAD/PARKING LOT!!!! Texted my salesman going to try to bring truck in tomorrow morning. Somethings deff wrong!

  • Like 1
  • 5 months later...
Posted

Okay guys update on my problem. Was on the INTERSTATE today to see a movie out of town, had the ac blowing, radio on, wife rolls down window, then rolls it back up. As she rolls the up, I head a ding ding ding, looked at panel, says parking assist off, and radio volume stops working. Get off interstate, on the exit ramp, stabilitrac starts flashing on dash. So I pull off into the parking lot of the theatre, and as I'm pulling in, the steering wheel starts, once again violently jerking left to right ac turns off stabilitrac flashing, AND THE TRUCK DIES IN MIDDLE OF ROAD/PARKING LOT!!!! Texted my salesman going to try to bring truck in tomorrow morning. Somethings deff wrong!

Posted (edited)

I have had no issues with my recently purchased 2014 Silverado until just now. Twice in last couple days the parking assist has popped on screen with the steering wheel jerking. Just happened when trying to park at rest stop and truck turned off in process. Scary stuff. Definely will get truck into shop when I get back home.

Edited by PhillyCheese
  • Like 1
Posted (edited)

Hey man, I'll save you the trouble... my truck went in different shops more than 4 times for the same problem and they couldn't fix it. (Same problem your having) I traded that son of a bitch in while I could and got a 2016 Canyon. DONE DEAL

Edited by CaseysLTZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have A 2020 1500 5.3 8 speed. LTZ. Transmission problems since 60,000 miles. Started when I go to store in morning to get my morning coffee before work leave truck running get back in put it in drive/ rev no movement step on gas a little slams into gear. Put in neutral step on gas little shake then put in gear and gose.  Shut truck off start .. ok now at stop light stop truck after a few seconds feel a little kick if that doesn’t happen stuck in 3/4 gear shut truck off wait few seconds and start usually ok again. If you down shift manually ok as long as you get into 1st before stop. If not it kicks . I WANT A NEW TRANSMISSION. Now I want a new truck it just hit 80,000 IDK IF ILL BUY CHEVY CAUSE THEY STILL HAVE THE PROBLEM AND REFUSE TO RECALL . Oh I’ve changed the fluid and filter 3 times now. And yes used mobile 1 not ac/delco cause it’s not meeting the requirements that mobile is did use ac/delco filter 
    • Of course refrain from political debate but I myself have very dismal hope for what is all going on up here every where we turn so I nodded my head when I saw this joke.     
    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...