Jump to content

2016 Silverado, Z71 floor mat fitment?

jamoka3

By jamoka3
in Modifications & Accessories

Recommended Posts

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

Looks like that part# is a match on Chevy's website. I have the floor liners version and like them. Looks like these are similar but maybe not as much coverage as the liner.

 

 

Sent from my iPhone using Tapatalk

jamoka3 Enthusiast

jamoka3

Posted
  • Author
Posted

Does anyone have a pic of the Z71 mats installed in there Silverado? Im curious to see if the stock pic matches the coverage. Because its looks like the Chevy floor mats above ^ have better coverage then the stock pic of the Z71 mats... :dunno:

last truck Enthusiast

last truck

Posted
Posted

the picture in the ebay ad shows the coverage and it appears to be less, floor mat verses floor liner, they are not the same.

ChevyRoofer Senior Enthusiast

ChevyRoofer

Posted
Posted

the picture in the ebay ad shows the coverage and it appears to be less, floor mat verses floor liner, they are not the same.

 

This. These are the premium floor mats, not the premium floor liners that are pictured above

 

The premium floor mats are a POS, they're just the regular all-weather with a logo on them. Same coverage and durability.

 

The weather liners on the other hand are very nice and what I had planned on/will be getting.

eTruckGear Enthusiast

eTruckGear

Posted
Posted
If you need any accessories, would love to help. We have couple of toys for you at www.eTruckGear.com and offer honest service ( with 100 % positive Amazon feedback we try hard to be there for the customer)

Stop by and take a look. Tonno Pro is a nice brand to look at. Not that well known but super quality and low price. We are also Weathertech approved, meaning warranty applies as opposed to purchases on Amazon. Don't like Weathertech? We have Husky or Maxliner. Amp Research, Thule, Warn, Rhino Rack. Will be glad to help.

Delta Hotel Enthusiast

Delta Hotel

Posted
Posted

8d680ef143da01d7692605f819bf1a87.jpg8aca52cb800167f1b57ff5b53ec75c0d.jpg

 

 

Sent from my iPhone using Tapatalk

Who makes those?

 

WeatherTech or GM, OEM ?

 

Thanks.

 

Dave

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      2 speed transfer case optional now?

      By newdude · Posted

      This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • newdude
      Different requirements for oil filters?

      By newdude · Posted

      2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Grumpy Bear
      Different requirements for oil filters?

      By Grumpy Bear · Posted

      Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Coastie05
      give me some tips to make my truck look better

      By Coastie05 · Posted

      Go back to OEM wheels. 
    • newdude
      2020 Trailboss 6.2 replacement

      By newdude · Posted

      Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...