Jump to content

Recommended Posts

Posted

I just bought a 91 GMC 3500 7.4 that was a special order when new. Original owners bought it to tow a large horse trailer. It has a second battery that is isolated from the main battery but is charged by the alternator. Any idea what's it for? The guy I got it from owned it since 94 and he doesn't know either.

Posted

Usually for running electric. Maybe lights or a heater for the trailer.

 

 

Sent from my iPhone using Tapatalk

Posted

Id assume running aux lights in the horse trailer But also they have lots of lights so without a second battery it can draw alot from a single battery.

Posted

It came from factory or dealer installed like this. Does camper special models come with two batteries? I'm going to go get the truck tomorrow and maybe find out more about it. The second battery is the original battery so I'm sure it's bad now.

 

Sent from my K88 using Tapatalk

Posted

The original window sticker shows the additional battery was an option. Kinda cool finding the original window sticker with a bunch of other papers on this truck. The original owner specked it out nice.

 

Sent from my K88 using Tapatalk

Posted (edited)

before the obd2 control, the more amps drawn by battery triggered a tickle to the alternator to do more.

 

 

I would have let it go.. up to you.

electric trailer brake used to be quite a monster.

frame muncher.

 

Today you could go from 600cca to 1000cca..and not even notice. the alternator just feeds battery with a brain now.

feeds the truck demand another way.

2 batteries worthless.

maybe diesel gurus play with them.

 

up until 96, the batteries claimed to be just for starting, acc key on.

that was so sick..decades of looping on batteries doing it all.Precision claim was terrible.

Today, that claim sticks. Battery is for starting.. no looping a bomb anymore.

 

big alternator will feed your truck. Little battery to start.

Edited by barry G
Posted (edited)

Common option for vehicles that towed a camper or trailer of some kind with need for electrical power to the trailer. I ordered it on a 1996 1500 4x4 just because I could, for no special reason. In the snow belt it was a option for snow plow equipped trucks. Dealers often installed them as accessories.

Edited by elcamino
Posted

I have a second battery and use it to run a winch. A winch can drain your battery in nothing flat. I can combine the two batteries for extra power, or reverse their role. It's also nice to switch to the auxiliary battery when you get in your truck to go to work at o-dark-thirty and find that your main battery has given up the ghost because it's old, or your son left the map light on two days ago, or.... A battery separator/combiner from Hellroaring Technologies can be invaluable if you're running off-road or frequent the middle of BFE. And, it helps to upgrade to (at least) a 150A alternator.

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • https://www.msn.com/en-us/autos/general/what-makes-this-1963-ford-falcon-red-rocket-special/vi-AA2asoRz?ocid=winp2fptaskbarhover&cvid=be9c1b4f79ff4211c526abd60f6da012&ei=16
    • True. My statement needs qualification. "For a shade tree mechanic, re-assembling the front engine to achieve a rough baseline timing of 0 degrees, as is approximated and indicated by common visual indicator mark alignment, measured with a human eye capable of 20/20 vision *with correction, I am reasonably confident that I have followed the outlined procedures/ prescribed methods for verifying baseline timing."   😉   In the end, the computer sets the timing, it's continuously variable based on sensor input, and the distributor only has a degree or two of physical adjustability intended for dialing in the final setting for cam ****** once everything is back together. But even that final value is acceptable within, I believe, +/- 3 degrees.   I thought my exhaust project was going to be a bear. To my surprise, the old clamps came right off last night, and I was able to unbolt all the hangers instead of having to muscle the rubber mounts. The old cat is ready to slip off the factory y-pipe. The rest is ready to come out with one or two cuts, and I've got a fresh blade waiting. I love living where rust isn't a thing.    
    • I work at a Chevrolet dealership & hear it all believe me.  Just reads like there's going to be a fist fight over filters.  Can't get enough, continue!!
    • I just can't think of the exact term GM uses for that higher gvw package without looking at the website but basically sort of a trailering package and I imagine it may also have been created to skirt around the licensing fee differences between a3/4 and 1 ton that apply in some states although ironically I believe in some states its the reverse that a 1 ton is the cheaper truck to license over a 3/4 ton. It makes no difference here in Alberta but oddly enough a 1 ton through my insurance company is a bit cheaper to insure over a 3/4 ton as its based on the insurance statistics they generate.    For sure when ever you do have the chance to weigh your truck and to be fair, try to have the fuel tank full or nearly so rather than give yourself a false sense of the truck being lighter by having an almost empty tank.    In my other comment I was mentioning stock sized tires and partly in case someone was reading this and thinking they could lower their pressure down to what your aftermarket tires are able to do with your empty truck as that is a vastly different picture in the leeway you have to play with for running minimum pressures while remaining safe. I will say also that its easy to see from reactions of truck owners that may have been more used to owning a half ton in the past or a car and be it on a forum like this or in person etc that they get so wrapped up in that placard pressure sticker that they can't get their head wrapped around the fact that an HD truck due to how much it can carry can also vary the tire pressures drastically lower than those pressures ( typically more so for the rear axle on stock sized tires ) when empty vs some car that isn't made to carry much so the tire pressures can't be lowered since it needs almost that much pressure just to carry the empty car.    If I ever do find myself in the states with this truck, I will only be too happy to switch it over to the US measuring system as then I will understand all the dash readings. The only thing that is off for me slightly with US measurements is US miles per gallon as I grew up with the Imperial gallon and to this day up here anyway speak in Imperial miles per gallon ( I don't do that on this forum though as that would confuse everyone for no good reason ). 
    • Yes that's right, it's the upgrade that includes the overload spring and all that stuff.   Someday when I'm empty and going by a scale I'm going to stop in and get some weight readings.   Exactly  you should have the ability to change individual settings, in in Canada so I'm driving with kph but then I'm stuck with kpa when I want psi lol    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...