Jump to content

Recommended Posts

Posted

Thanks for following up. I was all set to get diesel, and then, unfortunately I kept doing more research. I started seeing a common theme of $8000 fuel injector jobs. When I looked up GM's warranty, it said they specifically exclude fuel injectors and other related items from coverage. So after much more agonizing, I've now decided to go with gas. I know I'll be the one in the right lane watching the diesels blow by, but at least I know exactly what I'm dealing with on the 350 days a year I'm not towing. Plus, while my daily commute is 23 miles right now, there is the potential for that to get much shorter in the future, and from what I've read, the diesel won't like that. Thanks again to everyone who has offered me advice.

Posted

Thanks for following up. I was all set to get diesel, and then, unfortunately I kept doing more research. I started seeing a common theme of $8000 fuel injector jobs. When I looked up GM's warranty, it said they specifically exclude fuel injectors and other related items from coverage. So after much more agonizing, I've now decided to go with gas. I know I'll be the one in the right lane watching the diesels blow by, but at least I know exactly what I'm dealing with on the 350 days a year I'm not towing. Plus, while my daily commute is 23 miles right now, there is the potential for that to get much shorter in the future, and from what I've read, the diesel won't like that. Thanks again to everyone who has offered me advice.

 

 

They exclude fuel injectors from the warranty? Even during the first 3/36k?

 

It's hearsay but I've heard of several people getting fuel system/injectors fixed under warranty. Although, the root problem was probably the pump or something else and the injectors were collateral damage.

Posted

From GMC website:

 

Also excluded is the starter motor, entire pressurized fuel system (in-tank fuel pump, pressure lines, fuel rail(s), regulator, injectors, and return line) as well as the Engine/Powertrain Control Module and/or module programming.

Posted

From GMC website:

 

Also excluded is the starter motor, entire pressurized fuel system (in-tank fuel pump, pressure lines, fuel rail(s), regulator, injectors, and return line) as well as the Engine/Powertrain Control Module and/or module programming.

Wow.

 

The 2001 injectors got extra coverage due to all the issues they had with them. Surprised the newer models (which had far less issues) would be excluded.

Posted

Wow. I am assuming that it's common amongst brands for the diesel 3/4-1 ton trucks?

 

Scary. Yes, the overall number of problems is very low in comparison to the number of vehicles sold. However I can't imagine plunking down that kind of money and having a problem and then having to pay several thousand to fix it while still under factory warranty.

Posted (edited)

I did some research on my own, and I think you are misinterpreting the coverage.

 

There is a 3/36k bumper to bumper. There is also a 5/100k powertrain warranty. The way I read it, is the fuel system is not included as part of the extended powertrain warranty... but still covered under the 3/36k.

 

Additionally, when I looked up Dodge's warranty coverage, they state:

 

5.2 Federal Vehicle Emission Warranty - 6.7L Diesel Equipped Heavy Duty Truck

A. Parts Covered for 5 Years or 50,000 Miles

Diesel equipped heavy duty trucks are 2500 and 3500 models only.

Federal law requires DaimlerChrysler to warrant the following emissions parts for 5 years or 50,000 miles, whichever occurs first.

 

• Air system controls;

• exhaust system (includes catalysts);
• electronic fuel injection system, including

injector;
• exhaustmanifold;
• exhaust gas recirculation valve and control

system (includes EGR cooler);

 

  • exhaust pipes (between exhaust manifold and catalyst);

  • fuel pump, fuel lines and fuel injectors;

  • intakemanifold;

  • on-board diagnostic-system components;

  • oxygen sensors and oxygen control module;

  • positivecrankcase-ventilation(PCV)valveororifice;

  • powertrain control module;

  • transmission-control module;

  • turbocharger.

 

So I think we need to be careful in commenting on a lack of warranty on the fuel system... that simply is not the case.

 

GM states:

 

Defects and performance for heavy duty truck emission control systems including those found in 6.6L Duramax®Diesel Engines are covered for the first 5 years or 50,000 miles, whichever comes first.

Edited by jj46
Posted

Of course the fuel system is covered under warranty. Everything is covered under bumper to bumper warranty except wear items for 3y/36k.

Posted

Yes, everything is covered under the 36,000 mile bumper to bumper warranty. I was referring to the power train warranty. I'm assuming that, with my luck, this problem wouldn't pop up in the first 36,000 miles. And I don't think we need to be careful commenting on that which GMC explicitly states on their website under "Pro Grade Protection".

 

 

"Exclusions: Excluded from the powertrain coverage are sensors, wiring, connectors, engine radiator, coolant hoses, coolant, and heater core. Coverage on the engine cooling system begins at the inlet to the water pump and ends with the thermostat housing and/or outlet that attaches to the return hose. Also excluded is the starter motor, entire pressurized fuel system (in-tank fuel pump, pressure lines, fuel rail(s), regulator, injectors, and return line) as well as the Engine/Powertrain Control Module and/or module programming."

Posted (edited)

As stated above, the fuel system is covered under the 5 year/50k mile coverage, per federal law.

 

Not sure that the standard 5/100k would be any better for you? I drive 20k per year, but I realize the national average is less than that. Point being, you'll likely run out of miles before you run out of 5 years.

Edited by jj46
Posted

6.2 NHT 1/2 ton is the way to go!

6.0 power is terrible as is the fuel mileage, 2500's are great for towing but to not allow them the option of 6.2 is silly.

 

My last rig was Denali Yukon xl, worked well with auto ride self leveling and was the only way to get 6.2.

Now have 2017 6.2 max tow Sierra, headed to Fla in 3 wks.from NY

Trailer is #8000

post-82791-0-58026600-1477232432_thumb.jpg

post-82791-0-58026600-1477232432_thumb.jpg

post-82791-0-58026600-1477232432_thumb.jpg

post-82791-0-58026600-1477232432_thumb.jpg

  • 4 years later...
Posted

I have the same situation. My Suburban 15 LT it has the tow package in it which increased our tow max from 6300 lbx to a max tow weight of 8300 lbs. We are in the process of purchasing a 2019 Jayco Jay Flight which is just 32' length with a dry weight of (including 2-30 lbs lp tanks)  just under 6200.  I am concerned that it won't pull it. "It's a Suburban they can do anything". LOL

 

I was also told that you don't travel with the water tanks full or your grey tank full which takes a lot of added weight out of the equation, which we didn't even think of that.  

 

Do you think I will be ok.  The dealership is hooking us up with the proper sway bars, braking and equalizers and are saying we should not have a problem. Can anyone give me piece of mind and let me know if I will be able to pull without blowing my motor or transmission? I can't buy both a truck and a trailer.  

 

Posted
1 hour ago, LMP said:

I have the same situation. My Suburban 15 LT it has the tow package in it which increased our tow max from 6300 lbx to a max tow weight of 8300 lbs. We are in the process of purchasing a 2019 Jayco Jay Flight which is just 32' length with a dry weight of (including 2-30 lbs lp tanks)  just under 6200.  I am concerned that it won't pull it. "It's a Suburban they can do anything". LOL

 

I was also told that you don't travel with the water tanks full or your grey tank full which takes a lot of added weight out of the equation, which we didn't even think of that.  

 

Do you think I will be ok.  The dealership is hooking us up with the proper sway bars, braking and equalizers and are saying we should not have a problem. Can anyone give me piece of mind and let me know if I will be able to pull without blowing my motor or transmission? I can't buy both a truck and a trailer.  

 

It will pull it and you'll know it's there behind you.  Be mindful about how much stuff the Missus brings aboard!  Change your fluids frequently, like every 36K and maybe even right after a heavy tow session if the temps got up above 220.  It's cheap insurance.  

Posted

Thanks for your reply. I am the missus lol. Everything I have researched doesn't look good. Just afraid dealership wants the sale of the trailer and telling us well be fine to make sure sale happens then I break down, now 2 vehicles need to be towed.

 

We'll find out next week when we pick it up.  And yes I'm a light packer.

 

Thanks again.

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined
  • Who's Online   4 Members, 1 Anonymous, 4,881 Guests (See full list)

  • Latest Articles

  • Posts

    • Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
    • He has his dad’s newer truck he’s put away. He has several old cars he rotates between him and his family. I’ve seen a restored square body and a SS Chevy truck he’s sometimes drives. He did raffle off a new suburban recently. As much as he is watched if he drove new stuff as a rule we’d know it. It would be fine by me. I don’t care what people prefer. I got one more new one in me. I’d rather my wife get one. I can’t get her out of the Genesis. Don’t tell anyone. I want her to get an electric truck. I want to put a generator in the back. Just because. She hasn’t bit yet.
    • Yes, you must have seen my thread on the Blazer. HOT GARBAGE, but I love them anyway. I'm convinced every car guy has a soft sport for an S/T series somewheres. Probably even a Panther too, if I'm being an honest car guy. That doesn't mean they aren't junk. And they definitely don't get better with age. I sometimes play with old cars, but that's by choice. I don't rely on them and they aren't my everyday fleet.   Derek plays the common man on Youtube and that's no doubt where he started. Now he has Youtube money (and Motortrend, etc). You think his crews and his wife ride around in old beaters when they're chasing him and his wrecks across the country? No he's got newer and nicer stuff for that, you'll see glimpses of it in the footage.
    • You refuse to own anything made in this century yet you reportedly own... a 2007 Silverado, which is now almost 20 years old. The dissonance.... turn up your hearing aid?   You clearly don't understand the government contracting process, brother. We send people to die on front lines, keep the public safe, and make people's husbands, wives, children enter burning buildings with equipment from .....wait for it.....   ...the lowest bidder....   Just because something is used for a long time doesn't mean it's good. But it might be cheap and plentiful.   Please, continue to whine about new trucks in a thread dedicated to new trucks, which you've said you'll never own. We get it. Go tell everyone how you're stuck in time on a Panther forum. I mean, Jesus, an 86 isn't even one of the good Panthers.
    • It really is comical when people don’t agree or see the reason some people prefer the older vehicles. They become condescending. All the while they may be busting their knuckles on old vehicles. I have found memories of swapping out engines in my old GM cars in a weekend without much hassle. Unlike today. One wrong move a computer will shut you down. Even on something as easy as a brake job. There’s a pretty comical YouTuber called the car wizard. A garage owner who puts it all in perspective. Another Vicegrip garage that’s shows just how tough the old stuff is. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...