Jump to content

Recommended Posts

Posted

After seeing all of the disgusting cabin air filter pictures, it would be nice to head this off. Does anyone know where the air intake location is ? Just got a 2016 and being in a heavily treed area that is full of rodents of all sizes, would like to make a screen to pre-filter this air. Thanks.

  • Like 1
Posted

No way a rodent is making into that intake system. It is on the wiper cowl.

Posted

Did it get changed for 2016 ? All the posted pictures speak for themselves, MICE, LEAVES, STICKS, could start a campfire with all the stuff collected off the top of these filters.

Posted (edited)

Did it get changed for 2016 ? All the posted pictures speak for themselves, MICE, LEAVES, STICKS, could start a campfire with all the stuff collected off the top of these filters.

 

That doesn't fall through the grate though. If you've got sticks and mice, they aren't coming through the cowl plastic screen, they are coming in from under it right through the intake sheetmetal. And they will probably get through the screen too lol.

Edited by 15HDriver
  • 1 month later...
Posted

I see this thread died but wanted to reopen the question. I just purchased a 2017 sierra crew 1500 slt. The last truck i bought (which i still own) was a 2006 lt3 Silverado crew with the duramax. I live in a wooded area and have had major mouse issues. My 2006 was a haven for mice. To this day i have never found how the get into my cab. And am worried they will get into my new truck. My 2006 had no cabin filter so i tore apart the cowling only to discover the intake was already screened so the mice were not getting in through there. In my 2006 however large the opening its big enough for a mouse caught in a glue trap to still pull himself out (this has happened twice) without me being able to find him. The only logical opening was the rear body vents that exot between the bed and cab but that is the one place i have never found them. Side note over the course of 2 days last year i caught 11 mice in the cab of my truck.

 

My wife has a 2014 sienna with car seats and lots of food crumbs from the kids. When we first got it the mice started getting in. But i found that the air intake was not screened. I put a wire mesh over it and since then have never had another mouse inside.

 

Would be nice if there was anyone who could advise the potential openings for mice in these Silverados and potentially the new sierras. Btw i own a car lift and have had my truck in the air and not found the entry point.

 

Cab fresh and dryer sheets under the hood don't really work either.

Posted

UPDATE: Just last week I was cleaning out the last of the falling leaf debris, getting ready for winter, when I noticed a squareish rubber plug with 2 nipples on it, laying loose by the fender and the battery. Not having any idea where this thing came from, got me to looking. Turns out both ends of the firewall, up top by the black windshield wiper trough have these flapper type vents, like the type in the back of cab. The passenger side fell out, thats what was laying by the fender. With a mechanic mirror and a light could see where this thing goes. Reason it FELL off is, holes are too big, or nipples are too small,or both. Was fun trying to get these nipples back in the holes blind. ONLY TO HAVE IT FALL RIGHT BACK OUT. Some silicone adhesive fixed that. Now with that rubber plug out, the whole mouse family could dance the jig as they went through there. I KNEW there had to be a way people were getting those mulch piles on top of their cabin air filters. I found mine, yous may vary.

  • Like 1
Posted

Good info. Having mice get into the vehicle much less chewing up the wires inside or out is a huge issue for many.

Posted

UPDATE: Just last week I was cleaning out the last of the falling leaf debris, getting ready for winter, when I noticed a squareish rubber plug with 2 nipples on it, laying loose by the fender and the battery. Not having any idea where this thing came from, got me to looking. Turns out both ends of the firewall, up top by the black windshield wiper trough have these flapper type vents, like the type in the back of cab. The passenger side fell out, thats what was laying by the fender. With a mechanic mirror and a light could see where this thing goes. Reason it FELL off is, holes are too big, or nipples are too small,or both. Was fun trying to get these nipples back in the holes blind. ONLY TO HAVE IT FALL RIGHT BACK OUT. Some silicone adhesive fixed that. Now with that rubber plug out, the whole mouse family could dance the jig as they went through there. I KNEW there had to be a way people were getting those mulch piles on top of their cabin air filters. I found mine, yous may vary.

Did you happen to take a pic of this rubber plug? Is your truck a 2016 1500? Sounds like you may have stumbled onto a possibly important issue here Mr SwampThing..

Posted

S

 

I see this thread died but wanted to reopen the question. I just purchased a 2017 sierra crew 1500 slt. The last truck i bought (which i still own) was a 2006 lt3 Silverado crew with the duramax. I live in a wooded area and have had major mouse issues. My 2006 was a haven for mice. To this day i have never found how the get into my cab. And am worried they will get into my new truck. My 2006 had no cabin filter so i tore apart the cowling only to discover the intake was already screened so the mice were not getting in through there. In my 2006 however large the opening its big enough for a mouse caught in a glue trap to still pull himself out (this has happened twice) without me being able to find him. The only logical opening was the rear body vents that exot between the bed and cab but that is the one place i have never found them. Side note over the course of 2 days last year i caught 11 mice in the cab of my truck.

My wife has a 2014 sienna with car seats and lots of food crumbs from the kids. When we first got it the mice started getting in. But i found that the air intake was not screened. I put a wire mesh over it and since then have never had another mouse inside.

Would be nice if there was anyone who could advise the potential openings for mice in these Silverados and potentially the new sierras. Btw i own a car lift and have had my truck in the air and not found the entry point.

Cab fresh and dryer sheets under the hood don't really work either.

sounds like you need some outdoor cats. That will fix your problem.

Posted

After seeing all of the disgusting cabin air filter pictures, it would be nice to head this off. Does anyone know where the air intake location is ? Just got a 2016 and being in a heavily treed area that is full of rodents of all sizes, would like to make a screen to pre-filter this air. Thanks.

Wow I'm glad I saw this thread and comment. After just 15k miles, garage kept, this filter is still dirty as hell.

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

post-148733-0-30583200-1481146144_thumb.jpg

Posted

The filter doesn't get dirty by sitting it the garage, it gets dirty when you go out and drive it :cheers:

  • Like 2
Posted

Wow I'm glad I saw this thread and comment. After just 15k miles, garage kept, this filter is still dirty as hell.

did you stage that pic by putting dirt on that filter? haha that is disgusting

Posted (edited)

The filter doesn't get dirty by sitting it the garage, it gets dirty when you go out and drive it :cheers:

 

Haha, yeah I reread some of the posts here, and my idea of how leaves get into and on the cabin air filter was quite wrong. I pictured a vehicle sitting outside somehow being more prone to crap falling in,, but that isn't how that works lol.

Edited by 2015_Sierra

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,427 Guests (See full list)


  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...