Jump to content

Recommended Posts

Posted

People that say trucks today aren't quick are either hard to please or haven't been driving very long. My 14 on E 85 rivaled many of my performances cars of the 70s- 2000s. Even the famous 70 chevell SS 396-350 HP stock on street tires. I've seen singal cabs 5.3s on E-85 run mid 13s on this web site, slow indeed.

 

I agree that we live in a "golden era" of car performance compared to the 60s and 70s.

 

What I'm saying is all this "5.3l performance is the stuff! Makes the 4.3l look like a slug!" is kind of a moot point when 5.3l trucks are over 7 second 0-60 vehicles and plenty of grocery hauler sedans, cute utes, and mini vans that are in the 5s and 6s. (and some in the 4s)

 

It's kind of like saying "My slug is a bit faster than your slug", and the 6.2l is the only 6 second 0-60 in the bunch. Trucks just aren't built for speed.

 

And above all, if your 1999-2013 5.3l was fast enough for you, the 4.3l is as well.

 

For the right price and tow needs <4000lbs, the 4.3l can be a good deal. Not if the only difference is the spec sheet cost of the 5.3 upgrade, but if you can get one $2-$3K cheaper due to less demand, makes sense to me.

  • Like 3
Posted

 

I agree that we live in a "golden era" of car performance compared to the 60s and 70s.

 

What I'm saying is all this "5.3l performance is the stuff! Makes the 4.3l look like a slug!" is kind of a moot point when 5.3l trucks are over 7 second 0-60 vehicles and plenty of grocery hauler sedans, cute utes, and mini vans that are in the 5s and 6s. (and some in the 4s)

 

It's kind of like saying "My slug is a bit faster than your slug", and the 6.2l is the only 6 second 0-60 in the bunch. Trucks just aren't built for speed.

 

And above all, if your 1999-2013 5.3l was fast enough for you, the 4.3l is as well.

 

For the right price and tow needs <4000lbs, the 4.3l can be a good deal. Not if the only difference is the spec sheet cost of the 5.3 upgrade, but if you can get one $2-$3K cheaper due to less demand, makes sense to me.

I have no problems with V6s, I have a mid sized SUV with a V6 and a full sized sport sedan with a V6. Both will blow the doors off my 94 impala ss I had. My SUV is close to the 0-60 times of my trailblazer ss I had. I don't feel the need to modify for performance anymore. Of course I'm older so that could have something to do with it.

 

 

Sent from my iPhone using Tapatalk

Posted (edited)

http://www.zeroto60times.com/vehicle-make/honda-0-60-mph-times/

 

That's what I'm talking about, 5/6 Honda Acoords faster than a 5.3l truck, and 3 of them much faster.

 

If soccer moms in Accord sedans can lay rubber at the lights and drive away from your 5.3l truck I don't think a person has any business talking about 4,3l being "slugs".

 

4.3l and 5.3l trucks are pretty slow in the vehicle world, the .7 - 1 second faster (depending on source) I've seen doesn't make me think "Thank god I have a 5.3l! Might be able to dust that Camry next to me if they have the 4 cylinder!"

 

At the end of the day if you're getting to 60 in 7.3 or 8.3 seconds you didn't buy the vehicle for speed.

Edited by Brian S.
  • Like 1
Posted

I'm hoping a tune will fix my 4.3 slug, I have driven other makes and models with V6's in them and I know GM could make them with a little more zip. I'm not talking about racing anyone or any of that nonsense, I'm simply talking about zipping out into traffic and such. I was given a 2017 Expedition as a rental while my truck was in the shop and that had the 3.5 in it and that thing had some zip. If Ford could do it, GM can. I think GM just has them programmed to optimize fuel mileage.

I know the new 4.3 is faster than the older V8's, as some punk kid was coaxing me to race him in his dualed out Tahoe as we ended up side by side at a couple red lights, I ended up blowing his doors off.

Posted

Imo what they feel like and what they are capable of are 2 different things.

 

A v8 just feels a lot more powerful because of the powerband.

Posted

My buddy is a contractor and works out of his truck all day. Had the 4.3 and nothing but good things to say about it

Posted

My buddy is a contractor and works out of his truck all day. Had the 4.3 and nothing but good things to say about it

 

He's probably used to the old 4.8 and 5.3l small blocks and finds the new 4.3l pretty similar.

Posted

I'm hoping a tune will fix my 4.3 slug, I have driven other makes and models with V6's in them and I know GM could make them with a little more zip. I'm not talking about racing anyone or any of that nonsense, I'm simply talking about zipping out into traffic and such. I was given a 2017 Expedition as a rental while my truck was in the shop and that had the 3.5 in it and that thing had some zip. If Ford could do it, GM can. I think GM just has them programmed to optimize fuel mileage.

I know the new 4.3 is faster than the older V8's, as some punk kid was coaxing me to race him in his dualed out Tahoe as we ended up side by side at a couple red lights, I ended up blowing his doors off.

You do know the 3.5 in the expedition is their larger size turbo charged engine that costs a lot more than the 4.3, right?

Posted

You do know the 3.5 in the expedition is their larger size turbo charged engine that costs a lot more than the 4.3, right?

I get it, you like your 4.3. I think it's just ok.

Posted

I went with the 4.3 it was in a truck that basically had all the features me and the wife were looking for in a vehicle

Your post is still alive and well! What is your impression of the 4.3 after after three months of ownership?

  • Like 1
Posted

I get it, you like your 4.3. I think it's just ok.

I don't have a 4.3l, I'm on my second 5.3l.

 

I just jump into these threads because I had a 4.3l and for towing my ~3000lb fishing boat, and doing the outdoor sports related hauling I do, it worked great.

 

I paid less in insurance, less for gas, and think I paid less for the truck because demand is soft on 4.3s. (I think I paid around $30K for a LT2 Z71 4wd Xcab and the list was $42 or $43).

 

It drove and towed about the same as the 2010 5.3l I traded in on it. (and when I traded the 4.3 in they only knocked $1k off my negotiated trade in price off it when they pulled it up on the computer and found out is was a 4.3l)

 

The 4.3s are far under rated on truck forums. Just because this gen of trucks came out with more hp/torque doesn't mean the hp/torque most of us had for decades doesn't work any longer.

Posted

RCSB 4.3 RWD weighs about 4,521 lbs. 285 hp. = 15.8 lbs. per horsepower.

 

The 5.3 in the 2LZ 4WD Crew Cab Long Box at 5433 lbs. and you get a power to weight of 15.3 lbs. per horsepower.

 

Almost identical to the RCSB 4.3 RWD. In fact their power to weigh is much closer with full tanks as the CCLB carries another 10 gallons of fuel.

 

2LT 4.3L 4WD Crew Cab Long Box tips in around 5360 lbs. 285 hp. = 18.8 lbs. per horsepower. Adding 840 pounds to any ride will make it a slug.

 

We never ask the right questions when the things are debated. Why is that?

Posted (edited)

RCSB 4.3 RWD weighs about 4,521 lbs. 285 hp. = 15.8 lbs. per horsepower.

 

The 5.3 in the 2LZ 4WD Crew Cab Long Box at 5433 lbs. and you get a power to weight of 15.3 lbs. per horsepower.

 

Almost identical to the RCSB 4.3 RWD. In fact their power to weigh is much closer with full tanks as the CCLB carries another 10 gallons of fuel.

 

2LT 4.3L 4WD Crew Cab Long Box tips in around 5360 lbs. 285 hp. = 18.8 lbs. per horsepower. Adding 840 pounds to any ride will make it a slug.

 

We never ask the right questions when the things are debated. Why is that?

Interesting idea. This is one way to compare vehicles and has some merit. It doesn't work as a formula to define what makes a vehicle a slug but I don't doubt that a lighter regular cab will have more pep than a 4X4 crew. For fun I checked out this formula with a HD 4X4 crew Dmax and the weight is 19.1 lbs per horsepower!

2
Edited by Donstar
Posted

 

Interesting idea. This is one way to compare vehicles and has some merit. It doesn't work as a formula to define what makes a vehicle a slug but I don't doubt that a lighter regular cab will have more pep than a 4X4 crew. For fun I checked out this formula with a HD 4X4 crew Dmax and the weight is 19.1 lbs per horsepower!

2

 

 

Yep.

Gearing, aerodynamics, tires all play into the 0-60 and quarter mile equation as well.

 

There's another way to check if it's a "slug" as well:

 

http://www.caranddriver.com/reviews/2014-chevrolet-silverado-v-6-instrumented-test-review

 

 

 

This helped our V-6–powered Silverado turn a quarter-mile time of 15.7 seconds at 89 mph. That’s a tenth of a second faster than the 6.0-liter V-8 “VortecMAX” Silverado we tested back in 2007. But there is a catch: We had E85 in the tank this time.....Burning just gas, our quarter-mile time increased to 16 seconds flat at 87 mph. And no matter which fuel you put in the V-6, it’s still off the pace of the new and much ­ballyhooed LT1 V-8 that did 15.3 seconds at 92 mph.

 

So on E85 the 4.3 is 4/10 of a second slower than the 5.3 on regular gas, and 7/10 slower on regular gas in the quarter mile.

 

This is Car and Driver instrumented tests, I personally don't consider the differences between 15.3, 15.7, and 16 flat very significant.

 

For example, the mighty Honda Accord V6 makes it down that quarter mile in 14.2 seconds, over a second faster than the 5.3 Silverado.

 

http://www.motortrend.com/news/honda-accord-2017-car-of-the-year-contender/

 

Or a Subaru Forester with the good engine nails it in 15 seconds flat:

 

http://www.caranddriver.com/reviews/2016-subaru-forester-20xt-test-review

Posted

 

Interesting idea. This is one way to compare vehicles and has some merit. It doesn't work as a formula to define what makes a vehicle a slug but I don't doubt that a lighter regular cab will have more pep than a 4X4 crew. For fun I checked out this formula with a HD 4X4 crew Dmax and the weight is 19.1 lbs per horsepower!

2

 

 

Isn't my idea. Goes back about as long as power plants have been moving machines. Oh, and Brian, that LT1 isn't the motor in the current K2's. Just say'n.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   2 Members, 0 Anonymous, 198 Guests (See full list)


  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...