Jump to content

Recommended Posts

Posted (edited)

Well, Monday I left work, fired up the truck, and had no sounds from anything - radio, turn signals, bluetooth for incoming calls, nada.  3rd time this has happened in the last month.  A couple of restarts and still no joy.  The last 2 times this happened, the next day it was fine.  I know this has been an issue for some on here, so here's my story...

 

Since I'm getting near the end of my warranty period, I wanted to get this resolved.  Called the dealer I purchased it from, and they asked if I could bring it in now, the techs still have 15 minutes until they go home for the day.  Too far away to get there that soon, so since we moved since I purchased the truck, I call the dealer closest to our house and their service department is open until 8pm.  Cool, I can make that.  Service manager tells me to not shut it off, to pull straight into the building and they will scan it for error codes.

 

Sure enough, he pulls 4 codes from it.  Nothing flashing on the dash or anything like that, but he gives me a printout of the error codes, which I have attached.  They reloaded the software in the computer, takes about an hour, and on my way I go.  So far so good.

 

This post is really just in case anyone else has this issue, the codes they found when scanning my truck are attached.

Error Codes.JPG

Edited by OldBlue61
Add the error codes as tags
Posted
On 11/22/2017 at 10:19 PM, 05cyclone said:

I had this happen to me once. Let it sit overnight and it was back to normal when I restarted it.

 

Mine was too, the first 2 times it did it.  Since my warranty was winding down, I wanted to get it looked at.  Reloading the software in the radio (so far) seems to have done the trick.

  • Like 1
Posted

The are terrible about logic lock. The updated programming is supposed to repair this. If it happens again remove both the battery cables and hold them together for 30 seconds. This will discharge all the capacitors and repair the problem. Hope this helps.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Here's a starter kit:    CC Jensen, a Danish oil testing Concern gives us the following guidelines:   ISO 14/12/10 Very Clean Oil ISO 16/14/11 Clean Oil ISO 17/15/12 Lightly Contaminated ISO 19/17/14 New Oil ISO 22/20/17 Very Contaminated and not suitable for any service.   In addition CC Jensen gives a table showing how engine life is increased by cleaning up the oil. For example cleaning the oil from 19/17/14 to 13/11/8 will extend motor life by a factor of 6X.   But even cleaning it two “Life Extension Classes” will double motor life. So perhaps giving those classes would be useful:   21/19/16 20/18/15 19/17/14 18/16/13 17/15/12 16/14/11 15/13/10 14/12/9 13/11/8   *************************************   https://testoil.com/program-management/setting-iso-cleanliness-targets/   Third paragraph from the bottom will give a starting point.    Your next question should be, okay 10um at what Beta ratio and the answer is in the graph Beta 75.   Then the next question is what is your chosen filters profile? (Purolator PL series below) The red dot is Beta 75. This was the information I obtained from MANN a few years ago. So the best filters, Purolator One, AMSOIL EA, FRAM Ultra, Royal Purple, Bosch Premium should get a doubling engine life over filters like Purolator L, any service filter from any quick lube, WIX, NAPA, STP, Mobil 1, Purolator BOSS.    And as noted by CC Jensen a 2-5 micron @ Beta 200 bypass system has the capability of a six fold improvement. AMSOIL has such a system as does Donaldson.       Now having said all that testing is the touchstone. Test the oil NEW and test it with your chosen filter. Then test over milage. Do the work, get the result. But understand this in NOT absolute BECAUSE this is one factor in isolation.   Example:    A valve spring supplier can state that with cam X and a valve train of Y grams the valves will not float to 7K rpm. is that true if the builder choose a system 20 grams over limit? Common sense must be used and limits understood. 
    • This doesn't look like a GM truck. Not needed on a HD truck
    • It varies a ton around me. Some places are still at $5.00 or higher and others are way down into the $4's.   Offroad diesel was $4.02 at the one station I passed today.
    • So after reading the reveal from Chevrolet, I kept asking myself...why did the trim levels change?   Here are the official ones:   Work Truck (WT): The quintessential fleet truck, built with durable, easy-to-clean interiors for commercial or utilitarian use. Custom: A stylish, road-oriented trim that adds a more refined appearance, standard dual exhaust, and modern exterior styling. Custom Trail Boss: An entry-level off-roader featuring a 2-inch factory suspension lift and 34-inch mud-terrain tires on a budget. Silverado: Serving as the new base consumer truck (replacing the previous LT trim), it comes standard with the Z71 off-road package when equipped with 4WD. Trail Boss: Steps up the off-road hardware with the 2-inch lift, 34-inch tires, monotube shocks, an exclusive off-road hood, and more premium interior options. ZR2: The flagship off-roader. It boasts 35-inch mud-terrain tires, Multimatic DSSV dampers, front and rear electronic lockers, forged carbon-fiber interior accents, and an available hardcore Bison Edition (co-developed with AEV). High Country: The pinnacle of luxury. It replaces bright chrome with modern satin chrome, 22-inch wheels, premium leather, real wood interior trim, a panoramic sunroof, and an exclusive front-passenger touchscreen. As others have stated, why would you want a Silverado - 'Silverado' - wth?? LT needs to remain!!!   Also, there will no longer be a dedicated Z71 model.  All 4x4 trucks will have the Z71 package. Carplay is also something that cannot be removed.  Hopefully it will remain.     I am excited about the 5.7L V8 (350 C.I.D.)  Old school Chevy power.  My only concern is whatever version of AFM/DFM cylinder deactivation.  Too bad that isn't an option a buyer can choose to have or not.   I will definitely be stopping by my local dealership when these trucks start showing up.
    • I haven't seen diesel for less than $5.30 anywhere in my area
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...