Jump to content

No Interior Sound - Error Codes

OldBlue61
 Share

Recommended Posts

OldBlue61 Enthusiast

OldBlue61

Posted
Posted (edited)

Well, Monday I left work, fired up the truck, and had no sounds from anything - radio, turn signals, bluetooth for incoming calls, nada.  3rd time this has happened in the last month.  A couple of restarts and still no joy.  The last 2 times this happened, the next day it was fine.  I know this has been an issue for some on here, so here's my story...

 

Since I'm getting near the end of my warranty period, I wanted to get this resolved.  Called the dealer I purchased it from, and they asked if I could bring it in now, the techs still have 15 minutes until they go home for the day.  Too far away to get there that soon, so since we moved since I purchased the truck, I call the dealer closest to our house and their service department is open until 8pm.  Cool, I can make that.  Service manager tells me to not shut it off, to pull straight into the building and they will scan it for error codes.

 

Sure enough, he pulls 4 codes from it.  Nothing flashing on the dash or anything like that, but he gives me a printout of the error codes, which I have attached.  They reloaded the software in the computer, takes about an hour, and on my way I go.  So far so good.

 

This post is really just in case anyone else has this issue, the codes they found when scanning my truck are attached.

Error Codes.JPG

Edited by OldBlue61
Add the error codes as tags
OldBlue61 Enthusiast

OldBlue61

Posted
  • Author
Posted
On 11/22/2017 at 10:19 PM, 05cyclone said:

I had this happen to me once. Let it sit overnight and it was back to normal when I restarted it.

 

Mine was too, the first 2 times it did it.  Since my warranty was winding down, I wanted to get it looked at.  Reloading the software in the radio (so far) seems to have done the trick.

  • Like 1
carnau Enthusiast

carnau

Posted
Posted

The are terrible about logic lock. The updated programming is supposed to repair this. If it happens again remove both the battery cables and hold them together for 30 seconds. This will discharge all the capacitors and repair the problem. Hope this helps.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • JohnRoy
      2020 Sierra 2500 windows rolling down

      By JohnRoy · Posted

      Hey thanks yall for the info. It apparently was the key fob - the "reserve" key fob works just fine. Yall were all over it. Great input! JRD
    • PunchT37
      Wow I'm in a pickle. (Broke down truck) and a story.

      By PunchT37 · Posted

      I just bought one of these.   https://www.topdon.us/collections/diagnostic-tools/products/artidiag-pro   Yeah, it`s got a cable. $250/year after 2 years. Do I want more? Yep. But, I`m not working any more and can`t afford a whirlpool in my tool box.
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Why don't I have a good scanner? I've always wanted one when I've needed one.   My latest reading says I don't need to do a relearn on the ckp sensor on a 1995 with OBD 1.5. The relearn is prescribed for the later-model 1995's which shipped with actual OBD II when GM completed the transition in prep for the 1996 MY. I need to confirm that. Did you know forums are disappearing? Knuckleheads on Facebook... it's not the same. It's just not.   So, scanners. Again, shooting myself in the foot for having eBayed my Snap On MT2500 "brick" with all the adapters. Not that I couldn't buy another but those are getting quite old, and mine wasn't new enough to work on 2000's vehicles.   Damn it (as I'm scanning my email between paragraphs here). Did you know there's a 2000 Jimmy 2-door on BaT that's ending this morning? It's local. I want it. 14k miles. Absolutely beautiful.   Back to scanners. MT2500's are old. Solus, now that could be a contender. There's a ~2008 Verus with a system error that's basically new in box for cheap. Hmm...I'm not sure about a scanner that runs an archaic version of windows (95 or CE, I can't tell).   I want the ability to reset and rotate TPMS, test individual modules, bleed ABS, electronic parking brake controls for servicing brakes, relearn procedures and other bidirectional controls.   Snap On does an MT2600. It's a new model as of last year, marketed as their "entry" scanner. Entry? Only where $1900 gets you through the doorway plus, I'm guessing, $1000/year if you wish to keep it current. So goes scan tools actually designed for production environments. Want decent products with excellent support, you pay for it.   Everyone is raving about Autels and TopDons and Foxconns and all these newer brands that are selling the $500 "prosumer" scanners for backyard hacks like me. They're tempting...honestly. Updates are cheaper, base prices are remarkably cheaper... And you get to deal with bugs and translation whoopsies and, well, just don't use it on anything expensive, OK? Having a dealer replace an ECU because it needs to be re-imaged after an adventure in scanning is no joke. But I think most people are getting by OK with these units.   eBay on a scratch-and-sniff pro-model oldie, a shiny new TopDon, or???   God dang it, I can't stop looking at this Jimmy. I'm ready! I'll Bring The TRailer! It's beautiful.
    • Texasdeere
      What have you done to your K2 today?

      By Texasdeere · Posted

      I removed the OE running boards.  It looked so much better.  I wish I took them off a long time ago.     I had to put something back on for my wife.  I wanted Westin Sure Grip Running Boards but they are very pricey, like $600 plus.  I was going to go with the Ionic 41's like I had on the 2019 Silverado but went with Westin Outlaw Drop Steps instead, about $200 cheaper.  They are sturdy and functional but not super crazy about the look, but it works.  
    • Atlas
      Gas Prices

      By Atlas · Posted

      It's all a crock of 💩

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...