Jump to content

Adding Power Passenger Seat

Frostbite2600
 Share

Recommended Posts

SirenRed16 Senior Enthusiast

SirenRed16

Posted
Posted
Unplug your your passenger seat and inspect the body side connector. If you have the power and ground circuits, you should be ok.

This pic is for the driver side, but passenger side has the same power/ground locations.

4073dcd15b7b912f1ea27e6bc279d4f7.jpg


Sent from my iPhone using Tapatalk
Would we be able to add the power and ground circuits if they aren't present?

Sent from my SM-G955U using Tapatalk

  • Replies 33
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

pgamboa
pgamboa

To get power adjust seats, all you need to have is power and ground. Now with that said... LOL If you get seats that are Heated/Cooled, most likely, the driver seat will have a Seat Memory Module un

Dusty Evans
Dusty Evans

Thanks. Just ordered. Can’t wait to get this finished. I can’t stand having one cloth seat  In my truck lol

wforrest08
wforrest08

It’s been done but it’s a lot of work this might be a better solution in your case and a lot cheaper as well.   https://www.ebay.com/itm/Passengers-Seat-Lift-Kit-2018-Silverado-GMC-Sierra-Tr

  • 3 weeks later...
Szubi Enthusiast

Szubi

Posted
Posted

Ok so I have the regular power drivers seat on my 18 Silverado 1500 but I have a new passenger seat track from my 2017 Silverado ltz, would I be able to use that track with a set of switches on 2018 passenger seat if I have the power and ground ? Will it work ?

Sent from my SM-N950U1 using Tapatalk

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Ok so I have the regular power drivers seat on my 18 Silverado 1500 but I have a new passenger seat track from my 2017 Silverado ltz, would I be able to use that track with a set of switches on 2018 passenger seat if I have the power and ground ? Will it work ?

Sent from my SM-N950U1 using Tapatalk



You have the entire seat itself or just the track?

If you inspect the connector that your seat plugs into and see if you have the power and ground connections.

This is the driver side, but the passenger side has the same power and ground positions.

7f5cb20c80e2df11e0e51c01d5b75d35.jpg


Sent from my iPhone using Tapatalk
Szubi Enthusiast

Szubi

Posted
Posted

I will attempt and let you know

Sent from my SM-N950U1 using Tapatalk

  • 10 months later...
Dusty Evans New Member

Dusty Evans

Posted
Posted
On 12/5/2018 at 9:41 PM, pgamboa said:


Don’t lose hope...

For the airbag light, I think this might be related to the release years. I think with 2016+ seats, you won’t need to worry about the seat position sensor.

Easiest method is to try to source seats that did not come from a seat memory truck.

If you find a deal on memory seats, still not the end of the world. You’ll just need memory bypass harness from me.

I just wanted to state full disclosure to understand all the gotchas with this.


Sent from my iPhone using Tapatalk

I bought seats out of a 2017 ltz (or That was what I was told Anyway) To put in my 2014 lt. passenger seat was manual and new one is automatic. Seat functions all work but airbag light is one and is saying seat position sensor. I need your harness for this and driver seat doesn’t work at all I assume it’s related to the seat memory module. Is it $150 for both or just the driver seat harness fix?

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
I bought seats out of a 2017 ltz (or That was what I was told Anyway) To put in my 2014 lt. passenger seat was manual and new one is automatic. Seat functions all work but airbag light is one and is saying seat position sensor. I need your harness for this and driver seat doesn’t work at all I assume it’s related to the seat memory module. Is it $150 for both or just the driver seat harness fix?

Please note the closure notice on the site. You can place your order online and we will build/ship all products in the order they were placed when we resume normal operations.

You need one of each. You’ll need to remove the seat position sensor from your factory passenger seat over to the new passenger seat.

https://harnessdr.com/product/2014-2019-silverado-sierra-seat-memory-bypass-harness/


https://harnessdr.com/product/2014-2019-silverado-sierra-seat-position-sensor-harness/


Sent from my iPhone using Tapatalk
  • Thanks 1
John Fleming Enthusiast

John Fleming

Posted
Posted

@pgamboa so if I understand this correct. so long as i have the power and ground circuits pictured on the passenger side, can find a power non-memory passenger seat this is a plug and play swap?

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
[mention=159655]pgamboa[/mention] so if I understand this correct. so long as i have the power and ground circuits pictured on the passenger side, can find a power non-memory passenger seat this is a plug and play swap?

Yes. There is no passenger seat memory... just driver side.


Sent from my iPhone using Tapatalk
  • 2 weeks later...
  • 2 months later...
Fonz New Member

Fonz

Posted
Posted

I have a 2018 Silverado with cloth seats ,was wondering if I can buy track seat for my passenger side to raise up and down so my daughter can see better ,of course it’s lifted 

  • 2 weeks later...
Wade Wilson New Member

Wade Wilson

Posted
Posted

What is the easiest way to add a passenger side power seat to a 2017 Silverado 2500HD. The driver is power with no memory. I have not dug into the wiring yet. Like someone else was saying can I just use the power seat track from (what  year) and put on my truck? The truck has 14,000 miles and seats are great. Problem is short wife doesn't like staring at the dash or hood. Can't raise seat because 6' son wouldn't be happy. (Please note changing out wife is not an option.)

  • 2 months later...
Matt Castro Enthusiast

Matt Castro

Posted
Posted

What if I can’t find a seat position sensor to plug in on my stock seat or on the new leather powered seat

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...