Jump to content

TPMS 2019 vs 2014 compatibility

Kleeve

By Kleeve
in Troubleshooting & Recalls

 Share

Recommended Posts

Kleeve Enthusiast

Kleeve

Posted
Posted

 

Just purchased a set of 2019 Silverado take off wheels and tires for my 2014 truck   - Thought I could simply take off the old wheels & tires and bolt on the new ones.  Somewhere deep in the fine print of my purchase it says that the frequency for the tpms was changed in 2019.  Anybody know if that is true?  I don't want to take off the old wheels and tires, only to find out I'll have to un-mount both sets to put in my 2014 tpms on the 2019 wheels

 

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
Posted

From what I've seen and heard, the 19 sensors will not work on 18 and prior and the other way around. That goes for the 2500's also.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Thanks - looks like I'm going to the tire shop for some work 

SS502 Senior Enthusiast

SS502

Posted
Posted
31 minutes ago, Kleeve said:

Thanks - looks like I'm going to the tire shop for some work 

Yeah according to that thread his local Discount Tires couldn’t do it for him...might have to do the dealership thing or at least call whoever before a visit.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

  • 9 months later...
Libtech29 Enthusiast

Libtech29

Posted
Posted
On 12/19/2018 at 11:02 AM, Kleeve said:

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

Digging up this old thread cuz I'm dealing with a similar issue. I'm trying to put some 2018 wheels on my 2019 and I was quoted 400 bucks in labor to complete the sensor swap. Seemed a little high to me. Was yours in that same range?

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

You need to find another shop - My bill was $85.00  - This was at a regional tire shop  in Michigan called Mr Tire - I would try to find a shop that only deals with tires & related labor. 

 

  • 4 years later...
Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

ksiesel Enthusiast

ksiesel

Posted
Posted
1 hour ago, Skeeter McSkeet said:

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted (edited)
29 minutes ago, ksiesel said:

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

Edited by Skeeter McSkeet
ksiesel Enthusiast

ksiesel

Posted
Posted
12 hours ago, Skeeter McSkeet said:

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted
8 hours ago, ksiesel said:

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

newdude Senior Enthusiast

newdude

Posted
Posted
3 hours ago, Skeeter McSkeet said:

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

 

 

You need 315mHz sensors.  New wheels so 2019 T1 and up are 433mHz and won't talk to a 14-19 old truck.  

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.19 @ Kroger’s in Montgomery Tx
    • Flynlow
      2027 Chevrolet Silverado: Official Discussion

      By Flynlow · Posted

      We have now!  2027 GMC Sierra  Early look, but I'm a GMC guy and so far I think I like the looks of the Chevy better.
    • newdude
      Lower trims ( WT, Custom, Silverado ( aka LT )

      By newdude · Posted

      HD at the moment, are kinda their own deal.  How LTZ sells on those vs on 1500, there is a difference.   They are merging most of the mid trims on 1500.  LT, RST and LTZ are replaced by one trim, Silverado.  LT and RST are a BIG portion of sales.    Bad naming choice aside, the new Silverado trim will offer the spread of options that those three trims offered.  So expect to see things like the tech package for example, and memory seats.  And LT Trail Boss will now just be "Trail Boss" (formerly LT Trail Boss) but will offer content spread like the new Silverado trim will.  The press photos showed the Trail Boss (formerly LT Trail Boss) has access to Super Cruise now, which on the current truck was High Country only.       Here is the Trail Boss interior.  Memory seats and Super Cruise are present.  All things the LT Trail Boss it replaces, and the RST it was based on didn't get on the current gen.  You had to go to LTZ or ZR2 for memory seats, and High Country for Super Cruise.      
    • dennismc
      2021 vs 2026 handling (1500 X31 Sierra)

      By dennismc · Posted

      I installed a Hellwig rear sway bar on my 21 Sierra SLT, it made a huge difference on how the truck handles, no body roll, the trucks much more planted now. Not sure of the suspension differences between the 21 and 26,  if its body roll your having a sway bar will solve it. 
    • Old Bay
      frustrating P0446 code

      By Old Bay · Posted

      So a follow up and my fix. I found in online searches the live data to look at on a scan tool to verify the fuel tank pressure sensor was working.  It showed an spec number towards the lower end of the rang, but in spec.  Then while it was running opened the gas cap and the pressure should change.  It didn't change even a tiny bit.  The data for the purge valve said it was open...never changed. So then I measured the voltages on the plug for the fuel pressure sensor and they matched what it should be.  So local car quest parts had the sensor in stock...it was a bit of a pain to remove and an even bigger one to get it to actually go back in.  It helped to unbolt the driveshaft and bungie cord away from the gas tank to give a bit more room to work. So fuel tank pressure sensor in I cleared the code, and started it up.  I went to the scan tool's live data and... Eureka! The pressure number was different and fluctuated a bit.  So took it on a short drive and pressure number varied saw the purge valve go from closed to open and back to closed.  Drove it to and from work for roughly a week plugged in the scan tool no codes.  I took it in to get tested and passed.  In my state's infinite wisdom (oops meant greed), since I pushed the test with the maximum extensions I have to take it back in by Feb '27 to 'get it back up to date', then my next test won't be until Feb '29. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...