Jump to content

TPMS 2019 vs 2014 compatibility

Kleeve

By Kleeve
in Troubleshooting & Recalls

 Share

Recommended Posts

Kleeve Enthusiast

Kleeve

Posted
Posted

 

Just purchased a set of 2019 Silverado take off wheels and tires for my 2014 truck   - Thought I could simply take off the old wheels & tires and bolt on the new ones.  Somewhere deep in the fine print of my purchase it says that the frequency for the tpms was changed in 2019.  Anybody know if that is true?  I don't want to take off the old wheels and tires, only to find out I'll have to un-mount both sets to put in my 2014 tpms on the 2019 wheels

 

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
Posted

From what I've seen and heard, the 19 sensors will not work on 18 and prior and the other way around. That goes for the 2500's also.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Thanks - looks like I'm going to the tire shop for some work 

SS502 Senior Enthusiast

SS502

Posted
Posted
31 minutes ago, Kleeve said:

Thanks - looks like I'm going to the tire shop for some work 

Yeah according to that thread his local Discount Tires couldn’t do it for him...might have to do the dealership thing or at least call whoever before a visit.

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

  • 9 months later...
Libtech29 Enthusiast

Libtech29

Posted
Posted
On 12/19/2018 at 11:02 AM, Kleeve said:

Local shop had me in and out in about an hour - added my existing sensors to the new wheels/tires - working great 

They knew about the frequency issue & had no problems getting things working

Anybody need some 433MHZ  sensors for a 2019 truck - no stems - Like new - less than 100 miles 

Tire rack is selling them for $50.00 each - make me an offer - Free shipping 

Digging up this old thread cuz I'm dealing with a similar issue. I'm trying to put some 2018 wheels on my 2019 and I was quoted 400 bucks in labor to complete the sensor swap. Seemed a little high to me. Was yours in that same range?

Kleeve Enthusiast

Kleeve

Posted
  • Author
Posted

You need to find another shop - My bill was $85.00  - This was at a regional tire shop  in Michigan called Mr Tire - I would try to find a shop that only deals with tires & related labor. 

 

  • 4 years later...
Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

ksiesel Enthusiast

ksiesel

Posted
Posted
1 hour ago, Skeeter McSkeet said:

CPR Time, bringing this to life again.

 

Put some 2022 AT4 takeoffs on my 2015.  My DIC shows the pressure for each tire, I figured it would not.  Only problem is the numbers are all off.  Using a pressure gauge they all show 35-36, but the DIC shows 30-31 for them all.  I tried a hand gauge and also went to a gas station and used theirs off the air pump, both were reading 35-36 psi.  

 

What do I need to do? I will also add I swapped these in my garage and only have driven maybe 5 miles on them.  

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted (edited)
29 minutes ago, ksiesel said:

Just a guess, but are you old tires still nearby your truck when you are at home?  I suspect your truck may still be learned to the old sensors in the wheels no longer on the truck.  Add to that you haven’t driven far enough yet for the TPMS faults to set for not being able to read the sensor (because it’s still at home and no longer in range).

 

I’ve never heard of a 433 MHz sensor pairing and sending ANY data to a 315 MHz system like your K2xx truck is.

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

Edited by Skeeter McSkeet
ksiesel Enthusiast

ksiesel

Posted
Posted
12 hours ago, Skeeter McSkeet said:

Yea my old tires are in my garage that my truck is in! I figured it wasn’t them as their pressure was around 34-35 when I pulled them off. You think that number would change once the weight of the truck was no longer on them unmourned? Seems kinda to make sense.  
 

I’m still guessing I’ll need new sensors put in them if that’s the case since the frequencies should be different in the 2022s.

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted
8 hours ago, ksiesel said:

 

The pressure will not change with or without the weight of the vehicle on the tire.  It will change pretty significantly with temperature though.

 

If you never did a sensor relearn procedure on the truck after replacing tires, you can be sure it is still looking for the sensors in the old wheels.  Each sensor has a unique transmitter number and this is what the TPMS module in the truck is looking for.  The relearn simply changes this association.  You can think of it just like a paired Bluetooth connection.

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

newdude Senior Enthusiast

newdude

Posted
Posted
3 hours ago, Skeeter McSkeet said:

Ok took a 100 mile trip today and they weren’t recognized after about 25 miles. Will our trucks relearn the new version sensors in them? Saw some replacements you can screw in from the outside it looked like, made to swap winter/summer wheels. No idea on them. 

 

 

You need 315mHz sensors.  New wheels so 2019 T1 and up are 433mHz and won't talk to a 14-19 old truck.  

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,962
    Total Members
    8,960
    Most Online
    contrabombarde
    Newest Member
    contrabombarde
    Joined

  • Who's Online   0 Members, 0 Anonymous, 829 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all the help so far!   I did try right from 2026 right down to 2021, and only from 2023 down lets me select the option for tire psi change, but I get the vehicle not supported error!   I'll definitely try it under Chevrolet after work today, and I'll get the sensor number from gm for my truck tire sensors. And I'll let you know if it works for me under Chevrolet!   And if that doesn't work, I'm going to guess that what @Atlas said about maybe I have a different body control module could be true!  
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      From where I'm sitting this sounds like a compatibility problem. I'm assuming the 2007 was a 900-series truck, and not an 800-series (they were sold side-by-side in dealerships that model year), since it starts and runs.   This is why I HATE post-2006 vehicles. Everything becomes a huge problem when you try to keep the thing running for longer than the manufacturer has designed it to.    I can't remember when Global-A architecture started - either '10 or '11. For your sake, you had better hope it's '11, or you're going to be spending some BIG money to correct this cluster-eff. That's something you need to find out before doing anything else. You may have several computers bricked ... but the fact that it runs tells me you MIGHT be ok here.     EDIT: Just did a quick refresher. You're screwed. This is Global-A. The 2 systems are NOT compatible in the slightest. Once you get the correct engine in there that IS compatible, you're going to need to see how many computers are locked. Absolute NIGHTMARE to straighten out, too. Your buddy might be better off cutting his losses and finding something else.   Welcome to post-2006 vehicle electronics. This is why I quit the industry, and drive nothing built after 1994. This stuff takes all the fun out of wrenching!  
    • bwiese
      Show Us Your 2019 & Up T1 Pictures !

      By bwiese · Posted

      Recently acquired new 2026 Silv. 1500 WT  - L3B + 4WD,  std cab + std bed, in (duh!) Sierra White. Upgrades: replaced 'steelies' w/  Vision "Flow" black alloys,  17x8.5"; HDX nerf bar w/steps (black powdercoat); Weatherguard large/deep alloy saddle toolbox; Michelin fitted bedmat (sale, perfect fit) Weathertech door sill guards TBD: rear wheebox liners 4x black fender arch trim - searching for best  (Putco: chrome only; not looking for flares either!) -Bill    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      True, hard to say what differences there may or may not be between Chev and GM as well as a production year or mid year part change either.    I just found it odd that under the Sierra choice on the Autel that many of the last few years of production year did not include the choice of changing the tire pressure but if that is an Autel thing or a GM thing as to why the choices were not there. Knowing what tpms sensors are on the truck should give some guidance into which choices on the tool even make sense to try as I wouldn't give up just yet with the tool but I guess he will see what if anything he comes up with if he finds out a bit more info and tries a few more things on the Autel. 
    • davester
      Needing this part.

      By davester · Posted

      I'm sure if you went to a junkyard where you go in and pull the part off the truck yourself, not a used part place where they do it for you, you can get that part on it's own.  Depending on if and what else you would be buying, and time of day, they might even just skip over adding it as a item to the bill.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...