Jump to content

The "Catch Can" Explained - By Elite Engineering

Elite Engineering

Recommended Posts

BabyHuey2015 Enthusiast

BabyHuey2015

Posted
Posted

Hello everyone, I've been reading up on these CC and I'm wondering if I need one for my application. I have a 2015 5.3 that I put an Edelbrock Eforce supercharger on. Would I still want to use or need a CC?

 

What other manufacturers besides Elite make a good CC? I know I carry no credability here and not looking to start any wars or bashing. Elite seems to be the one of choice and appears to have good customer service, but that's not the case for me. I've called 3 times, left 2 messages and emailed both addresses. Only to get a single email saying "I'll look into it and get back to you". That was 3 weeks ago. So I'm good on passing them up. Again...I'm not slamming, bashing or whatever. I'm just trying to get some answers and take care of my pickup.

 

Thank you in advance for your advice.

  • Replies 698
  • Created
  • Last Reply
Elite Engineering Enthusiast

Elite Engineering

Posted
  • Author
Posted

Hello everyone, I've been reading up on these CC and I'm wondering if I need one for my application. I have a 2015 5.3 that I put an Edelbrock Eforce supercharger on. Would I still want to use or need a CC?

 

What other manufacturers besides Elite make a good CC? I know I carry no credability here and not looking to start any wars or bashing. Elite seems to be the one of choice and appears to have good customer service, but that's not the case for me. I've called 3 times, left 2 messages and emailed both addresses. Only to get a single email saying "I'll look into it and get back to you". That was 3 weeks ago. So I'm good on passing them up. Again...I'm not slamming, bashing or whatever. I'm just trying to get some answers and take care of my pickup.

 

Thank you in advance for your advice.

 

I'm really sorry to hear about the trouble. That shouldn't be a problem. Shoot us an email, and we'll get in touch with you.

 

We can always be reached at:

 

[email protected]

BIG THUNDER II Enthusiast

BIG THUNDER II

Posted
Posted

Hello everyone, I've been reading up on these CC and I'm wondering if I need one for my application. I have a 2015 5.3 that I put an Edelbrock Eforce supercharger on. Would I still want to use or need a CC?

 

What other manufacturers besides Elite make a good CC? I know I carry no credability here and not looking to start any wars or bashing. Elite seems to be the one of choice and appears to have good customer service, but that's not the case for me. I've called 3 times, left 2 messages and emailed both addresses. Only to get a single email saying "I'll look into it and get back to you". That was 3 weeks ago. So I'm good on passing them up. Again...I'm not slamming, bashing or whatever. I'm just trying to get some answers and take care of my pickup.

 

Thank you in advance for your advice.

 

I'm partial to the Moroso CC. See my Topic

Moroso Air-Oil Separator (Catch Can) Install
Silverado-Hareek Senior Enthusiast

Silverado-Hareek

Posted
Posted

Anybody care to comment on wether or not I need one with the supercharger?

 

You do need one but I'm not sure exactly which style....likely the dual outlet can but check with customer service. Either the Elite Engineering E2X or the RX Catch Cans are my recommendations. They're essentially the same can and the best on the market based on user feedback.

 

http://teamrxp.com/

 

http://www.eliteengineeringusa.com/e2-x-catch-cans/

Silverado-Hareek Senior Enthusiast

Silverado-Hareek

Posted
Posted

They absolutely sound like the best on here. I'm just not interested them after the customer service issues I've had. Must just be my luck.

 

I have not dealt with Elite Engineering so I can't comment on them, but I've had great customer service experience with RX. If you email them with your engine and vehicle specifications, they will tell you exactly what you need. Others around here seem to have had good luck with Elite though and recommend their products.

BabyHuey2015 Enthusiast

BabyHuey2015

Posted
Posted

 

I have not dealt with Elite Engineering so I can't comment on them, but I've had great customer service experience with RX. If you email them with your engine and vehicle specifications, they will tell you exactly what you need. Others around here seem to have had good luck with Elite though and recommend their products.

For whatever reason I thought they were the same company and those were 2 different models of cans. Thank you very much, I will try them.

Cowpie Senior Enthusiast

Cowpie

Posted
Posted

I have the Elite E2 can. I just used one outlet, but that was all I needed. Works great. I never had any issues, so can't speak about poor customer service. I got what I ordered, and in a timely manner. I did ask some questions before ordering to confirm the proper bracket I needed and got quick response. I would highly recommend them. I have no experience with RX, so can't diss them or praise them. I am sure they are a fine outfit as well.

Elite Engineering Enthusiast

Elite Engineering

Posted
  • Author
Posted

Anybody care to comment on wether or not I need one with the supercharger?

 

We would like another opportunity to earn your business. But would need to know a little more to be real specific, but all forced induction engines need a proper crankcase evacuation and oil separation system for engine longevity and proper ring seal and stability.

Amuro Enthusiast

Amuro

Posted
Posted

100% normal. My "basic" Elite CC hisses. I have to "TRY" to hear it at idle with the hood down. It is noticeable with the hood up with the truck running though..................but how often does that happen???

 

It's catching the oily vapors that would/could potentially cause deposits on the intake valves!!

After running with it for a while it's just the vaccume/ hose causing the sounds which is normal. The catch can works perfect and even with less then a thousand mile give or take I see the results. I'm happy with it and it works.
  • 2 weeks later...
Nwatson99 Enthusiast

Nwatson99

Posted
Posted

Has anyone installed the catch can with factory warranty left on their truck, then took their vehicle in for service with it installed and the service dept noticed the catch can installed?

If so did GM or Chevy service depts. try to state the factory warranty is now void or what was the comments made?

Elite Engineering Enthusiast

Elite Engineering

Posted
  • Author
Posted

Has anyone installed the catch can with factory warranty left on their truck, then took their vehicle in for service with it installed and the service dept noticed the catch can installed?

If so did GM or Chevy service depts. try to state the factory warranty is now void or what was the comments made?

 

 

Good question. I can tell you we have had Catch Cans on all our company trucks for the past 15+ years. And every year each one has gone into our GM dealership for some type of warranty work, and not once did a dealer question the Catch Can. If you have a good dealer with good mechanics, they understand the benefits of a good catch can.

mookdoc6 Senior Enthusiast

mookdoc6

Posted
Posted

Mine does not care either about a catch can.....Probably don't care about a tune either. It's obvious if vehicle is taking care of or not usually.........

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,863
    Total Members
    8,960
    Most Online
    Bulldogger
    Newest Member
    Bulldogger
    Joined

  • Who's Online   5 Members, 0 Anonymous, 794 Guests (See full list)

  • Latest Articles

  • Posts

    • TrueBlue
      Transmission Temperature Hitting 220s

      By TrueBlue · Posted

      Thanks, so being a different beast altogether, anyone know what the "optimal" temp is for the 10L80/90 for proper shifting?
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      How many years have I pointed out every point in that link to the folks here and been avalanched with criticisms and outright hostilities at times? I ran counter to even the great CUSTOMBOSS and Lake Speed Jr and the half dozen experts on YouTube and in the final.....GM, Physics (Stribeck) backs that Grumpy old Bear.    Honestly, I never said a thing engineering hadn't studied silly and laid in concrete during WWII. But I'm old, the information is old and yet, the Laws of Physics are eternal.    Okay there is one exception. I vehemently disagree with their use of the word 'tolerances' when what it meant is "clearance".   The clearance is the distance between two objects. The tolerance is the degree of acceptable variation permitted in that clearance. I.E., piston to bore clearance is 0.004" with a tolerance of +/- .0002" so the clearance is in specification if it lies between 0.0038" and 0.0042". Cutting that 'tolerance in half has ZERO impact on lubrication requirements. Makes for more difficulty in manufacturing.  But a tighter clearance 'MAY'. Depends on finish. Anyway....   It's one of those statements made by people to make themselves look smarter than they are to convince people who are as un-enlighten as they seem to manipulate their behaviors. But hey, the blind leading the blind puts them both in the pit. 
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Out and about yesterday on a long Saturday drive I passed a lot of Shell stations. My preferred, so I pay attention. Lot's of small town Illinois so not six stations in three blocks like the city.    Everyone of them over a radius of say 100 miles had regular at $4.19 but one which was the one closest to home at $4.15. However Premium pricing varied greatly between 85 cents over regular to $1.50 over. I'm not counting the price of the station with the lowest regular so the reference is the same for the remainder and all within the same brand. However the spread discrepancy holds across all brands.     @txab, any thoughts on that? 
    • revrnd
      Future GMC Jimmy

      By revrnd · Posted

      What are your thoughts? The Chevy Blazer relaunch was an epic case of 'lunchbag letdown'. Jeep Wranglers and Ford Broncos stick out like a sore thumb.    The AI photos do not look like a 'retro version', but shrunken Tahoes. Get away from the 'futuristic look'. I've seen two concepts. One had rectangular headlight like a Rivian and the other way too big headlights (similar to a previous non-Wrangler SUV) should include dual round headlights like the early version.   If not this would look OK   At least it has GM styling (albeit the K2XX) A lot of the images floating around look like Bronco IIs or the current Bronco. Looking at the Broncos in my area (central Ontario, it seems to be a mix of 2 doors and 4 doors, 'mall rated' to ones that could go offroad.    I'm sure a AT4 and AT4X RPOs could be outfitted similar to a Rubicon if the braintrust understood the whole offroad scene. Crossing my fingers that if it does see the light that the front air dam/bumper doesn't extend below the center line of the tire...      
    • revrnd
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By revrnd · Posted

      I saw this news earlier this year:   https://theautowire.com/2026/06/12/gm-kills-off-chevys-biggest-silverado-trucks-as-sales-collapse-and-factory-fallout-spreads/

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...