Noise When Backing

[Jaychevy81]

Not sure if it’s the same noise mine clunks when backing over the apron or on right hand turns. Almost sounds like a older Chevy when you would push it side to side and hear the Ka clunk. I tried greasing the springs but still does it.


Sent from my iPhone using Tapatalk

[Zip2014]

Not sure if it’s the same noise mine clunks when backing over the apron or on right hand turns. Almost sounds like a older Chevy when you would push it side to side and hear the Ka clunk. I tried greasing the springs but still does it.


Sent from my iPhone using Tapatalk

No just straight back up.


Sent from my iPhone using Tapatalk

[Jimchevy18]

On 5/23/2019 at 2:56 PM, kickass audio said:

I think he means the little metal cap that GM puts over the CV nut on the front wheels. That shouldn't be loose since they are super tight from the factory with how they fit in there.

 

I would play with the parking brake maybe and see if it helps any. Does it do it regardless if it was cold or warm out? How about if it is humid or it just rained the night before? Maybe you have a little surface rust on the rotor but it is making noise when you first start to move. There should be no way your brake dust shields are rusting and making it come into contact with the rotors at your age so I would rule that one out.

 

Something I would check is that all of your brake bolts are nice and tight and that the pads are able to move freely. I would also suggest trying to gently ride your brakes when you back up instead of letting go of the brake. See if it makes any difference when the brakes are applied a little or not.

i have a 18 Silverado that makes clicking noise when backing up and turning the wheel to the right ,my foot I slightly on the brake. I took it to Dealer 2 times and they haven’t been able to locate the noise.they put on a new castle nut on the wheel bearing because that was there fix but it wasn’t it.