TrailBoss 2019 jumpseat and console swap

FLTrailBoss · August 6, 2019

I'm looking to swap out my jumpseat in my 2019 TrailBoss ,custom. It is useless and I am in dire need of that additional storage area. Any ideas?

Thanks for your time.

KEEPER OF SECRETS · August 12, 2019

Here's the thread that gives all the info for replacing the non storage jump seat arm rest top, to the one with storage.

Skipping ahead to page 7, Jeffed's post on June 13th, you'll see the part number for the armrest. (Top seat portion) 84647286

Then on the next page, you will find the clip part number, which you need 5 each of. 11549266

Big time thanks to Jeffed for posting his results, along with the PDF document he posted on June 13th as well.

IMO, this is quiet possibly the most epic "must do" mod on Custom and Trailboss Custom's, short of the exhaust mods.

Pic that I attached is from that thread.

Hope this helps.

-Patrick-

TrailBossST · August 13, 2019

I'm still looking for the locking seat part number, if anyone has it.... already did the arm rest/seat back swap per Jeffed.

Hardison0223 · August 15, 2019

Here is a link for the jump seat upper portion as well. A little cheaper than gmparts online.

https://sdparts.com/i-24134630-genuine-gm-parts-84602302-center-console-upgrade-for-2019-silverado-work-truck-models.html?gclid=Cj0KCQjw-b7qBRDPARIsADVbUbXk1LxhFfFm77TnW7b8wKCNj3oZDHoXTGKiAvtTaRSBq7aFXU1szewaApU0EALw_wcB

UncleDave · August 19, 2019

On 8/12/2019 at 7:08 PM, KEEPER OF SECRETS said:

Skipping ahead to page 7, Jeffed's post on June 13th, you'll see the part number for the armrest. (Top seat portion) 84647286

Then on the next page, you will find the clip part number, which you need 5 each of. 11549266

On 8/14/2019 at 10:06 PM, Hardison0223 said:

Here is a link for the jump seat upper portion as well. A little cheaper than gmparts online.

https://sdparts.com/i-24134630-genuine-gm-parts-84602302-center-console-upgrade-for-2019-silverado-work-truck-models.html?gclid=Cj0KCQjw-b7qBRDPARIsADVbUbXk1LxhFfFm77TnW7b8wKCNj3oZDHoXTGKiAvtTaRSBq7aFXU1szewaApU0EALw_wcB

What's the difference between part numbers 84647286 and 84602302? They look the same.

Also, is there a part number for the lower seat bottom with the locking storage?

JThizz · January 23, 2020

On 8/19/2019 at 5:39 AM, UncleDave said:

What's the difference between part numbers 84647286 and 84602302? They look the same.

Also, is there a part number for the lower seat bottom with the locking storage?

I have tried looking for the lower seat with the locking storage but man it’s almost impossible to find let me know if you find something Please

nolte · January 28, 2020

.

Edited January 30, 2020 by nolte

Evansdmax · May 9, 2020

Could I use a center console from a 2014-18 model?

William Gradin · May 22, 2020

Anybody know if this will work for 2020 Sierra 2500?

a57chevyguy · July 16, 2020

I did a power seat and console transform into a 2019 custom trail boss from a 2020 rst.

Edited July 16, 2020 by a57chevyguy

Jason k · July 19, 2020

If you don't mind me asking how did you wire the power seat? I've been desperately trying to figure it out

19CustomLtTrlBoss · August 4, 2020

Hey all, I just installed my new console in my 2019 custom TB, it was out of a 2019 GMC 1500 Denali. I was able to get one from G & R Auto parts out of Oklahoma City. It took 30 mins for the full swap, the pain part is you have to remove both driver and passenger seats to get the back bolts out of the jump seat. There is no wiring harness yet or updated module but the guy who I talked to from harness doctor said earliest is late this year. It's a whole different pin connector, intergrade wireless charger, SD, 4 USBs. I'm nixing the rear heated seats. All I need is the new trim to match my gunmetal that came with the truck. Any ideas? I was thinking painting or wrapping for the temp the dealer wanted way to much.

19CustomLtTrlBoss · August 4, 2020

On 5/9/2020 at 12:08 PM, Evansdmax said:

Could I use a center console from a 2014-18 model?

No I tried it. It won't match up with out heavy modification. It's 6inchs to long. And the rear vents don't have the cutouts or plumbing.

19CustomLtTrlBoss · August 4, 2020

5 minutes ago, 19CustomLtTrlBoss said:

Hey all, I just installed my new console in my 2019 custom TB, it was out of a 2019 GMC 1500 Denali. I was able to get one from G & R Auto parts out of Oklahoma City. It took 30 mins for the full swap, the pain part is you have to remove both driver and passenger seats to get the back bolts out of the jump seat. There is no wiring harness yet or updated module but the guy who I talked to from harness doctor said earliest is late this year. It's a whole different pin connector, intergrade wireless charger, SD, 4 USBs. I'm nixing the rear heated seats. All I need is the new trim to match my gunmetal that came with the truck. Any ideas? I was thinking painting or wrapping for the temp the dealer wanted way to much.

Adding parts brake down list for reference