Jump to content

Multi Pro Tailgate Removal

hkyfsh
 Share

Recommended Posts

Morgan Swisher Enthusiast

Morgan Swisher

Posted
Posted
On 2/18/2020 at 8:54 AM, hkyfsh said:

Just an FYI.  I ordered this camera.  I talked to their customer service and they said this will complete the circuit on the surround vision system without having to take the camera out of the tailgate.  

 

https://camera-source.com/automotive-cams/gm-oe-fit/2019-gm-1500-w-360-view-relocation-kit-with-camera-included.html

 

Morgan Swisher Enthusiast

Morgan Swisher

Posted
Posted

Did you get this camera? And if so, did it work as said? Can you give your description of it and evaluation?

 

Thanks, Morgan

hkyfsh Enthusiast

hkyfsh

Posted
  • Author
Posted

I did. It's basically the exact same camera that's in the tailgate, wiring and all. It comes with an enclosure that you can mount anywhere. I have it on my camper. 100% recommend. Very easy install and works perfectly. 

Morgan Swisher Enthusiast

Morgan Swisher

Posted
Posted

Does it plug into the disconnect that was under the truck or can it also plug into the dual plugs that are in the bed near the tailgate? It's hard to see in the picture.

Thanks

hkyfsh Enthusiast

hkyfsh

Posted
  • Author
Posted

It plugs into the disconnected tailgate camera port. No way for it to plug into the ports on the bumper. 

Morgan Swisher Enthusiast

Morgan Swisher

Posted
Posted

Well, I heard from Chevy. They sent it to their engineers. They said it was designed that way. Time to get new engineers. There was no recourse. They don't understand how may people need to remove the tailgate as they were too busy celebrating all the new cameras they designed. Pretty sad. Didn't even say they would look into it. Maybe when they start losing sales and getting more complaints?

  • 4 weeks later...
Gerry Ireland New Member

Gerry Ireland

Posted
Posted
On 2/4/2020 at 9:40 AM, Morgan Swisher said:

I have the Silverado, not the MultiPro but having trouble with other cameras not working after unplugging

I unplugged mine  no dummy plugs to protect wiring harness and no cameras were working

JRS2018 New Member

JRS2018

Posted
Posted
On 2/26/2020 at 4:10 PM, Morgan Swisher said:

Mine sticks out farther image.png.40ddf1d621a8b30d71a08549fdc2fdf9.png

How do you like that reese hitch extension? Does it hold up very well or in your opinion is the superhitch a better option? Trying to decide on which one for my 2020. Thanks

  • 6 months later...
  • 1 year later...
Rikbug New Member

Rikbug

Posted
Posted

I saw on this forum somewhere that a guy had researched and found the wiring harness that would plug in where the camera and tailgate lock controls plug into. He posted a pic of harness and part #. Now I can't find it and want to order one.

On 4/2/2020 at 10:11 PM, Gerry Ireland said:

I unplugged mine  no dummy plugs to protect wiring harness and no cameras were working

 

Another JR Senior Enthusiast

Another JR

Posted
Posted

You don’t need a dummy plug or harness just to protect the connector. It is quite easy to bag the connector to protect it.     You also can get just a camera cable separately to hook up a replacement for the tailgate camera. I bought a gm tailgate camera of the same part number for $90, made an enclosure and installed it on the back of my camper. I bought my FAKRA cable from Pasternack.com for around $30. 

9F0DB3A0-184A-41B5-9E68-BE411A5BB194.jpeg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • xdieselmechanic
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By xdieselmechanic · Posted

      I apologize for long post put going to try to explain everything. Parts replaced so far: Cam sensor Crank sensor Cam phaser valve Cam phaser solenoid Fuel pump Maf 1 injector Pcm Pdm   So about 2 weeks ago coming off the highway my 2007 yukon xl with the 6.2 stalled and would restart. Had unit towed back to house and I messed around with relays and unit started. Drove it the next day and same thing. Had it towed again. Scanned unit and had code p0300 with misfire data showing mainly cylinder 7 but I know that won't cause a no start. Measure fuel pressure and found only 42 psi replaced pump to have unit stall again and not restart. This time I stayed on back roads and just waited for it to restart about 30 to 60 min. During this time I found I have no injector pulse but have good power at injectors. Started unplugging 1 injector at a time and found when unplugging cylinder 7 pulse came back so i changed injecto and same issue. Turns out unit just happen to ready to start at that time. Scanned into unit and found no reason for the pcm to take away injector pulse so I replaced the pcm and same issue. I figured timing sesnor controlled the injector pulse so I replaced both sensors and while I had the water pump of i replaced the vvt components while i was in there. Read multiple people have luck chaging the maf for this issue so I changed it. Unit still stalls to this day and loses injector pulse on the ground side when it does. Have noticed watching the live data the pcm is request injectors to fire via injector pwm value. I have redone the ground wires at the left bottom of the block knowing this was the ground location for the pcm but still no luck. I am a mechanic by trade but this is having me pull my hair out. If anyone has something to have me check I will gladly im not much of a parts thrower but im about to load the cannon
    • newdude
      auto mechanical driver's door unlock without pressing button? [2026 Silv. 1500 WT 4WD RC SB 2.7L]

      By newdude · Posted

      Actually.  Wait.   I just re-read your original post.  Are you talking from INSIDE the truck you have to hit unlock?  Or from the key fob?  I had assumed from the key fob.   IF you are talking the inside unlock button, I assume you are shifting to park and its not unlocking the doors?  If so, that is changed via the settings page in the radio.  Go to SETTINGS, then VEHICLE and then it should be under LOCKS or DOOR LOCKS or something like that.  
    • newdude
      auto mechanical driver's door unlock without pressing button? [2026 Silv. 1500 WT 4WD RC SB 2.7L]

      By newdude · Posted

      Just pull the inside door handle.  It has mechanical override to the lock.  
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      Got to have those sliding doors. One of my favorite things about a minivan. The Kia does a good job of making a minivan look like an SUV. I may do a Toyota next. I want the awd option.
    • HajjitheDoberman
      Mixed info from dealer and manual RE: 10 Speed 45K service

      By HajjitheDoberman · Posted

      I took my 24 Sierra Denali 4wd in at 37,000 miles. Had the mileage maintenance checks done, asked them to change out the two limited slip differentials, including the limited slip additive, and change out the transfer case fluid. They rotated my tires, verified my shocks weren’t leaking, and whatever minor checkouts that were on the list for 37,000 miles. About three hours later, they charged me $600 and sent me off. I was considering having the 10-speed transmission serviced, but between the posts on this forum and previous experiences with transmission failures after a fluid and filter change, I decided against the tranny fluid changeout when the service advisor told me it would take about 3 hours and cost about $500. After growing up working in three different full-service gas stations, I know to stay far away from flushing machines connected to any automatic transmission. I don’t meet the severe duty schedule, but I may follow the 45,000 mile tranny service, unless  i see more problems from doing so on the forums. I expect I will want to watch the entire procedure. The various utube videos do a decent job of showing how much time and attention should be taken for a correct fluid &filter replacement, so witnessing the procedure seems something I should do. Trust but Verify🥳 Otherwise, I’ll follow the owner’s manual recommendations, whatever they are.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...