Jump to content

Recommended Posts

Posted

DMR is the route I'm going.  got a cellphone signal and I can talk to the entire planet.  I tried the 146.520 and not a peep.  The only option for 2 meter or 70 cm is to program in all the repeaters along your route.  Seems like a lot of work just to ragchew while driving.

Posted (edited)

DMR?  Something new to learn about.  This is getting bigger the more I learn about it.  I move every 3 years.  I could acquire a database of repeaters.

 

Getting back to CB, thoughts on Midland CMX760???  I know it's discontinued and only units available are what haven't been sold, but it's either that or the Cobra 75 WX ST.  Seems like Cobra is suffering from quality issues, and the 75 WX ST mic is larger, heavier, and Midland has one more feature.  I found a CMX760 for ~$120 NIB.  Everybody else wants $165-$230 for the Cobra. 

Edited by Transient
Posted
3 hours ago, Transient said:

-$200DMR?  Something new to learn about.  This is getting bigger the more I learn about it.  I move every 3 years.  I could acquire a database of repeaters.

There is already a database of repeaters on repeaterbook.com.   Still you have to program the freq, offset and PL tones for each one.  Not an easy task in heavy traffic although you could add everything before you left.  DMR always has someone talking and switching to a tac channel for a QSO is much easier than programming in a repeater.  I hear people all the time, driving trucks in the USA and Europe on DMR.  One guy talks while out walking his dog.  There is even a radio out not that has the cell, hotspot and radio all in one device.  Pricey but convenient.  I have an anytone 878 with an openspot3 and use my cellphone for wifi.  I can carry it in my pocket and take it anywhere.  Too much trouble for me to add antennas and such.  I have a portable HF rig if I want traditional when I get where I'm going.

 

The downside to DMR is you can't listen to trucks for traffic etc but if I'm stuck in a parking lot going somewhere like I95 I can still entertain myself.

 

I used an HT with a mag mount on my 2500 on a trip to Florida.  Nothing not a peep on national calling channel and I tried every 10-20 miles.

Posted

Same here, I've drove almost 1,000 in the southeast with the ham radio on 146.520, I never heard anything.

 

CH 19 on the CB though, is pretty active. Especially if you get near larger truck stops or in the city. It lights up during any traffic jam.

Posted

Pulled the trigger on the Uniden CMX760.  Now looking into antennas and whether or not I need an external speaker.  I think I've come up with a way to install antennas without going too high in height, but considering going dual based on what I've read about needing to balance between the left and right.  Any recommendations?

 

Btw, have any of you on DMR contacted the space station yet?

Posted

Just thought I'd follow up on the CB radio deal I found.  It was ebay and started at $121.  Sold for about $220.  No, it wasn't me.  I found another elsewhere for less.  Once the ebay bidding went too high I bought the other one I found.  Somebody paid way too much for a Uniden CMX760.

Posted
18 hours ago, Transient said:

Just thought I'd follow up on the CB radio deal I found.  It was ebay and started at $121.  Sold for about $220.  No, it wasn't me.  I found another elsewhere for less.  Once the ebay bidding went too high I bought the other one I found.  Somebody paid way too much for a Uniden CMX760.

 

A lot of "preppers" are in to radio comms (ham and CB), so there's been an increase in the sales of them I'd say in the past ~5 years or so.

 

Or maybe that's just my observation 🤷‍♂️

Posted (edited)
2 hours ago, nichos said:

 

A lot of "preppers" are in to radio comms (ham and CB), so there's been an increase in the sales of them I'd say in the past ~5 years or so.

 

Or maybe that's just my observation 🤷‍♂️

Doing some digging, it appears this particular CB is out of stock everywhere.  Some websites say it'll be available after the 15th.  Does that mean this CB is that much better than the Cobra 75 WX ST?  Still finding those in stock everywhere.

Edited by Transient
Posted

"Better" in which way? The most important thing with CBs is the antenna. Personally, I like the president radios, but they're a bit higher up in price. They make some ultra compact ones though.

My advice is narrow down to budget, features that you want/must have, and focus the rest of your money and research on a good antenna.

 

Good luck!

Posted
On 1/5/2022 at 7:05 PM, nichos said:

"Better" in which way? The most important thing with CBs is the antenna. Personally, I like the president radios, but they're a bit higher up in price. They make some ultra compact ones though.

My advice is narrow down to budget, features that you want/must have, and focus the rest of your money and research on a good antenna.

 

Good luck!

Based on the prices in finding for CBs, money really isn't an option.  It's cheaper than I thought it was going to be.  I went into this assuming I'd be paying $300-$400 for a CB.  I wanted an All In One because all the controls are in the mic.  It's more compact/concealable, and won't affect my passengers.  I am hung up on the antenna research at the moment.  Just haven't been able to commit the time to searching like I want to.  Lots of other things going on right now.  Not a biggie.  Seems UPS is taking its sweet time getting my delivery to me.

Posted (edited)

CB finally arrived.  Reading owners manual, it says to wire to something switched so it's off when the truck is off and on when the truck is on.  Anybody who has done this, do you have a suggestion of where to connect into?  I'm honestly being lazy in asking this question.  Just thought I'd ask before I did something that screwed up my truck or the radio.  The alternative is to connect directly to the battery. 

Edited by Transient
  • 5 weeks later...
Posted (edited)

I had one running in my '15 Silverado, then it got totaled, and I haven't completely set it up in my '18 Silverado ME.  I'm trying to find an antenna cable that I can route like the one that was left in my '15, after the wreck. PLUS, I'm not quite sure where I want to put the radios in my '18, yet, will either be INSIDE my center console box, or I may convert the forward section to a 14-15.  Also, I tried using my CB with my home antenna and I'm pretty sure that either my mic or my radio is broken, BUT my scanner works like a champ.

 

The cupholder in the 14-15 could be moved all the way forward (like below), all the way back (like 16+ are), or halfway inbetween.  All the way forward exposed a DEEP pocket for my radios and bracket to sit.

395663275_CurrentRadioConfig.thumb.jpg.a65b28535bedf03ca114a2e7f6732fdd.jpg

 

With the tunneau cover, I had to mount the antenna on a stakehole bracket, extended to the outside.

1980261228_FIRSTInstallNO-Spring90maybeCORRECT.thumb.jpg.c9cce6adde42766b6c04f79313872cc5.jpg

 

I got tired of laying the mic in the pen tray at the front of the console, so I did some looking, and found that Steelie's/Nite-Ize's little magnet was the perfect fit to the knob on the back of the mic, and I could use their vent clip to hang the mic on.

929713764_MicMagnetMountVent.thumb.jpg.6e1a814fb256b48b88c4834879926782.jpg

1034688423_MicMagnetMountVent1.thumb.jpg.dc3851b2ac74662b8d68998ab4faafb2.jpg

Edited by Ravenkeeper
  • Like 1
  • 2 weeks later...
Posted

Finally getting the cb antenna sorted out.  Going with the President Electronics Mississippi.  Mounting it on top of the GM Accessories sport bar via a low profile mount.  We'll see how this works out. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,286 Guests (See full list)


  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...