Corsa performance exhaust 6.2 fit on 5.3?

[Frankielozano214]

So I got a deal on a corsa performance exhaust but it’s for 6.2 off 2016 Silverado..... I have a 2014 Silverado with a 5.3 would it work? I have a small exhaust leak (missing the donut where the y-pipe and manifolds meet at) so I figured I’d just swap the whole exhaust with something better wonder if this would help it or hurt? Also thinking of changing the intake to the 6.2 I think I’ve seen couple people do that on here... 

 

 

 

 

 

 

Edited June 28, 2020 by Frankielozano214

[Codman67]

It should fit Frankie the muffler clamps are the same size for the 6.2 and 5.3 

[Codman67]

I just bought a new one cause my Corsa is on back order so when the time comes I won’t worry about using the original one 

[Frankielozano214]

Well I mean will this bolt up straight to my current 5.3 Y-pipe? Is this flex pipe bigger then the one that’s on my truck currently? This is off a 6.2 exhaust 
 

I know all the hangers are on the same place so those will fit perfectly. 

 

Edited June 29, 2020 by Frankielozano214

[Codman67]

It should the part number for the two is the same

[Frankielozano214]

About to go take a picture of my factory setup, thanks hope it’s good got this for a really good deal don’t wana sell it if I can use it

 

 

 

 

Edited June 29, 2020 by Frankielozano214

[Codman67]

For sure they are pricey in Canada

[Frankielozano214]

Yeah I looked it up before I bought price was like 1400/1500$ 
 

posted pictures of the current stock setup looks pretty old and thin

Edited June 29, 2020 by Frankielozano214

[CamGTP]

The 6.2 clamps is larger than the 5.3 clamp. The ball flange dealio on the cat-back is larger on the 6.2's because the overall exhaust size is larger on a factory 6.2.

 

But what I don't is if the corsa system used the same size clamp as the 5.3's.

 

Having worked in a parts store, I always have to send people to the dealership to get the 6.2 clamp because our computer system says the 5.3/6.2 clamps are the same size but with a tape measure they are clearly not the same.

[Frankielozano214]

9 minutes ago, CamGTP said:

The 6.2 clamps is larger than the 5.3 clamp. The ball flange dealio on the cat-back is larger on the 6.2's because the overall exhaust size is larger on a factory 6.2.

 

But what I don't is if the corsa system used the same size clamp as the 5.3's.

 

Having worked in a parts store, I always have to send people to the dealership to get the 6.2 clamp because our computer system says the 5.3/6.2 clamps are the same size but with a tape measure they are clearly not the same.

Might just let the muffler shop install it, I looked up both the 6.2 (3.5in) and 5.3 (3.0in) Corsa Performance Exhaust and it’s about .5in difference so I’m wondering if the shop can make something work

Edited June 29, 2020 by Frankielozano214

[CamGTP]

Any exhaust shop could just chop your flex joint with flange and weld it straight to the corsa system if they had too.

[Frankielozano214]

More air out mean more horsepower right? I needa buy a cold air intake still

[dieselfan1]

More air out mean more horsepower right? I needa buy a cold air intake still

Save your money for gas .
I see a lot of your pics are at the pumps[emoji2957][emoji2957][emoji2957][emoji40]

Sent from my Pixel 3 using Tapatalk

[dieselfan1]

Your truck looks killer Frankie [emoji106][emoji106][emoji106][emoji106][emoji40]

Sent from my Pixel 3 using Tapatalk

[Frankielozano214]

Sold my little old wheels today