Jump to content

Recommended Posts

Posted

I tried the search button, but couldn't find my particular issue.  I went into the vehicle settings and enabled auto memory seats.  When I drive, turn the truck off, and then open the driver's side door, my seat goes to the exit position automatically.  I thought that when I got into the truck and start it up, that it was supposed to go to my memory driving position (1).  Mine doesn't, so I have to manually push the (1) button to get to the right position.


I know, first world problems, but wasn't sure if I'm doing something wrong or if that is the way I'm supposed to do it.

 

Thanks in advance

Posted

You have to assign the saved seating position to one of your keyfobs in order for it to do what you’re describing. Look in your owner manual and I will tell you how. I can’t recall off the top of my head.

Posted

Sounds like the truck may have 'Seat Entry Memory' turned off.

 

Vehicle Personalization Settings

. To have the Seat Entry Memory movement begin when the vehicle is started,

select the Settings menu, then Vehicle, then Seating Position, and then Seat Entry Memory.

Select On or Off.

See “Seat Entry Memory” later in this section.

 

. To begin Seat Exit Memory movement when the vehicle is turned off and the driver door is opened, or when the vehicle is
turned off with the driver door already opened,

select the Settings menu, then Vehicle, then Seating Position, and then Seat Exit Memory.

Select On or Off.

See “Seat Exit Memory” later in this section.

 

 

Seating Position
Touch and the following may display:
. Seat Entry Memory
. Seat Exit Memory 

 

Seat Entry Memory
This feature automatically recalls the previously stored 1 or 2 button positions when the ignition is changed from off to on or ACC/
ACCESSORY. See Memory Seats
0 59.
Touch Off or On.

 

Seat Exit Memory
This feature automatically recalls the previously stored exit button positions when the ignition is changed from on or ACC/ ACCESSORY to off if the driver door is open or opened. See
Memory Seats 0 59.
Touch Off or On.

Posted

Thanks, that's what I did in the vehicle settings, followed from the owner's manual.  I have both seat entry and exit turn on.  I'm going to go try and clear the current settings and start over.

Posted

Figured it out.  The key fob the dealer had marked as number 1 was actually number 2.  Good times!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • How many years have I pointed out every point in that link to the folks here and been avalanched with criticisms and outright hostilities at times? I ran counter to even the great CUSTOMBOSS and Lake Speed Jr and the half dozen experts on YouTube and in the final.....GM, Physics (Stribeck) backs that Grumpy old Bear.    Honestly, I never said a thing engineering hadn't studied silly and laid in concrete during WWII. But I'm old, the information is old and yet, the Laws of Physics are eternal.    Okay there is one exception. I vehemently disagree with their use of the word 'tolerances' when what it meant is "clearance".   The clearance is the distance between two objects. The tolerance is the degree of acceptable variation permitted in that clearance. I.E., piston to bore clearance is 0.004" with a tolerance of +/- .0002" so the clearance is in specification if it lies between 0.0038" and 0.0042". Cutting that 'tolerance in half has ZERO impact on lubrication requirements. Makes for more difficulty in manufacturing.  But a tighter clearance 'MAY'. Depends on finish. Anyway....   It's one of those statements made by people to make themselves look smarter than they are to convince people who are as un-enlighten as they seem to manipulate their behaviors. But hey, the blind leading the blind puts them both in the pit. 
    • Out and about yesterday on a long Saturday drive I passed a lot of Shell stations. My preferred, so I pay attention. Lot's of small town Illinois so not six stations in three blocks like the city.    Everyone of them over a radius of say 100 miles had regular at $4.19 but one which was the one closest to home at $4.15. However Premium pricing varied greatly between 85 cents over regular to $1.50 over. I'm not counting the price of the station with the lowest regular so the reference is the same for the remainder and all within the same brand. However the spread discrepancy holds across all brands.     @txab, any thoughts on that? 
    • What are your thoughts? The Chevy Blazer relaunch was an epic case of 'lunchbag letdown'. Jeep Wranglers and Ford Broncos stick out like a sore thumb.    The AI photos do not look like a 'retro version', but shrunken Tahoes. Get away from the 'futuristic look'. I've seen two concepts. One had rectangular headlight like a Rivian and the other way to big should include dual round headlights like the early version.   If not this would look OK   At least it has GM styling (albeit the K2XX) A lot of the images floating around look like Bronco IIs or the current Bronco. Looking at the Broncos in my area (central Ontario, it seems to be a mix of 2 doors and 4 doors, 'mall rated' to ones that could go offroad.    I'm sure a AT4 and AT4X RPOs could be outfitted similar to a Rubicon if the braintrust understood the whole offroad scene. Crosing my fingers that if it does see the light that the front air dam/bumper doesn't extend below the center line of the tire...      
    • I saw this news earlier this year:   https://theautowire.com/2026/06/12/gm-kills-off-chevys-biggest-silverado-trucks-as-sales-collapse-and-factory-fallout-spreads/
    • And overpriced. I was in the Oshawa Truck Plant when they were being built. Very few. I could count on one hand how many I've seen since  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...