Jump to content

Unable to adjust HVAC fan speed

Corsair152

By Corsair152
in Troubleshooting & Recalls

 Share

Recommended Posts

Corsair152 New Member

Corsair152

Posted
Posted

Hi, 

 

Recently purchased a used 2014 Silverado LT 5.3L.

Everything has been working great except recently I can no longer adjust the fan speed of my AC.

 

I can still feel air, hot or cold in any vent I select, but it blows on what feels like the minimum setting no matter what. Even if I turn off the fan completely there's still a slight blow to it. The info screen displays that I'm adjusting the fan speed and everything, but nothings actually changing. 

 

Wondering if anyone else had this issue or possibly knows what it could be? Blower motor? Thought I'd check before I took it to a mechanic. 

 

Thanks!

davester Senior Enthusiast

davester

Posted
Posted

I believe GM is using the same setup for your truck as they used in mine, and for mine, it's not unusual for the resistor pack, and/or the connectors to the resistor pack & the blower motor to fail.  It's possible yours has failed in a way so it always provides a little power to the motor.  Maybe go and unplug and look at the connectors, and take out the resistor pack and look at it for damage, and possibly test that the different connections provide different resistances with an ohmmeter.

Corsair152 New Member

Corsair152

Posted
  • Author
Posted

Thanks for the replies guys. Took me a while to actually get the time to fix this thing. 

 

So I took out the blower motor and had a look at it. Put it back in and it started working perfectly for a little bit. Last night I turned my truck on and the motor was on full blast, even with the dial turned off. I turned my ignition off and it was still blowing. I've unplugged the motor for now, but every time I plug it in, it turns on still regardless of the truck running or not.

 

Would this be a relay? I was told there is no resistor pack for this year and it's just a control module.

 

Any help would be appreciated, thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Disassembly may be Required!   Every blender makes claims but do  you ponder those claims? What was really said? Was it true?  Motive for saying it? What does in infer?  Is that inference true?    Let's do one.    Claim: Made from shear stable base oils.    What was said: Base Oils are shear proof.   Was it true: Yes.  ALL base oils are Newtonian.    Motive / Inference: To imply the fully formulated product is Shear Proof.    Is the Inference true?: Most fully formulated multigrade oils contain Viscosity Modifiers or VM's, sometimes called VII or Viscosity Index Improvers. There are four types. One is in fact shear proof but it also has a bad effect on extreme cold flow and is restricted to use in specialty oils. A second has limited shear called a 0-5 SSI polymer. Meaning its shear is limited to a range of zero to five percent as reported by the ASTM D6278 Shear Stability Index test. A few high end oils, like Torco SR-5, use them and brag about it profusely. Actually all that use it point it out. The last two shear dramatically and are often marketed as a 'feature' of the product aiding the oil to meet fuel standard requirements of ever stricter rules. One shears more than 5% and the other up to 20%. As you make guess, cost is directly linked to shear down and as such the majority of oils use the cheapest organic polymers sold to make grade and pass stringent tests.    PPD's or Pour Point Depressants also shear a bit, only a few percent and hide inside the 0-5 SSI capabilities.    The blender knows he can not out engineer Stribeck. Physics is not a suggestion. But he can wordcraft the unsuspecting toward believing a false claims INFERENCE. This is LEGAL. It is COMMON, and it is EFFECTIVE.         
    • Jsdirt
      2006 Silverado HVAC sensor location in dashboard

      By Jsdirt · Posted

      I don't recall ever dealing with one on an '06 and back. It may not even exist on that. I can't remember for sure.   Any kind of ice in or after the evaporator is normally due to low charge with both a clutch-cycling orifice tube system, and a TXV system.
    • Grumpy Bear
      HighMileage oils or stay with Dexos 1 ?

      By Grumpy Bear · Posted

      Engines wear. It is unavoidable. So the question isn't if it will wear out but rather WHEN it will wear out. That question is about rate and RATE is a HUGE problem for almost everyone; but not in the way we may think.    Unless there is something drastically wrong with your powertrain, wear is exceedingly slow. It doesn't wear out in minutes or hours or days or months but in years or even decades. Ditto sludge and varnish. Humans are an impatient lot so to see the benefit of a truly superior product you may have to wait a very long time. Most will get bored first and trade before they reap the benefit.   Humans are not companionate creatures when it comes to those we do not know. We don't care what happens to the second or third owner as long as it doesn't happen to us or someone we know and actually like.   Sad commentary on humans but it is what it is. That thus, then, there is no advantage...to or for you if the above paragraphs adequately describe you.    BUT if you are a buy and hold type and patient enough to reap the rewards of your labors then that thing that is happening that you haven't yet seen, but will; can be abated by such products. Seals harden and leak with time and lots of it. Rings stick after thousands of miles of a slowly building plaque of varnish.    Then there is this. This didn't happen over night and this poor fellow knew when he removed the cover and not one second before.   Not "aware' isn't the same thing as "isn't happening".        The above was typical of the Ford 361 and 391 bus motors on Bulk Pennzoil Mineral Oil products on 3K mile OCI's at about 60K miles back in the 60's and 70's at the Anamosa School District when my Uncle took over their maintenance program.    This is Pepper at @ 165K on 5K OCI's using Group IV/V Full Synthetics.      HM oils will help the first but not the second.    Then again if one used..... ah, ya know.....
    • Coastie05
      Doors lock and mirrors fold in while driving

      By Coastie05 · Posted

      Thanks for coming back with an update. 
    • MikeBMW
      Doors lock and mirrors fold in while driving

      By MikeBMW · Posted

      Awesome you got it sorted! That's a new potential issue I'll have to mark in my book of issues. Thanks for the feedback.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...