Accent lighting wiring.

[Ervin Gay]

Please help. I am installing accent lights on the exterior and interior of my truck. Does anyone know how I can wire them to turn on when the doors open on my 2020 silverado 2500HD?

[swaptrex14]

Interested in this as well

[motorsswin]

Just a matter of finding the dome light wire. Hopefully someone can point us in the right direction 

Edited January 3, 2021 by motorsswin

[brockhals]

you'd need to find the "door trigger" wire, or utilize the Dome Light wire.  I found this online for a 2019, may be the same.  Depending on the lights you are doing you may need to add in a relay to carry the amperage your lights may require.

 

Left Front Door Trigger     Gray or Pink (power window)     -     Driver Door Latch, green 10 pin plug, pin 1

Left Front Door Trigger 2     Gray (manual window)     -     BCM under driver dash, gray 26 pin plug, pin 25

Right Front Door Trigger     Gray (power window)     -     Passenger Door Latch, green 10 pin plug, pin 5

Right Front Door Trigger 2     Gray (manual window)     -     BCM under driver dash, gray 26 pin plug, pin 14

Left Rear Door Trigger     Gray or Green     -     Left Rear Window Switch, black 10 pin plug, pin 2

Right Rear Door Trigger     Green     -     Right Rear Window Switch, black 10 pin plug, pin 2

Dome Light     Gray     +     BCM under driver dash, white 26 pin plug, pin 23

[Grjfer]

Reviving the dead here as I am looking to add lights to shine on my running boards. I did this on my 2015 GMC sierra 1500 using the puddle lamp circuit on the BCM. Does anyone know which wire this would be on the 2500HD? Picture for reference.