Jump to content

Recommended Posts

Posted

Hi All, 

 

I've got a 2017 GMC 1500 Denali, 5.3L, that's got a 2" RC level kit  with 285/55r20 on stock chrome 20" Denali wheels.  Looking to upgrade & put a true lift on it.  But I'm torn on which way to go.  Here are the three options I'm considering...

 

  1. 4" Fabtech Uniball Magride and 305/55r20s - At first I thought for sure this would be the way I'd like to go.  Nice mild lift with 33" tires that shouldn't really have much of any performance issues for the truck.  This 4" lift is one of if not the only Magride compatible lift at this level. The problem is that the 305/55r20's are actually only about 3/4" taller than my current set up.  Fabtech's website states that this lift would fit up to a 295/55r20 tire which kind of surprises me & is maybe 1/2" more tire than my current 285's.   Some pics I've found show some trucks looking just like I'd like, some even running 35's, but others looking like there's almost no change to the truck's stance. 
  2.  6" Fabtech Gen 2 Magride & 35x12.50r20s - Saw a truck this weekend with a sim set up & it looks just about right to what I'd like my truck to look like.  This Fabtech lift also doesn't offset the front like many other lifts which may be a plus.  Don't know how well this would work with stock 20" wheels.  
  3. 6" BDS Denali lift with 35x12.50r20's -  Seems to be a very popular lift.  Little more expensive than the 6" Fabtech but not terribly so.  Does offset front end a bit & requires 2" spacers for the rear to match if i'm not mistaken.       

 

So, with all that said, what'd you choose & why?  Any pics of these set ups would be helpful, especially from those with the 4" Fabtech lift.                            

Posted

If you're going to lift it , lift it. Go as big as you can afford.

Ditch the factory wheels too.

A lot of guys dipping their toes in the lifted truck water always want to keep their factory wheels. I did at one time too then I realized the offset looks dumb IMO.

 

Go here and look at hundreds of trucks like yours with 6" lifts and 35's

 

www.customwheeloffset.com

 

Go to the gallery and enter your truck and see what lift, wheels, tires look like

 

Sent from my Pixel 3 using Tapatalk

 

 

 

9deb229837b44f41f9e73356c2579f90.jpg

 

 

Posted
1 hour ago, dieselfan1 said:

If you're going to lift it , lift it. Go as big as you can afford.

Ditch the factory wheels too.

A lot of guys dipping their toes in the lifted truck water always want to keep their factory wheels. I did at one time too then I realized the offset looks dumb IMO.

 

Go here and look at hundreds of trucks like yours with 6" lifts and 35's

 

www.customwheeloffset.com

 

Go to the gallery and enter your truck and see what lift, wheels, tires look like

 

Sent from my Pixel 3 using Tapatalk

 

 

Thanks Dieselfan1.  I do like the look of a 6" lift & 35's.  Can find a million pics of that setup too.  Harder to find good pics of the Fabtech 4" Denali lift though.  Seen a few with Fabtech's 4.5" knuckle lift & some of those with 35's as well.  Haven't seen any with the 4" denali/magride compatible thought.  

 

The one hesitation I have with a 6" lift & 35's is the expense.  They tend to be a little have more expensive tires, less gas mileage, more wear, etc.      

 

 

 

 

Posted

What's your budget for everything?

If you're not ready to drop at least $6000+ just for the lift, wheels and tires, and another $1200-1500 to install it, and a bunch of other stuff you'll want after you lift it, put a level kit on it and new tires call it a day.

Don't be so afraid to spend money and roll like me and my pal Frankie.

Oh and let's not forget my Bro covetedstyle[emoji857][emoji857][emoji857]

 

BTW I went shopping for you....

 

https://www.customwheeloffset.com/cart

3d5963c591edff64740994b7dca9aba5.jpgda0bad4e5022db78ab7c980eff1d3d97.jpga97649c35f3e18c091f45423ca539180.jpg

 

Sent from my Pixel 3 using Tapatalk

 

 

BTW we roll McGaughys 9"

 

  • Like 1
Posted

LOL!  $6000 + $1500 for install wasn't exactly within my budget.  More like $3500 for lift & tires is more like it for me.  Staying with the stock wheels for now.  That can be changed later on if I change my mind on the look & save me some cash for exhaust that I'll need next.  Labor cost will be only for the alignment once installed as I'll do the actual lift myself.  

 

Nice truck you got though...   

Posted

So not a Denali, but I have 3.5 of lift and 34s, on stock wheels, will give you an idea of the 4" lift size. I am right at 2k for tires, lift, and alignment. 

20210115_134416.jpg

  • Like 1
Posted
8 hours ago, YukonXL04 said:

So not a Denali, but I have 3.5 of lift and 34s, on stock wheels, will give you an idea of the 4" lift size. I am right at 2k for tires, lift, and alignment. 

20210115_134416.jpg

Nice clean looking setup.  Any rubbing or trimming required to fit those?

 

Posted
46 minutes ago, steve76t said:

Nice clean looking setup.  Any rubbing or trimming required to fit those?

 

Thanks, I like it alot. I am running 1.5" wheel spacers, so I had to trim the back side of the fender. Could have eliminated the rub with zip ties probably, but I wanted plenty of clearance so I did the norcal mod, I have over 1 inch on all sides, all steering positions now. And the factory plastic covers all signs of trimming.

Tires are 295/60R20 Falken Wildpeak AT3W

 

Here's a pic next to a stock chevy

20210117_113157.jpg

  • Thanks 1
Posted

I installed the fabtech gen 2 a couple months ago and have no issues at all with it.  I picked that lift because of the factory track width.  I wanted to run a 12 wide wheel without sticking out farther then needed.  

Posted
16 hours ago, vhreso said:

I installed the fabtech gen 2 a couple months ago and have no issues at all with it.  I picked that lift because of the factory track width.  I wanted to run a 12 wide wheel without sticking out farther then needed.  

What size tire do you have, what’s offset of your wheels & did ya have to trim much to make clearance for the tires?

 

Posted
On 1/21/2021 at 1:35 AM, steve76t said:

What size tire do you have, what’s offset of your wheels & did ya have to trim much to make clearance for the tires?

 

I have 22X12 -44 offset with 35" tires.  I was hoping to only need to do minor trimming but i ended up having to a norcal mod and minor trimming on the front valence.  

Posted

I'm thinking you pretty much have to norcal mod most of these trucks once you get into negative offsets. Im at a -12. Granted my kit said a 33 on stock offset was recommended tire size up to a 0 offset. Im a 34 on -12 so thats on me.

Posted

I have a 2018 Silverado custom. Went with a 4” lift and running 35x12.5R18. Did some minor trimming and everything is good. Love the lift. No rubbing at full turns and articulation off road. 

Posted
On 1/23/2021 at 7:19 PM, Jdherron said:

I have a 2018 Silverado custom. Went with a 4” lift and running 35x12.5R18. Did some minor trimming and everything is good. Love the lift. No rubbing at full turns and articulation off road. 

35's with only a 4" lift?  That leaves me with some questions... Which lift did you go with & what are you specs on the tire/wheel package?  Was advertised as a 4" lift or was the the actual amount of lift your got from the kit?   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,063 Guests (See full list)


  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...