Jump to content

Adding front cam. Is it possible?

Offroadman00
 Share

Recommended Posts

Offroadman00 Enthusiast

Offroadman00

Posted
Posted

Hello everyone. I am interested in doing the rear view cam mirror mod that is listed here and about to purchase all the parts. I also want to know if its possible to add a front facing camera too or will that need something to be reflashed by dealer or WAMS?

 

2019 Sierra 1500 AT4 without 270/360 cam. Only have rearview cam

Offroadman00 Enthusiast

Offroadman00

Posted
  • Author
Posted
45 minutes ago, lapoolboy said:

Don't order one.  I have one with harness.

Question is, is it possible to do it with what i have stock with the truck or will it need to be reprogrammed? 
 

and when you say dont purchase one because you have one, are you sending it to me :)

Offroadman00 Enthusiast

Offroadman00

Posted
  • Author
Posted
31 minutes ago, Mac-427 said:

Here is the approach I used.  Not exactly what you are thinking of but it works well for me.

 

Thanks but not something i want as I do not have a front plate nor would I want to use a phone as a ponitor

Donstar Senior Enthusiast

Donstar

Posted
Posted

I did something similar with a wireless camera from amazon.  It was part of a camera setup I installed for towing my travel trailer.  After I sold my trailer,  I also gave up my dependence on cameras.  Pickup trucks have always been a challenge to park but with practice (and perhaps a few bumps 😉 ) you can get pretty precise with the placement of your front bumper.  I'm not adding this as a criticism to camera technology as my next vehicle will have 360 view!   When you watch the coming and going of trucks in a crowded parking lot you'll see some drivers park their trucks like it was a smart car.  Others, need two stalls and several attempts to dock their trucks.  I like to challenge myself to park quickly and precisely using only my windows and mirrors.  

Rally6.2RST Enthusiast

Rally6.2RST

Posted
Posted

If you wanted oem camera system it would be hard to add on a truck with no VCM but might be possible if you had ios or iot radio.  I had an RST with a VCM because I had bedview package.  A truck with only rearview cam does not have a VCM.  I was able to add oem front cam by swapping VCM with a 360 one.

Tbaem Enthusiast

Tbaem

Posted
Posted
On 4/13/2021 at 10:14 AM, Donstar said:

I did something similar with a wireless camera from amazon.  It was part of a camera setup I installed for towing my travel trailer.  After I sold my trailer,  I also gave up my dependence on cameras.  Pickup trucks have always been a challenge to park but with practice (and perhaps a few bumps 😉 ) you can get pretty precise with the placement of your front bumper.  I'm not adding this as a criticism to camera technology as my next vehicle will have 360 view!   When you watch the coming and going of trucks in a crowded parking lot you'll see some drivers park their trucks like it was a smart car.  Others, need two stalls and several attempts to dock their trucks.  I like to challenge myself to park quickly and precisely using only my windows and mirrors.  

Which one did you use?

Donstar Senior Enthusiast

Donstar

Posted
Posted
1 hour ago, Tbaem said:

Which one did you use?

I bought the Haloview wireless system with 7" monitor/recorder and camera for behind my trailer. I added their licence plate mount camera for my front view.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined

  • Who's Online   1 Member, 0 Anonymous, 1,282 Guests (See full list)

  • Latest Articles

  • Posts

    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • davester
      Possible lifter tick after DOD delete

      By davester · Posted

      yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • Grumpy Bear
      Sugar Bears 2015 GMC Terrain SLE-2 2.4 AWD

      By Grumpy Bear · Posted

      286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • AidenVorpagel
      cam upgrade in CA

      By AidenVorpagel · Posted

      hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...