Jump to content

Emissions System Error

H.B. Shannon
 Share

Recommended Posts

H.B. Shannon New Member

H.B. Shannon

Posted
Posted

Anybody out there ever get this message on their display? "Service Emission System" all to find out it was a reductant system tamper code? Just wondering if this could have been from just recently using cheap O'Reillys DEF fluid because they were out of blue DEF. Some folks tell me it doesn't matter but sure is a coincidence that I got this message 3 days after pouring the cheap stuff in!

kylant Enthusiast

kylant

Posted
Posted

doubt it. most people use the cheapest stuff they can find.

I personally us the regular Blue DEF.

however, there have been numerous reports of issues after the Blue DEF "platinum" stuff is used. GM blames it on Peak, Peak blames it on GM.

 

Sqrls Enthusiast

Sqrls

Posted
Posted

The blue def normal works good. So does the shell rotella DEF. The blue def platinum gave me poor def quality errors then service emissions system. Running it low and shell rotella got rid of the errors. Never had any def or emissions errors with anything except the blue def platinum. Take that how you will. 

rblanch Enthusiast

rblanch

Posted
Posted

On my recent road trip pulling a 17,000 gvw toy hauler the service emissions system light came on around 175 miles from my house. We stopped at a local GMC dealer and was told the dpf needed to be replaced and they could not get one for 5-6 weeks. They reset the computer and gave us enough miles to get home and cancel a trip we had planned for 6 momths needles to say we were very disappointed

  • 2 weeks later...
nick112288 Enthusiast

nick112288

Posted
Posted

I know none of them are perfect, but good lord does it seem like GM can't get their crap together with the emissions. 

 

Across forums for all 3 brands it seems I see more complaints about L5P emissions than the other 2, which sucks because I'd really love to trust a Duramax 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...