Jump to content

the great High Country vs Denali debate

keerf
 Share

Recommended Posts

keerf Enthusiast

keerf

Posted
Posted

hey I've been reading a lot on here and my apologies if there's already a thread on this.  I thought I had secured a 2021 Denali 1500 Diesel but that looks like it might not be an option anymore.  There's a local dealer that has a High Country Diesel coming in.  I've seen stuff that says that the Denali is a more comfortable ride and other stuff that says they are the same ride.  In terms of comfort - interior finishes, ride, cabin noise, would there by any differences between the two (other than cosmetic differences)?  I figure since the High Country has the Adaptive Ride Control it might feel the same?  I'll be using it mostly for highway driving and will only haul things occasionally.  Thanks!

bwoodsmn Enthusiast

bwoodsmn

Posted
Posted

It's not as great a difference in 2021 as it was in 2019.  In 2019 the Multifunction tailgate and the Adaptive ride control were Denali only. As we move to 2021, those features are both available on High Country, which equalizes the feature set between the two greatly.  It comes down to whether you like the chrome look of the Denali, or the body colored trim features of the High Country.  Personally I like the two tone Umber and Black interior option on the High Country, the seats in the AT4 also have some brown trim to break up all that black in the Denali,  and both seats have the same ventilation/vibration alert features.  The GMC digital gauges are cosmetically different that the Chevy ones, the info displayed is the same. The sound deadening is the same, and both have the leaky rear window and the lifters that break, so, eventually it comes down to personal preferences, what's in stock, and where you can get the best deal.

steve841 Enthusiast

steve841

Posted
Posted

Tailgate ...  Denali:  I personally HATE the multipro gate.  Totally useless for me.  Prefer the GMCs exterior.

 

High Country:  Tailgate... Power down and Power UP.  This was gold and truly missed.

 

 

Bamacommander Enthusiast

Bamacommander

Posted
Posted

Give me the chrome  all day. The GMC looks bigger and bolder. Which truck you like boils down to personal preference . I’d be more concerned about the power train. I  have the 6.2 and it gets up and goes. The mpg on the highway  so far is slightly over 20, in the city around 15. I would have preferred the diesel , but there were none available. Only issue with the diesel , is at 150,000 miles you have to drop the tranny to change a belt. If you do the math and calculate fuel savings , you probably come out way ahead with the diesel which will more then cover the cost of the belt replacement vs. going with a gas engine. The good news is there is no wrong answer, whichever one you like is always going to be the correct choice. 

ratman6161 Enthusiast

ratman6161

Posted
Posted (edited)

I don't know about how much of a "great debate" it is.  I was comparing Sierra SLT Vs Chevy LTZ and went with the GMC.   But when it comes right down to it, it pretty much comes down to personal preference, availability, and how much you like a dealer.  In my area, the Chevy dealers seem to mostly carry the lower trim levels while the GMC dealers seem to have more SLT's and up.  But configure two trucks identically and they will come out about the same price for both brands.  Just so happens that most dealers around hear get very few LTz's or High Countries while the GMC dealers seem to get lots of SLT's, AT4's and Denalis.  Also, I just happened to have bought from the local GMC place before and liked dealing with them...and the fact that they were giving me $1100 more on the trade in of my 2019 Canyon than I originally paid them for it. Of course if they sell it for their asking price, they will still make $3800 on it.

Edited by ratman6161

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • William Aldrich
      Bent valve in 2025 GMC Canyon Denali - Requires engine swap at 14K miles

      By William Aldrich · Posted

      NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
    • Silver Yeti
      Poll: Does your truck have the rear window leak?

      By Silver Yeti · Posted

      That's interesting.   There was a factory wire-hole in the back, top of the rear cab, which had a wire for the third brakelight assembly running through it, as well as several holes (10 of them I believe) for all of the studs coming off of the 3rd brakelight assembly itself.   I sealed all of those holes with RTV/silicone as well.   I found it kind of odd, that none of those holes, were sealed with any kind of sealant by the factory - if there was any there, it wasn't very much.   That said, I've been out in heavy rain and have ran the truck through high-pressure car-washes a few times now and she has been 100% water-tight to this point.   I feel very confident in the repair, we'll see how it holds up.
    • Jay-22-2500
      2024 Silverado 2500 HD with the 6.6 Gas (L8T) Engine

      By Jay-22-2500 · Posted

      I bought a used 2022 2500hd with 6.6L in February. In March took a 2200 mile trip towing our 6500 lb trailer. Changed the oil day before leaving and when we were arriving at our 1st destination, low oil light came on (roughly 1000 miles) it was 2 qts low. Now it towed like a dream, no issue there, and we did go through the mountains of TN, but still, 2 qts! Luckily I did purchase an extended warranty. Brought it to the dealership in April, oil change and consumption test. Brought it back last week, 1300 miles, no towing, and no oil showing on the dipstick. GM is reccomending a new engine (cheaper than them rebuilding), we'll see if the warranty company comes through. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      T3's and Ibuprofen. I do have a cryotherapy unit (ice machine) and a lift chair that will allow me to raise my legs above my heart.  There are topicals that I can use once the wound is fully healed.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...