Jump to content

Steering issues?

Scupper

By Scupper
in Troubleshooting & Recalls

 Share

Recommended Posts

Scupper Enthusiast

Scupper

Posted
Posted

I have a 2015 Sierra 4WD  Recently when i am making a slight left turn, i can hear a slight growling sound coming from the front end.

This occurs after driving for a couple of miles.

My tires do not show abnormal wear and they were replaced about 6 months ago.   There are no problems with steering.

I took it to my mechanic and they thought the sound came from the front end transfer case. 

They replaced the fluid but the sound is still present.

Any ideas??

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
2 hours ago, Scupper said:

I have a 2015 Sierra 4WD  Recently when i am making a slight left turn, i can hear a slight growling sound coming from the front end.

This occurs after driving for a couple of miles.

My tires do not show abnormal wear and they were replaced about 6 months ago.   There are no problems with steering.

I took it to my mechanic and they thought the sound came from the front end transfer case. 

They replaced the fluid but the sound is still present.

Any ideas??

Welcome to the site.

 

Are you possibly in AUTO, or 4WD mode?

Scupper Enthusiast

Scupper

Posted
  • Author
Posted

Thanks for responding.  
I am in 2wd mode.   There is a mode for Awd but haven’t been in it in a while. 

which is the correct mode I should be in. 

  • Like 1
  • 1 month later...
Scupper Enthusiast

Scupper

Posted
  • Author
Posted

silveradosid    you were spot on with your assessment.  the problem gradually got much worse.  i brought it to the garage and had to replace the front hubs.  i also had to replace the sway bars.  the truck drives like it's  brand new.  Thanks again.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,737
    Total Members
    8,960
    Most Online
    Christopher Miller
    Newest Member
    Christopher Miller
    Joined

  • Who's Online   4 Members, 2 Anonymous, 1,472 Guests (See full list)

  • Latest Articles

  • Posts

    • txab
      2001 GMC Sierra - Banging feeling in steering wheel

      By txab · Posted

      Without knowing how bad your banging is, one suggestion is the intermediate steering shaft on the steering wheel. These used to be a problem on 800 and earlier series. The feeling/sound was sometimes described as "clunking" and was felt in the wheel. Also there is a plastic piece in the lower column that is referred to as a bearing. Not your traditional looking bearing though. Your ball joints, bushings and tie rods or steering rack (if equipped) are the main point of issues. You never mention total unit miles, only that you've put 60k on it.   You can search the site for help on the ISS description. Plenty of these have been replaced   https://duckduckgo.com/?t=ffab&q=site%3Agm-trucks.com+intermediate+steering+shaft&ia=web
    • GAMark
      Road Master Active Suspension

      By GAMark · Posted

      Yes I have is set with the 1mm disk (Minumim Tension), for spring spacing and I raised my truck in the rear 1.5". You can go 2mm  and I think 3mm if you need.Minimum. We are on our way to TN from GA.. My wife is driving and stated she cannot believe  and   stated she can not belive the difference.
    • GAMark
      Road Master Active Suspension

      By GAMark · Posted

      Most 1 ton trucks come with the factory overload spring, which need to be removed for installation of RoadActive Suspension. Removing the overload allows proper fitment and ensures the system works as intended. The RAS® Mega-Duty kit will reduce squat and provide significant improvement vs the factory overload spring.
    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      I wonder as well, why they would send me a text message with links to these suggested procedures totalling over $10,000 without even the slightest hint of how they arrived at these being necessary.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      https://precisionlubrication.com/articles/oil-filter-efficiency/     For them it is a problem of $$$$ and compliance. To cover both they have to lie from the heart.    Government wants low waste oil numbers so the bar needs to be very low on contamination to met that requirement.  Consumer wants cheap maintenance (perceived cost). Again requiring a low bar.  OEM wants high margins at a cost effective warranty rate and lots of repeat customers. More low bar.  Filter manufacture wants the same thing the OEM wants. See the pattern?   Consumers are fickle and also want perfection requiring a HIGH bar. Inconsistent with all of the above. Consumers can be, when the put their minds to it, inquisitive, love winning arguments which requires some useful information to be available to support them. And this is where it gets sticky and the lies begin.    Information needs a solid well grounded point of reference if we are to compare in a useful way. There is a standard for this.  ISO 4548-12. This standard sets the particle size at a specific Beta ratio and darn few are faithful to its intent.    If they don't state the test method they change the particle size or the Beta ratio to hit a perceived favorable standard. They obscure the information in a way as to prevent direct comparisons leaving the consumer with one method. UOA's with an ISO 4406 test result. Pricey and not allot of labs willing to do the work. Lobby work happens everywhere, not just at the seat of government.       

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...