Jump to content

Recommended Posts

Posted

So the handle would just freely move about not opening, however luckily I could open from the inside.  Did not see much data about this being the case usually it was bothinside and outside that would not work.  Got the handle out and the Metal Latch that connects the handle to the metal rod link had broke.  Auto parts store did not have so went to auto wrecker yard and they happen to have some new(door handle with link, he had said this happens quite often due to the cold as it freezes and the metal part that connects to the link breaks.  So if you do research and are not finding info on the door just not opening from outside but is from outside it's either the handle itself or the handle linkage rod.  All in all about a 30 minute job, just three screws to remove to get inside door cover off then three more to get the handle itself off.

  • Like 1
Posted
On 12/31/2021 at 7:50 AM, Brenden Burnham said:

So the handle would just freely move about not opening, however luckily I could open from the inside.  Did not see much data about this being the case usually it was bothinside and outside that would not work.  Got the handle out and the Metal Latch that connects the handle to the metal rod link had broke.  Auto parts store did not have so went to auto wrecker yard and they happen to have some new(door handle with link, he had said this happens quite often due to the cold as it freezes and the metal part that connects to the link breaks.  So if you do research and are not finding info on the door just not opening from outside but is from outside it's either the handle itself or the handle linkage rod.  All in all about a 30 minute job, just three screws to remove to get inside door cover off then three more to get the handle itself off.

 

 

 

When I bought my '08 Burban, there was a stack of receipts in the center column. One of them was for a repair to the drivers door handle, because it would not open the door. Just over $1,000 is what the previous owner paid for the repair.

 

They spent $11,400 on repairs in the last 2 years, and then sold it to me for just under $3,000.
 

Good for me, bad for them I guess.

  • Like 1
Posted
On 1/2/2022 at 3:38 PM, Supreme Pizza said:

 

 

 

When I bought my '08 Burban, there was a stack of receipts in the center column. One of them was for a repair to the drivers door handle, because it would not open the door. Just over $1,000 is what the previous owner paid for the repair.

 

They spent $11,400 on repairs in the last 2 years, and then sold it to me for just under $3,000.
 

Good for me, bad for them I guess.

Wow $1000 for the door handle replacement?  Crazy.  Glad I was able to do for just the price of the part ($35) and do myself farily easily.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined
  • Who's Online   6 Members, 0 Anonymous, 1,194 Guests (See full list)

  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...