Jump to content

7-way plug issues

Shawn O'Leary
 Share

Recommended Posts

Shawn O'Leary Enthusiast

Shawn O'Leary

Posted
Posted

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

RocksRock Enthusiast

RocksRock

Posted
Posted
20 minutes ago, Shawn O'Leary said:

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

Hi Shawn:

I pull a large equip trailer. It was plug and play, no problems.
 

I used to pull a 26’ Passport. I would check fuses on RV and truck first. 
If all good there, then dealer. 
Hope this helps. 

Shawn O'Leary Enthusiast

Shawn O'Leary

Posted
  • Author
Posted
7 minutes ago, RocksRock said:

Hi Shawn:

I pull a large equip trailer. It was plug and play, no problems.
 

I used to pull a 26’ Passport. I would check fuses on RV and truck first. 
If all good there, then dealer. 
Hope this helps. 

Didn't think of the fusebox (slapping my forehead). Will check that next before taking it in. 

slj2008 Senior Enthusiast

slj2008

Posted
Posted

Why didn't Airstream check them out when you hook up ??   ON my 2015 the cables were laying by the Fuse Box ( under hood ) one for 12volts power , and the other for all your lights . CHECK your main Fuse box under hood.

EddDe Enthusiast

EddDe

Posted
Posted
12 hours ago, Shawn O'Leary said:

Hi Guys:

 

Bought an Airstream to tow behind my 2019 GMC Sierra Denali (added a leaf spring package and the Brembo brake upgrade to assist with it, but that's another topic). Anyway, the truck doesn't recognize the trailer nor any tester units. Only the 12v power works; none of the signals/lights (rechecked with a multimeter and the same). I've checked the connections and grounds and as far as I can tell everything is fine. I've checked it both with tow/haul on and off; same deal. 

 

Before I throw my hands up and make an appointment with the dealer is there anything obvious I'm missing? Thanks!

Download TSB 20NA198 at this link. There is a problem with 2019 models where light circuit will overload if too many incandescent bulbs are on a trailer. Issue was changed on 2020 models to allow more amps.

https://www.carcomplaints.com/Chevrolet/Silverado_2500/2020/tsbs/tsb-20na198.shtml
 

Dmax3 Enthusiast

Dmax3

Posted
Posted

I've gotten "no trailer connected" notice a few times.  The truck receptacle does move in the mount, but the dealer told me it's normal and they couldn't replicate my issue.  I'll double check my trailer wiring, but pretty sure it's the truck, not the trailer.

LSMAN New Member

LSMAN

Posted
Posted

I have an Airstream as well. (On my 4th one).  When I purchased my truck remotely in march 2020  and the dealer delivered it (2020 RST) , There was no brake controller for towing. I made it very clear that I have an airstream and the sales guy apologized for mistake. His boss allowed him to purchase an aftermarket controller for me. it was ordered and sent to me-  I installed it. Looks factory. (I installed something similar an  aftermarket controller in my 06 Silverado for my 1966 Airstream)

Sorry if I missed the obvious here but does your truck have a factory brake controller?  If not you need one. If it does have a controller her is what I would do: 

Check the grounds on both the trailer and the truck.  Bad Grounds cause most problems.  With trailer unhooked from truck use a 12 volt battery and power up the trailer lights individually: running lights, brake lights electric brakes. Verify that the problem is not on the trailer side first. make sure that you do not power up the emergency brake pull. If engage for long period powering this will burn up that (plunger switch with cable.) LED lights will not cause the above problem.

  • 4 years later...
Colin Wayland New Member

Colin Wayland

Posted
Posted
On 1/21/2022 at 11:53 AM, Dmax3 said:

I've gotten "no trailer connected" notice a few times.  The truck receptacle does move in the mount, but the dealer told me it's normal and they couldn't replicate my issue.  I'll double check my trailer wiring, but pretty sure it's the truck, not the trailer.

 

On 1/16/2022 at 5:03 PM, Shawn O'Leary said:

They did, it's the truck not the trailer. Fuses are present and all good. Going to the dealer Tuesday. 

What ended up fixing your issue Shawn? My grandpa is experiencing the exact same issue and cannot figure it out. Thanks.

Colin

davester Senior Enthusiast

davester

Posted
Posted

...just fyi, both Shawn and DMax haven't logged onto the site since around when this thrad was active, 4 years ago.  you aren't going to get a response from either user...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   5 Members, 0 Anonymous, 1,428 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Grumpy Bear
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Grumpy Bear · Posted

      Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • TrueBlue
      No Software Updates - Old Build

      By TrueBlue · Posted

      That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...