Spacers for the rear

[DEVV08]

Hello everyone, I’m new to this forum. I recently got my truck lifted. It has a 7inch RC strut lift. The shop who installed it added a 1/4 inch spacers on the front for clearance. I was wondering what size of spacers would I need for the rear so that matches the front. 

[shakenfake]

Gonna go on a limb here and say 1/4" 

 

Did you even try and measure?

[DEVV08]

The fronts measure out with the 1/4” spacer out to be 2” poke. The rear sit pretty flush with the finder. Idk if I need to go with 2” spacers in the rear to match the front? 

[shakenfake]

Take a piece of chalk and a tape measure and go straight back from the side wall of the front tire. 

Then measure from your rear tire to your chalk mark

 

That is how much

[DEVV08]

I measured after I got home from work. I used a 4 ft level up against the front tire outside wall and measured to the fender. I did the same with the rear. Definitely need a 2” spacer for the rear so that all 4 tires line up evenly.