Jump to content

2022 At4x Heads up display issues

Rockyah86
 Share

Recommended Posts

Rockyah86 New Member

Rockyah86

Posted
Posted

Hello everyone,

Need help. 2nd day I owned new truck, heads-up display started to become glitchy and would shut off then come back on. It would have colored vertical lines all over the place then half of the speed would show then shut off. Then it would come back on for a while then shut off. Any ideas? I have an email out to dealer but waiting for response. Too me it seems it could be as simple as a loose connections somewhere. I can't find anything on this truck since it's so new. Any suggestions would be appreciated. 

Transient Senior Enthusiast

Transient

Posted
Posted

Other than appearance, fictionalized your truck is no different than the 2020+ trucks.  Dash probably comes apart the same way, too.  Issues happen in manufacturing all the time.  It's a holiday weekend, so they'll likely be closed Monday.  This isn't a drivability issue, so don't expect a loaner while you're without your vehicle. 

Manny Man Enthusiast

Manny Man

Posted
Posted

I have a refreshed truck too. If you want to get to the dash speakers or the HUD module you just need to remove two bolts on each of the grab handles(passenger and driver) and pull out to remove the A pillars, then you can pull on the cover trim on the dash, pull straight up, clips only, no screws on the cover(long piece so be careful not to scratch anything with it). I'll try to find some pictures for you, but it's really easy to remove...

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 7/2/2022 at 12:05 PM, Rockyah86 said:

Hello everyone,

Need help. 2nd day I owned new truck, heads-up display started to become glitchy and would shut off then come back on. It would have colored vertical lines all over the place then half of the speed would show then shut off. Then it would come back on for a while then shut off. Any ideas? I have an email out to dealer but waiting for response. Too me it seems it could be as simple as a loose connections somewhere. I can't find anything on this truck since it's so new. Any suggestions would be appreciated. 

This is certainly not what we like to hear, Rockyah86.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your truck. To do so, please send an email to [email protected] with ATTN: Rockyah86/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

newdude Senior Enthusiast

newdude

Posted
Posted
On 7/2/2022 at 8:57 PM, Transient said:

Other than appearance, fictionalized your truck is no different than the 2020+ trucks.  Dash probably comes apart the same way, too.  

 

 

Can't really say its "no different."  AT4X dash is all new as is the SLE/SLT dash, neither are the "same" as 2019-2022.  Low trim get the old dash.  The 2022.5 are on the all new GM VIP (Global B) electrical architecture so many modules are all new compared to 19-22 which is Global A.  HUD parts are all new #s as well.  

  • Like 1
  • 2 weeks later...
ddc1279 Enthusiast

ddc1279

Posted
Posted
On 7/2/2022 at 10:48 PM, Manny Man said:

I have a refreshed truck too. If you want to get to the dash speakers or the HUD module you just need to remove two bolts on each of the grab handles(passenger and driver) and pull out to remove the A pillars, then you can pull on the cover trim on the dash, pull straight up, clips only, no screws on the cover(long piece so be careful not to scratch anything with it). I'll try to find some pictures for you, but it's really easy to remove...

 

Manny Man,

 

Is there any way you can show pictures of what to do to remove the refresh dash area to get to the dash speakers?  I want to replace my speakers but not 100% sure on what area needs to be removed.  I would greatly appreciate a visual reference.

Manny Man Enthusiast

Manny Man

Posted
Posted
On 7/17/2022 at 4:12 PM, ddc1279 said:

 

Manny Man,

 

Is there any way you can show pictures of what to do to remove the refresh dash area to get to the dash speakers?  I want to replace my speakers but not 100% sure on what area needs to be removed.  I would greatly appreciate a visual reference.

Hey, sorry for the delay.

here are some pictures of the piece that you have to remove. It’s just one piece, stretches across the entire dash and held on with clips.

as I said before, there are some tabs that extend into the A pillars so you’ll have to remove them in order to lift this piece straight up and remove it.

there are two bolts on each of the grab handles that you have to remove and then you just pull outward on the a pillar. Pretty easy job, you can’t really mess it up.

0B0A23E1-816E-4E01-92F1-88BEF49DF9C0.jpeg

063451E1-9217-473C-B734-6EE4FFCFFF27.jpeg

588366D6-987F-44B4-9F18-811B755DCE1D.jpeg

  • 2 years later...
Brad Tieman New Member

Brad Tieman

Posted
Posted

Rockyah86 I am having the same HUD issue as you described on my 2021 GMC Sierra 1500 AT4.  I checked all the IC fuses and they all looked fine.  Did you end up fixing the problem and what was the solution?

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 4/8/2025 at 3:53 PM, Brad Tieman said:

Rockyah86 I am having the same HUD issue as you described on my 2021 GMC Sierra 1500 AT4.  I checked all the IC fuses and they all looked fine.  Did you end up fixing the problem and what was the solution?

Our team is happy to connect you to a dealership who can take a look. If this may be of interest to you, please reach out to our team via email with your VIN, dealerships name and address, and your mileage. We are keeping a close eye out. By sending us a message, you consent to the information you provide being monitored and recorded by GM or those acting on GM’s behalf, subject to the GM Privacy Statement: https://www.gm.com/privacy-statement.

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,915
    Total Members
    8,960
    Most Online
    ChristopherDobson
    Newest Member
    ChristopherDobson
    Joined

  • Who's Online   3 Members, 0 Anonymous, 1,253 Guests (See full list)

  • Latest Articles

  • Posts

    • ChristopherDobson
      Vehicle Payments

      By ChristopherDobson · Posted

      Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • davester
      Possible lifter tick after DOD delete

      By davester · Posted

      yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...