Jump to content

Door handle button won't unlock truck

wurgs
 Share

Recommended Posts

Jaymlr New Member

Jaymlr

Posted
Posted

Thank You! Mine was off in the profile. Split tailgate hitch lockout wasn't disabling either. Dealership didn't know how to fix it. They are no help these days. 

  • 5 months later...
mikec17 New Member

mikec17

Posted
Posted
On 10/16/2023 at 10:03 AM, Eric Wurtz said:

 

For months I have been trying to find the answer to this question and everyone just kept saying oh you just turned the passive unlock setting off even though that was the first thing I checked. Your solution worked right away, thank you for finally posting the actual answer 

Made an account here just to say thanks, this worked on my 2022 Yukon XL as well. It was driving me nuts!

  • 3 months later...
Skyboost New Member

Skyboost

Posted
Posted

2024 Silverado 1500. 5 months old. Same issue. I followed the above guidance and it worked. Why is this suddenly happening without power transient issues, and without software update… is this a software or a firmware issue?

 

 It looks like GM is not willing or able to correct their software-firmware issues…. It’s time to get working on those electronic suppliers and more importantly, provide a better quality control… this should not keep happening year after year on so many vehicles. What else is not functioning as advertised? My system is often very, very slow to load and be functional after starting the vehicle. 😬🤨

2016 Sierra Owner Senior Enthusiast

2016 Sierra Owner

Posted
Posted
On 10/9/2023 at 11:48 AM, Usmc 89-01 said:

Press and hold the lock and unlock buttons on your FOB at the same time. This will reset the keyless entry on your door.

 

Thank you very much for this post!! My truck quit working the other day and I was going to take it to the dealer next week. I did what you posted and it reset the locks in about 30 seconds.

 

  • 2 weeks later...
redwngr Senior Enthusiast

redwngr

Posted
Posted

The door button for keyless access can be enabled or disabled using the fob.  

Enable/disable is the same pair of fob buttons

 

Possibly possible for them to get unintentionally pushed pushed when the fob is in  pocket. 

It's also seems that some updates set this feature to 'off'.

 

 

image.png.5f8ca919a33aceb3e5de42e266473955.png

image.png.c2b3adbc2e451e5f3339ee09b8a3c942.png

 

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,921
    Total Members
    8,960
    Most Online
    Enduro73
    Newest Member
    Enduro73
    Joined

  • Who's Online   5 Members, 1 Anonymous, 1,387 Guests (See full list)

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • No F-bdy Bs
      SERCICE ESC message?

      By No F-bdy Bs · Posted

      Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • newdude
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By newdude · Posted

      This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      I was unaware of that, thanks for updating me.
    • newdude
      2026 TurboMax L3B 2.7L: AFM/DFM present/disablable? [2026 Silverado 1500WT: 4WD RC RB 2.7L]3GCNKAEK9TG345558

      By newdude · Posted

      Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...