Jump to content

Recommended Posts

Posted
11 hours ago, lee3090 said:

All ready tried replacing the hood latch

Sorry, did replace, or attempted to replace?

 

Have you checked for stored codes? May be one linked to the HLS that needs to be cleared.

Posted
5 hours ago, JimCost2014 said:

Sorry, did replace, or attempted to replace?

 

Have you checked for stored codes? May be one linked to the HLS that needs to be cleared.

I put in a brand new hood latch from Gmpartsdirect and nothing changed and I checked for codes and didn’t find any

  • Like 1
Posted
4 hours ago, lee3090 said:

I put in a brand new hood latch from Gmpartsdirect and nothing changed and I checked for codes and didn’t find any

Age of battery in truck? When they start to fail, you will get random electrical issues.

  • Like 1
Posted
7 hours ago, JimCost2014 said:

Age of battery in truck? When they start to fail, you will get random electrical issues.

The battery is from 2018

Posted
11 minutes ago, lee3090 said:

The battery is from 2018

I would have it checked out, same age as mine and I am planning on replacing my this fall.

 

It will probaly come back as good, but the factory ones don't have a very long life.

Posted
On 9/21/2022 at 6:21 PM, JimCost2014 said:

I would have it checked out, same age as mine and I am planning on replacing my this fall.

 

It will probaly come back as good, but the factory ones don't have a very long life.

Battery tested good

  • 9 months later...
Posted

I have a 2014 GMC Sierra 1500 and mine is doing the exact same thing.  I have had my Alternator rebuilt just a month ago as well as earlier I was getting a "LOW Battery" message at every start up.  The battery is new and is an exact replacement as the factory.  It was replaced after starting to get the "Low Battery" message.  Since it did not change anything and was still starting the truck well, it probably did not require changing at the time.  The alternator was rebuilt and was not failing either but I did it to try to get the "Low Battery" light to stay off.
It seems that the "Hood is Open" message has not taken over from the "Low Battery" message.

I have gone through all the grounds and have also replaced the Battery Voltage sensor with a new one from GM.  I have still not found the cause of this issue.  I have gone over every inch of the wiring of the truck from battery to tail lights and there is no evidence of damage from critters or road wear.  I have also taken my truck to a vehicle wiring troubleshooter company with a great reputation who has upgraded all the modules on the truck and has gone over the wiring and connections and has found no issues or cause for this happening.
I am at a total loss as to why this is happening.
ANY PROVEN FIXES FOR THIS WOULD BE MUCH APPRECIATED.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...