Jump to content

Anyone tried a CW Limited Tonneau cover

sheamus
 Share

Recommended Posts

sheamus Enthusiast

sheamus

Posted
Posted (edited)

I came accross these "CW Limited" tonneau covers. They have a hard-trifold with free shipping within canada for quite a bit less than the brand names line BAK, Enthuze, etc. I am sure they aren't as good as the brand names ones... but are they decent, or just junk? They are about 40-70% cheaper than the brand name ones, so I am almost willing to take a chance... but it would be easier if someone on here had given one a whirl...

 

Here is a video of the model I am looking at. See any red flags here?: 

 

Edited by sheamus
  • 8 months later...
  • 1 month later...
  • 1 month later...
THE YETI Enthusiast

THE YETI

Posted
Posted

I recently ended up getting a Bison hard tri-fold for my Gladiator.  Didn't get any answers one any of the 3 cheapest I found.  Seems to be cood as any at it's price point.  I'm sure a bakflip might have been better but 3 times the price.

  • 10 months later...
MikeHanson New Member

MikeHanson

Posted
Posted

I’ve tried out a CW Limited tonneau cover last year. Only lasted roughly 6 months before the rubber hinges between the panels and seals along the sides split. The aluminum panels also started to become loose/delaminated. The plastic latches broke multiple times and I had to get replacements shipped out to me at least 3 times. Cheap Chinese imported covers. 
 

On a more positive note - I found a company Truck HQ located in Kitchener Ontario. They have tonneau covers at a similar price point as well as other truck accessories. The quality of their tonneaus seems superior to the top name brands out there. Myself as well as my friends/family have had tonneau covers and running boards from them without any issues. 

  • 1 month later...
MikePanson New Member

MikePanson

Posted
Posted (edited)

You're account was made August 1st, and you're only interaction ever on this site was August 1st with this comment. Almost like you work for Truck HQ 👎 shameless rep

Edited by MikePanson
THE YETI Enthusiast

THE YETI

Posted
Posted (edited)

says the guy who's account was made 7 minutes ago.  hahaha.  Im just stirring the pot but for real.  You may be correct but, just sayin.  My Bison is still attached but probably lesser quality than a Bkflip like I said before clips have broke had to pay 20x more in shipping than the part is worth when clips broke.  But the price was low as youll find.

Edited by THE YETI
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • BIGBOYS
      Doors lock and mirrors fold in while driving

      By BIGBOYS · Posted

      I have a 2015 Silverado and sometimes I can not get in to the truck. I use the key to unlock the driver door. Something is locking the truck when I unlock it, last night I left the truck open and this morning it was locked with the mirrors folded in. This happens while driving so it is now a safety issue. I reach down for the folding button and they open, then they close again.  Any advice, thank you,   Ed
    • Paul8556
      Headlight issue...

      By Paul8556 · Posted

      Did you ever find a resolution to this? my 2019 Silverado 1500 is showing the exact same headlights issues with the exact same symptoms.  would help a ton if anyone has any advice on this or better yet a known solution..
    • RyanbabZ71
      Gas Prices

      By RyanbabZ71 · Posted

      Wawa and Meijer here have ethanol free (88 & 89) I use for my mower and lawn equipment.  Its not much more than reg.  I paid $3.29 a few weeks ago.  
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • William Aldrich
      Bent valve in 2025 GMC Canyon Denali - Requires engine swap at 14K miles

      By William Aldrich · Posted

      NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...