Jump to content

Recommended Posts

Posted

here is a short video I made the next day after purchase the truck, I  have gm performance exhaust what I believe is borla Turing, correct me if I am wrong

enjoy, the   neighbors won't be happy everyday at 4:30am 

 

Posted (edited)

Sounds good. I'm debating the touring or the S type for my 6.2. Bout time your truck showed up!

Edited by 20Denali22
Posted
5 minutes ago, 20Denali22 said:

Sounds good. I'm debating the touring or the S type for my 6.2. Bout time your truck showed up!

I think touring is way to go sounds so deep and beefy  and when you cruise around 55 60 you can even hear it on the freeway you hear very little rumble, under acceleration sounds great,  day to day drive friendly. I love it.

Posted
15 minutes ago, Silverado4x4 said:

Going to sound 10x louder due to you being in the garage with the exhaust aimed inside the garage taking the video as the sound will be amplified.

Believe me it got  a bark when it fire, than come down after few sec, 

Posted

I had the Touring in my 2018 6.2L and my 2019 6.2L and while I liked it, I wanted something with a little more output. I decided to try something new and went with the S-type on my 2021 AT4 6.2L and LOVE it! I didn't want something as loud as the ATAK but something with a little more V8 sound than the Touring offered. The S-type is a perfect blend IMO. Every time I give it some pedal it makes me smile.

Posted

Sounds great!  I have been stuck in analysis paralysis on the Borla Touring or the S-Type.  The AWE and ATAK are just too damn loud for me.  No reason or need to wake up the neighborhood in the morning when I leave and drive up the hill out of my development.

 

Is the GM Performance Exhaust just a rebranded Borla Touring?  They want $2400 at the dealership vs $1370 from American Trucks.

Posted
On 10/24/2022 at 11:55 AM, SPASierra said:

Sounds great!  I have been stuck in analysis paralysis on the Borla Touring or the S-Type.  The AWE and ATAK are just too damn loud for me.  No reason or need to wake up the neighborhood in the morning when I leave and drive up the hill out of my development.

 

Is the GM Performance Exhaust just a rebranded Borla Touring?  They want $2400 at the dealership vs $1370 from American Trucks.

I know what a ripoff , the the exhaust was already on the truck and I wanted that truck so I took it, 

Posted

I have the factory performance and exhaust and CAI on my 2020 6.2 and love the noise. I believe that I read that this exhaust is made by Gm, not Borla as in the past…but I’m sure that GM “looked” at how Borla does it. 

  • 3 weeks later...
Posted

Well done!  I have this setup since 2019 and I smile each time it starts up - it never gets old.

 

I just had to replace my performance engine air filter (ACDelco 84428120), which was not easy to find.  They were not available at the dealer, but I finally found them in stock at Summit Racing.  Of course, your truck may use a different filter.  Either way, you might consider buying a replacement filter now before you need it.

ACDelco Filter.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,357 Guests (See full list)

  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...