Jump to content

Clunk/Vibration noise in front end after ALL suspension components replaced - steering rack the issue?!

midwestdenaliguy
 Share

Recommended Posts

midwestdenaliguy Enthusiast

midwestdenaliguy

Posted
Posted (edited)

Driving a 2016 Sierra Denali with 170k miles. I noticed a new clunk/rattle that occurred when hitting large enough bumps and/or driving on rough roads. Doesn't matter if I'm turning or driving straight. Speed also doesn't matter, but it's more noticeable when driving straight and going 25-40 mph. It was time to replace ball joints/bushings/coilovers in the front end anyway, so I figured that would take care of the issue. Unfortunately it did not, so the only guess I have left is the steering rack is going bad. I also noticed more than usual play in the steering wheel (granted it's slight) which is listed as a symptom of the steering rack going bad. I swear I have also heard a clunk when the steering wheel is full lock and I am reversing, but I haven't been able to reproduce it lately. Here's everything that I replaced on the front end:

 

- New coilovers from HaloLifts (2.5" lift). They replaced a previous set of coilovers from them that surprisingly lasted 80k miles - same 2.5" lift.

- New Cognito upper control arms/ball joints/bushings that replaced factory UCAs. I made sure they were designed to replace the factory cast iron UCAs that were installed on my year truck.

- New Moog cast iron lower control arms/balls joints/bushings that replaced factory LCAs.

- New Kryptonite outer tie rod ends on new ACDelco inner tie rods. When replacing the inner tie rods I checked the steering rack to see if the baffles came loose but I do not have them. I found a video of a mechanic who said he had a clunk complaint from a customer when turning and he replaced baffles that came loose inside the inner tie rod boot.

- New ACDelco CV axles.

- New Hellwig sway bar, bushings, and Duralast Gold sway bar links.

 

I torqued everything to spec and immediately took it in for an alignment after replacing everything. I had the shop double check everything and they said it was all tight. Truck was aligned so I was excited for my better riding, quiet truck. While the ride is smooth as can be now, the clunk/rattle still remains.

 

I then took it to a GM dealership near me in case the alignment shop and I missed something. They said everything was tight and even did an alignment that came back within tolerance - they didn't have to make adjustments. I had them check to see if there was play and/or noise in the steering rack and they said the bushings didn't move when turning the steering wheel back and forth and they couldn't hear anything on the test drive. I'm guessing they didn't drive over a rough enough road though.

 

Has anyone had a clunk/rattle when going over bumps get fixed when replacing the steering rack? Not the clunk when turning, but while driving straight. I don't want that to be the issue bc it's so expensive to repair, but it's the only guess I have left due to also having a slightly sloppier steering wheel. I also inspected the wheel well areas and entire front end, but could not find any loose parts. Thought maybe it could be the intermediate steering shaft, but that's quiet when I turn it from side to side. I'm at a loss and open to ideas.

 

Thanks.

 

Edited by midwestdenaliguy
  • midwestdenaliguy changed the title to Clunk/Vibration noise in front end after ALL suspension components replaced - steering rack the issue?!
midwestdenaliguy Enthusiast

midwestdenaliguy

Posted
  • Author
Posted

Ordered upper and lower intermediate steering shafts since it felt a little loose. Figured it's worth a shot since I have 170k miles and these joints are known to wear out and cause clunking noises. Went with the Dorman upper since it's beefier than the GM shaft and has great reviews. I'll circle back with results after I install them. Fingers crossed.

 

image.png.96219278824a1bf607fdca9478f02956.png

  • 1 year later...
midwestdenaliguy Enthusiast

midwestdenaliguy

Posted
  • Author
Posted

UPDATE - TL;DR The HaloLifts kit was the problem. I can no longer recommend HaloLifts.

 

Their design completely changed from the first set I had. They source their parts from Elka now and the ride is WAY softer than the original design. The front of the truck bounces up and down like an old school Cadillac. Also, the new design started squeaking and clunking not too long after install. It was time for me to update ball joints, sway bar bushings, end links, tie rods etc. so I assumed the noise/clunk was coming from one of those. Nope, everything got replaced and it was still there. Had a dealership look at my power steering rack and they couldn't find any issues.

 

I lived with the squeaking/clunking for a while, hoping I could pinpoint what it was after it became more obvious. Then it dawned on me maybe the newer HaloLift kit was the problem. I rocked and bounced the truck and sure enough the squeaking was coming from the front coilovers. After looking closely at them I could see what looked like grease coming out of the bushing on the top hat. Thought this may be the source of my clunk as well. So I took advantage of a black friday deal and bought the Eibach Pro Truck Stage 2R kit. Installed it this weekend and holy cow what an improvement. No more squeaking or clunking. The ride performance is perfect as well, not too soft or harsh. It takes bumps well and doesn't have all the roll/bounce that the HaloLifts did. 

 

I think part of the design issue on the HaloLifts front coils is the universal top hat they use. It has multiple holes to set the studs for different setups and uses a bushing at the top that allows the shock/coil to pivot all around vs staying in place like other designs. When I removed the coilovers the top hat was loose and sloppy. The bushing must have failed early. Looks like they should have used a top hat designed specifically for the Sierra/Silverado vs trying to save money on a universal top hat for various makes/models.

 

If interested, here's a link to the new setup I have from Eibach. Way better performance at the same price point.

 

https://eibach.com/product/E86-23-032-02-22?epsid=2282

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...