Jump to content

Recommended Posts

Posted

I have a 2016 suburban lt 2wd it can only tow 

6300 pounds it doesn’t have themax towing package is there anyway i upgrades some parts to get the max towing capacity of 8300? And what would i need 

Posted
On 1/18/2023 at 7:21 PM, Yaro said:

I have a 2016 suburban lt 2wd it can only tow 

6300 pounds it doesn’t have themax towing package is there anyway i upgrades some parts to get the max towing capacity of 8300? And what would i need 

 

 

Its all in the gearing.  "Max Trailer" on 2015-2020 Suburbans was 3.42 gears, larger radiator and the integrated brake controller.  That's it.  

 

You'd have to re-gear the truck to 3.42 gears (or taller if you really wanted to) and then have the truck tuned to the new gearing.

 

Radiator is actually the same radiator as a 1500 pickup with 3.42 gears, so you should be able to use your existing radiator.  

 

However, "legally" per your door jamb/VIN, its still only rated at 6300lbs and doesn't raise the GVWR and GCWR ratings, no matter what you add to it.  If you were towing and involved in an accident, they can find out the GCWR (truck and trailer total weight combined) and if you are over, won't be good on your end insurance wise.  

  • Like 1
  • Thanks 2
Posted
45 minutes ago, newdude said:

 

 

Its all in the gearing.  "Max Trailer" on 2015-2020 Suburbans was 3.42 gears, larger radiator and the integrated brake controller.  That's it.  

 

You'd have to re-gear the truck to 3.42 gears (or taller if you really wanted to) and then have the truck tuned to the new gearing.

 

Radiator is actually the same radiator as a 1500 pickup with 3.42 gears, so you should be able to use your existing radiator.  

 

However, "legally" per your door jamb/VIN, its still only rated at 6300lbs and doesn't raise the GVWR and GCWR ratings, no matter what you add to it.  If you were towing and involved in an accident, they can find out the GCWR (truck and trailer total weight combined) and if you are over, won't be good on your end insurance wise.  

 

I love practical useful information. 

  • Thanks 1
Posted

When I used to haul equipment my trucks weren’t registered to haul the equipment by itself. It needed a trailer with trailer brakes. I registered my combination to haul 25K. And was insured to do so. My loaded equipment would be centered to where my dually would drop about an inch. My vacuum over hydraulic brakes could easily stop the load without any help from the truck. I had to stop at weigh stations and have a log book. The truck and trailer had to pass DOT inspection. I think when I stopped hauling 1 tons were advertised to handle 14K. Now there’re advertising 25K. Basically the horsepower and TQ is the difference. My trucks unmodified were tack out at 65 mph in direct drive. The speed limit at the time. You couldn’t pull in overdrive. About 1 million miles pulling no accidents, no tickets, no problems. Trucks today almost drive themselves. 400 or more horsepower, 1000 ft lbs of TQ. Trailer cameras, backup cameras I would’ve thought I died and went to heaven. My last 1/2 ton had as much hp and TQ as my first hauling truck. People have it easy now.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...