Jump to content

Recommended Posts

Posted

2020 GMC Sierra 1500 AT4, 6.2L

 

During moderate to heavy rains the truck will sometimes put itself into remote learning mode, preventing the vehicle from starting. Unplugging the negative battery connection and re-pluging it in usually fixes it, but once it got stuck in the remote pairing overnight and another time required a tow to the dealer who couldn't replicate the problem.

 

Figured it was a software issue but no updates seem to have helped. My guess is water is getting somewhere it shouldn't, but I don't know where to check. Any suggestions?

Posted

Newdude found out the drivers door switch could cause it. Sounds like that switch is getting wet.

 

 

  • 2 weeks later...
Posted
On 1/20/2023 at 5:51 PM, GrizzlyJohn said:

2020 GMC Sierra 1500 AT4, 6.2L

 

During moderate to heavy rains the truck will sometimes put itself into remote learning mode, preventing the vehicle from starting. Unplugging the negative battery connection and re-pluging it in usually fixes it, but once it got stuck in the remote pairing overnight and another time required a tow to the dealer who couldn't replicate the problem.

 

Figured it was a software issue but no updates seem to have helped. My guess is water is getting somewhere it shouldn't, but I don't know where to check. Any suggestions?


This is certainly not what we like to hear, GrizzlyJohn.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 GMC Sierra 1500 AT4. To do so, please send an email to [email protected] with ATTN: GrizzlyJohn/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 1 year later...
Posted

Just my experience, I would get in my truck and it would sometimes say remote learning and sometimes wouldn't but it wouldn't even start or going into accessory mode. I always had to hold the start stop down for 12 seconds in order for it to stop the learning mode in order to start up. My issue was the window switch that I was able to buy off Amazon for 38$. I no longer have this issue. Hope it helps anyone with the same issues.

  • Thanks 1
  • 7 months later...
Posted (edited)
On 9/2/2024 at 9:24 AM, Sean13450 said:

Just my experience, I would get in my truck and it would sometimes say remote learning and sometimes wouldn't but it wouldn't even start or going into accessory mode. I always had to hold the start stop down for 12 seconds in order for it to stop the learning mode in order to start up. My issue was the window switch that I was able to buy off Amazon for 38$. I no longer have this issue. Hope it helps anyone with the same issues.

I'm  in the exact same boat as almost everyone here.  37K miles and truck has never had an issue.  It did it once, dead battery, replaced battery, seemed to fix it for a week.  One day dead battery out of the blue.  Charged on charger until full capacity on the new battery.  Came out literally after 1 hour....stuck in program mode.  Undid the negative cable, it reset and it was fine.  Came out 30 min later....stuck in program mode.  My negative cable post assembly was a little loose...grasping for straws here, so I replaced.  All was well for 10 days.  Came out one morning, stuck in program mode.  I finally take it to the dealership.  They keep it for a week and do drawdown test, nothing drawing the battery down, can't replicate the issue, so they aren't doing anything.  I told them to read the service bulletin about the door latch assembly and window switch.  They literally are disregarding it unless they can replicate it, even though the bulletin says it can't be replicated.  I may just change the window switch and see what happens, or just go ahead and replace both the door latch and window switch.  So frustrating.

Edited by scokill
Posted (edited)
On 1/20/2023 at 4:51 PM, GrizzlyJohn said:

2020 GMC Sierra 1500 AT4, 6.2L

 

During moderate to heavy rains the truck will sometimes put itself into remote learning mode, preventing the vehicle from starting. Unplugging the negative battery connection and re-pluging it in usually fixes it, but once it got stuck in the remote pairing overnight and another time required a tow to the dealer who couldn't replicate the problem.

 

Figured it was a software issue but no updates seem to have helped. My guess is water is getting somewhere it shouldn't, but I don't know where to check. Any suggestions?

Update Went out day before yesterday battery was dead as a doornail.  Heavy, heavy rain.  I investigated more thoroughly and found damp carpet by rear door.   Kept looking and it was wet further towards the back of the cab.  Look up and the headliner was wet and even more wet on the passenger side all the way at the back.  See water dripping from back glass.  Evidently water was shorting an electrical connection somewhere.  Once it dries, it goes back to normal.  The problem is the rear glass frame is plastic and cracks, known problem for several years of Chevy and GMC trucks.  There a TSB for it but no recall and help getting fixed from GM is random.  I fixed it myself and this video outlines how to fix, as does the TSB.  The only other option is the get the whole back glass replaced for $1,000 or more.

Edited by scokill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Indeed a proper drain tap or drain valve with adapter that has a hose on it that opens up the valve as the adapter goes on is a slick setup and have that for certain highway tractors etc and other equipment that came from the factory with a tap but this L8T is pretty darned good other than me doing it on the floor and easy to touch hot exhaust and am not as agile as I used to be !. If I really want to pull a hot filter on an engine I will use an insulated set of thick neoprene gauntlet gloves but I am not in the hurry I used to need to be so things are done more relaxed and in theory somewhat safer ... I think LOL.    And as I mentioned the unique shape of the Amsoil 1 quart containers, while they might not work as well as an offset pour spout container for some awkward engine location applications, they are working a lot better with my Lisle funnel kit because of how they prop up on all four corners when upside down resting on the rim of the funnel where the typical quart container would never stay put without holding onto it. 
    • Well, I just hit 100K a few weeks back, and I can honestly say I have not had any major issues with my '21 5.3 Crew cab.  I have done most routine maintenance, oil changes, air filter, tire rotations, and a transmission drain and filter change (not even a full flush).  A couple of months ago, I started experiencing the dreaded CLUNK when coming to a stop, sometimes hard enough to literally push the truck forward! After researching here and in other forums/youtube videos, etc, I was thinking it's the slip yoke. I finally had a chance to take it to my local mechanic today, and he was not able to recreate the issue.  Amazing, since it does it nearly every time I drive.  He also said he can't simply grease my slip yoke/driveshaft splines, because I have a 1 piece driveshaft.  I am not sure what else I can do.  Has anyone else had this issue or have any idea what else it could be?
    • This is where the Fumoto drain valve comes in handy.  No mess and able to change oil hot, like right off the interstate hot.  Flows nice and you can direct it into a container. As for the oil filter, I use an old dixie cup or plastic one from McDonalds. It contains the oil as you pull the filter down and not all over your hand.
    • Well, if it did change from lifters to rocker arms, at least it would be easier to fix as they fail.
    • Doesn't hurt to try.  It's my understanding that you have to run it at least 4 or 5 oil changes for things to get clean.  Think about it, your engine didn't get dirty in just an oil change so over time it will slowly clean. It's the safest way to do it and not have seal issues.      I remember  a product that came out a long time ago, AutoRX, it was an additive you put in the oil and then drove for 3k miles. Some saw improvements and some didn't. It was suggested to use a non synthetic with it at the time. Same observation, use a couple oil changes and give it time to work. It also stated it worked best if you could drive on trips to keep the oil hot.  I'm sure if you ask AI it could tell you all about it.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...