Jump to content

2024 Wiring light bar into high beams

CRApex

By CRApex
in Modifications & Accessories

 Share

Recommended Posts

CRApex Enthusiast

CRApex

Posted
Posted

On my 2020 it was easy, install the bar, hook up power and tap the high beam fuse in the fuse box, no splicing.   I went to install a new bar on my 2024 High Country and all was going as planned until I got to the high beam fuse…there isn’t one.  Just two fuses for the right and left headlamps.   Any thoughts?  Or just install a separate switch which I really don’t want to do.    It was super nice having it come on with the high beams.

  • 7 months later...
  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

CRApex
CRApex

I ran the power from the battery but on the previous gen (2023 and older) you could tap the high beam fuse to activate the relay.  The 2024 doesn't have a high beam fuse that I could find.  

CRApex
CRApex

Unfortunately no.  I have a wireless remote setup that works but still not as convenient as tapping the high beam circuit.   Do you need a switch in the cab if you're only adding an under hood light?

flymhi
flymhi

I think I have found a spot to use as a trigger for the high beams (K9 BCM X2 pin 32 <wh>).  Just finished putting a light bar on my 24 Ulti-D.  I installed the upfitter switches and am happy wi

Posted Images

Dan Lamothe New Member

Dan Lamothe

Posted
Posted

Hi there,

Same thing for me..... crazy

That just happen to me so, did you find a way to do it yet?

also the 12v lighter output only works when the truck is on? 

anyone have any suggestion?

CRApex Enthusiast

CRApex

Posted
  • Author
Posted

I ran the power from the battery but on the previous gen (2023 and older) you could tap the high beam fuse to activate the relay.  The 2024 doesn't have a high beam fuse that I could find.

 

I ended up installing a wireless remote that clips to my visor, I didn't want to do any drilling or fishing of wires into the cab.  I would still prefer them to be on the high beam circuit but after extensive searching couldn't find any solutions on the web.

  • Like 1
  • 6 months later...
monarksteve Enthusiast

monarksteve

Posted
Posted

Did you ever find a spot or a fuse that would work? Iam having the same problem with led strip light for under the hood.

 

Steve

CRApex Enthusiast

CRApex

Posted
  • Author
Posted

Unfortunately no.  I have a wireless remote setup that works but still not as convenient as tapping the high beam circuit.   Do you need a switch in the cab if you're only adding an under hood light?

  • Thanks 1
  • 1 month later...
flymhi Enthusiast

flymhi

Posted
Posted (edited)
On 8/12/2024 at 11:00 AM, monarksteve said:

Did you ever find a spot or a fuse that would work? Iam having the same problem with led strip light for under the hood.

 

Steve

I think I have found a spot to use as a trigger for the high beams (K9 BCM X2 pin 32 <wh>).  Just finished putting a light bar on my 24 Ulti-D.  I installed the upfitter switches and am happy with the way it turned out.  I ordered some tap-splices.  I'll let you know how it works out.

IMG_0539.jpg

IMG_0524.jpg

Edited by flymhi
  • Thanks 1
flymhi Enthusiast

flymhi

Posted
Posted
2 hours ago, rjgvt said:

@flymhi

 

Where did you install the upfitter switches?

This was the only place to put them without disassembling the entire dash

IMG_0537.jpg

slj2008 Senior Enthusiast

slj2008

Posted
Posted
10 hours ago, flymhi said:

I think I have found a spot to use as a trigger for the high beams (K9 BCM X2 pin 32 <wh>).  Just finished putting a light bar on my 24 Ulti-D.  I installed the upfitter switches and am happy with the way it turned out.  I ordered some tap-splices.  I'll let you know how it works out.

IMG_0539.jpg

g

Look's good. is it on top of bumper, or is there a space between bumper an grill ??

rjgvt Enthusiast

rjgvt

Posted
Posted

@flymhi

 

Nice place for the upfitter switches. I put a 12v socket in that location and brought the wires through the dash at the  harness near the steering wheel.

 

Was the rest of the upfitter install the same as the other model trucks for the dash mounted fuse block?

 

 

12v socket on dash.jpg

Finished 12v socket.jpg

newdude Senior Enthusiast

newdude

Posted
Posted
On 8/12/2024 at 3:28 PM, CRApex said:

Unfortunately no.  I have a wireless remote setup that works but still not as convenient as tapping the high beam circuit.   Do you need a switch in the cab if you're only adding an under hood light?

 

 

Fuse F3 (left lamp, the wire is red/white stripe) and Fuse F4 (right lamp, the wire is red/yellow stripe) are the 20 amp fuses to the headlights, and the batt + wire circuits.  

 

What gets complicated is these use a lighting control module now with the LED lamps.  Fuse F7 (right) and fuse F31 (left) in the underhood block are the high beam control signals for the high beams.  

 

So its a bit of being cautious to try and wire up a bar to these somehow.  You'd have to see if you can have the signal wire there to actuate with the high beams.  Problem is to try and not overload the lighting control module.

 

IMO, the upfitters and switched or an aftermarket switch setup might be the safest route.  

CRApex Enthusiast

CRApex

Posted
  • Author
Posted
18 minutes ago, newdude said:

 

 

Fuse F3 (left lamp, the wire is red/white stripe) and Fuse F4 (right lamp, the wire is red/yellow stripe) are the 20 amp fuses to the headlights, and the batt + wire circuits.  

 

What gets complicated is these use a lighting control module now with the LED lamps.  Fuse F7 (right) and fuse F31 (left) in the underhood block are the high beam control signals for the high beams.  

 

So its a bit of being cautious to try and wire up a bar to these somehow.  You'd have to see if you can have the signal wire there to actuate with the high beams.  Problem is to try and not overload the lighting control module.

 

IMO, the upfitters and switched or an aftermarket switch setup might be the safest route.  

Thanks for the info! 

 

My current setup is safe and works but...I'm going to have to test this.  I just need it to trigger the relay, I wonder how they do it with a plow setup?  

KTDanforth Enthusiast

KTDanforth

Posted
Posted
12 hours ago, flymhi said:

I think I have found a spot to use as a trigger for the high beams (K9 BCM X2 pin 32 <wh>).  Just finished putting a light bar on my 24 Ulti-D.  I installed the upfitter switches and am happy with the way it turned out.  I ordered some tap-splices.  I'll let you know how it works out.

IMG_0539.jpg

IMG_0524.jpg

Good Looking effect/Truck

flymhi Enthusiast

flymhi

Posted
Posted
2 hours ago, slj2008 said:

Look's good. is it on top of bumper, or is there a space between bumper an grill ??

The space between the grill and bumper is perfect for the Lasfit 42" bar.

IMG_0297.jpg

IMG_0306.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • silveradosid
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By silveradosid · Posted

      same here , i have a 2020 first gen and the cost to repair these engines far excedes replacement
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      But Grumpy I did show several subdivisions that had homes starting in the 170K range. If you bought a Townhouse or Condo you could go cheaper. Same with a car 3000 dollars in the 70s translates to around 20K today. There are several models at that price. You actually get more for the money. In the 70s I drove a 3000$ car bought a 28K home and made 4.50 per hour. Thank goodness for overtime. Today I could buy a 170K house drive a 20K car and make 25 dollars an hour operating the same machine today. The difference the house, car, machine would be better and have AC. And I wouldn’t be taxed on overtime. And statistically your wife works too. Easing the burden. I thought we agreed to disagree. I brought receipts earlier, showing examples. I think you’re more stubborn than me. I was done with this debate. 
    • Coastie05
      Replacing 2.7L on 2021 Silverado with 2023 2.7L

      By Coastie05 · Posted

      I’m definitely interested to hear the end result here. 
    • MASONV88888888
      Another 6.2L engine failure!

      By MASONV88888888 · Posted

      My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...