Rocker switch wiring to Accessory power

[Vincej138]

I am second guessing myself here so just want to see if anyone else has done or can clarify. Installing some A-pillar lights on my 22' Custom with Baja Designs XL Pro's and their wiring harness. I got a 5-pin rocker with Pillar logo on it to use instead of the 3-pin little round one that comes with. My hang up is i can bridge the rocker and just have it light up when it turns on, but I would prefer for the lower led logo light come on when it goes key on. Is there a wire or fuse on in the box on D/S or P/S that anyone can confirm is accessory on? If so, I can just fuse tap that and run it to the pin on the ricker correct, then rest back to battery like normal. So option A on the rocker with a single wire to the wire/fuse I tap into correct? Fuse 32 from what ive researched? Option B is easy enough worst case. Rocker will be mounted where stock trailer brake blank plug is. Thanks for the help

 

Here is how the harness is laid out and then the rocker option

Edited December 21, 2023 by Vincej138

[silveradosid]

read this post, it will tell what fuses you can use and fuse taps